Canon Thoroughbred User manual

Assembly Instructions: Three A4 sheets
*Read the Assembly Instructions carefully in page order referring to the page numbers on the
parts list.
*It is easy to get pieces mixed up if you cut them all out at once, so just cut the pieces as you
need them.
*l indicates a part for the left side, and r is for the right. For example, Er01would be a part for
the right side, but E01 would mean that it can be used on either the right or the left side.
(dotted line)
Make a mountain fold.
(solid line)
Cut out.
(dotted and dash line)
Make a valley fold. Cut a slot.
Scissors, set square, glue (such
as wood work glue), metal rod,
spatula, a used pen, toothpicks,
tweezers (useful for handling small
parts).
Before gluing, crease the paper
along mounrain fold and valley fold
lines andmake sure rouned
sections are nice anr stiff.
This craft requires the use of glue,
scissors, tweezers, and other tools
which may be dangerous to
young children. Please keep them
out of reach of children while you
work.
Thoroughbred: Assembly Instructions
1. Use a set square or ruler
and a dried up pen to score
along the dotted lines, and
fold along them to make
creases.
2. Work curves into the pieces
using a metal rod before
beginning assembly.
For small pieces, add curves
before cutting them out.
3. Use scissors to cut along
the solid line.
4. The pale-colored numbers
on the glue tabs indicate the
number of the part to be
attached there.
Use a spatula for the small
glue tabs.
Parts list (pattern): Ten A4 sheets
Mountain fold line Cut line Valley fold line
(solid line)
Slot line
Tools and Materials Assembly tip Caution
Instructions
PAGE01
The Thoroughbred is a breed of horse first developed during the 17th and 18th
centuries in England, by crossbreeding Arabians with native horses to produce
superior racing horses.
The Thoroughbred has been called the ultimate work of art ever produced by man,
and has a height of around 160 to 170cm (to the shoulders), weighing between 450
and 500kg. Its well-developed chest and hindquarters make it a fast runner. It can
run at speeds of up to 60 or 70km/h for minutes on end, even with a 50kg rider on its
back.
However, its thin legs are prone to injuries.
In terms of temperament, it is a very delicate horse, sensitive to loud noises and
bright lights.

Thoroughbred: Assembly Instructions
B09
B10
B11
Fr01
Fr02
Fr03
Fr04
Fr05
Fl01
Fl02
Fl03
Fl04
Fl05
B05 B06 B07 B08
Lr01
Lr02
Lr03
Ll01
Ll02
Ll03
B01
B02
B03
B04
T04
T03
T02
T01
Cut the tip of the
tail so that it is
jagged, and slightly
curl the pieces
inwards.
Glue all the parts so that they become cylindrical,
and then glue them to each other, working in order from the lowest number.
Parts Required
Page4,5
Parts Required
Page2,3,8
Caution: Glue tabs have been omitted from the
diagrams to make them easier to understand.
When you have assembled the forelegs,
attach them to the body.
Glue between the forelegs.
Glue between the hind
legs.
© Canon Inc.
© Kyoichi Shimazaki(Ghost Maker)
PAGE02

Thoroughbred: Assembly Instructions
Ll04
Lr04
Fr06
Fl06
B12 B13
B14
H08
H07
H09
H06
H05
H04
H03
H02
H01
El01
Er01
H07
H06
El01
El02
Er01
Er02
11
2
344
55
H03
H02
H01
D07 D06
D05
D04
D04
D03
D03
D02
D02
D01
Fold the D07 parts
in half and glue
them to D01.
Fold the D06 parts
into U shapes, and
glue them so that
they fit the hoof prints.
Adjust the Thoroughbred so that it is standing straight,
and attach the hooves to the legs.
Glue B14 and H08 together last.
After gluing the mane together,
cut along the jagged line and
add curves to whichever parts
you like.
Slightly curve the forelock H09
downwards.
Glue the ear part E01 so that
it becomes cylindrical.
Curve E02 and glue it inside E01,
and trim away any protruding parts.
How to attach the ears
Fold the glue tabs on H06 and H07
inwards, and insert the cylindrical-shaped
ears into the holes that form,
attaching them inside.
The holes may seem a little big,
but if you put the ears in the center
and tilt them slightly forward they
should fit neatly.
Adjust the angle of the ears to your liking.
Parts Required
Page6,7
Parts Required
Page2,5
Parts Required
Page7~10
© Canon Inc.
© Kyoichi Shimazaki(Ghost Maker)
PAGE03