Canon Creative Park Hippopotamus User manual

A1 Left eye
Hippopotamus : Assembly Instructions
Assemble the head
Katsuyuki Shiga(PinoArt) Canon Inc.
Page
Use pattern: Page2 to Page4.
Cut out A1 by cutting along the lines.
Cut along the line marked .
Parts name
Parts No.
Glue spot
Scissors line
Cut a slot right into
the apex of the
triangular glue tab.
Triangular glue tab
A1 Left eye
Make a valley fold on A1.
Trace along the valley fold line with a stencil pen, scoring it to
make it easier to fold.
Using the photo as a guide, move your fingers in the direction of the
arrow, adjusting the pressure to curl the paper.
The parts will be easier to assemble if curled.
Attach the triangular glue tabs so that the front side becomes convex.
Add a slight curl to A1 when attaching it.
Using the photo as a guide, attach in the direction of the arrow.
Notation Key
Tools
Scissors line
Mountain fold
Valley fold
Glue spot
Glue reverse side
Parts No.
The Assembly instructions are divided into four blocks: A (head),
B (body), and C (legs and body). Follow the instructions for each
block to assemble your hippopotamus.
<Caution>
Keep scissors and glue away from small children.
Be careful not to cut your fingers when using scissors.
marks a basic assembly technique that remains the same
regardless of the part.
Instructions are printed only for the first instance.
Scissors
Paste, or woodwork glue
Stencil pen, or bodkin
Ruler
Pencil

Hippopotamus : Assembly Instructions
Katsuyuki Shiga(PinoArt) Canon Inc.
Page
Attach A1 and A2 to A3.
Assemble A4 and A5, and attach the eyes.
Attach A6 and A7 together, and attach A8.
Assemble A9, A10 and A11. Assemble A12, A13 and A14
in the same way, and attach them to A8.
Assemble A15 and A16,
and attach them to the assembled mouth.
Attach A17 to A8, and attach the tusks.
Put glue
on the edges
of the back of the parts too.
Attach the eyes and mouth together.
Assemble A22 and A23, and attach them to the head.

Hippopotamus : Assembly Instructions
Katsuyuki Shiga(PinoArt) Canon Inc.
Page
Glue and assemble A24 and A25. Assemble A26 and A27
in the same way,
attach them to the head, and the head is complete.
Put glue on the edges
of the back of the parts.
Assemble the body
Use pattern: Page5 to Page9.
Assemble B1 and B2, attach them to the neck.
Attach B3 and B4 together, and attach B5.
Put glue on the edges
of the back of the parts.
Attach B1 and B2 to the body.
Assemble B6, B7, and B8, B9.
Attach B6, B7 and B8 ,B9 to the body in order.

Hippopotamus : Assembly Instructions
Katsuyuki Shiga(PinoArt) Canon Inc.
Page
Assemble the legs and body
Use pattern: Page10.
Assemble B10 and B11, paste them to the body.
Attach B12 to the body.
Glue B13 to B10 and B11, and the body is complete.
Assemble C1, C2, C3, and C4, C5, C6.
Attach C1, C2 and C3 to the body in order.
Use a pencil to hold down.
In the same way, attach C4, C5 and C6 to the body in order.
Assemble parts C7 and C8, C9, C10.
Without adding glue, fit the feet to the legs so that they
stand on the ground. Next, attach them in parts order,
and your hippopotamus is complete!
Align the seams on each part.
The heel of C9
should be off the ground.
Put glue on the edges
of the back of the parts.
Align the seams on each part.