Canon CREATIVE PARK Pop-up Card User manual

The Assembly instructions are divided into three blocks:
A (Card), B (Animals, Decorations).
Follow the instructions for each block to assemble your card.
<Caution>
Keep scissors and glue away from small children.
Be careful not to cut your fingers when using scissors.
Pop-up Card (New Baby) : Assembly Instructions
Katsuyuki Shiga(PinoArt) Canon Inc.
Page
Assemble the card
Use pattern: Page2, Page3.
Cut out A1 by cutting along the lines.
Cut along the line marked .
Scissors line
Mountain fold
Parts No. / Parts name
Make a mountain fold on A1.
Trace along the mountain fold line with a stencil pen, scoring it
to make it easier to fold.
Using the photo as a guide, attach in the direction of the arrow.
Attach A1 and A2, and the card is complete.
Check that A1 and A2 are the right way up,
place some paste on the blue area of the
back side, and attach them together.
Notation Key
Scissors
Paste, or woodwork glue
Stencil pen, or bodkin
Ruler
Tools
Numbers of parts
to be attached
Scissors line
Mountain fold
Valley fold
Glue spot
Parts No.

Glue B1 to the card.
After attaching the parts, open and close to check if the card
opens smoothly.
Katsuyuki Shiga(PinoArt) Canon Inc.
Page
Pop-up Card (New Baby) : Assembly Instructions
Make the animals and decorations
Use pattern: Page4, Page5.
Open and close to check
that it moves.
Glue B2 to the card.
Glue B7,B8,B9 and B10 to the card.
Attach B11 and B12 to the card, and you're done!
Glue B3 and B4 to the card.
Glue B5 and B6 to the card. Open and close to check
that it moves.