Canon CREATIVE PARK Manta ray User manual

A1 Back
Triangular glue tab
Glue tab
Parts name
Scissors line
Parts No.
Manta ray : Assembly Instructions Page
Scissors
Paste, or woodwork glue
Stencil pen, or bodkin
Ruler
Scissors line
Mountain fold
Valley fold
Glue spot
Parts No.
Notation Key
Tools
<Caution>
Keep scissors and glue away from small children.
Be careful not to cut your fingers when using scissors.
marks a basic assembly technique that remains the same
regardless of the part.
Instructions are printed only for the first instance.
The Assembly instructions are divided into two blocks:
A (body, fin, tail) and B (display stand, coral).
Follow the instructions for each block to assemble your manta ray.
Assemble the body, fin and tail
Use pattern: Page2 to Page4.
Cut along the line marked .
Cut out A1 by cutting along the lines.
Make a mountain fold and valley fold on A1.
Trace along the mountain fold line and valley fold line with a
stencil pen, scoring it to make it easier to fold.
The parts will be easier to assemble if curled.
Using the photo as a guide, move your fingers in the direction of the
arrow, adjusting the pressure to curl the paper.
Attach the triangular glue tabs so that the front side becomes convex.
Add a slight curl to A1 when attaching it.
Using the photo as a guide, attach in the direction of the arrow.

Put glue on the parts indicated in blue, and
attach together in line with the part's shape.
Apply glue to the area
marked by the blue line.
Attach A12 in the same way.
Make this area indented.
Apply glue to the area marked by the blue line.
Apply glue to the area marked by the blue line.
Manta ray : Assembly Instructions Page
Attach A2 and A3 to A1.
Attach A4 and A5 to the body.
Attach A6 and A7, and attach them to the body.
Attach A8 and A9 to the body.
Attach A10 to the body.
Attach A11 and A12 to the body.
Attach A13 and A14, and attach them to the body.
Attach A15 to the body.

Assemble the display stand and coral
Use pattern: Page5 to Page8.
Curl.
Put glue on the parts
indicated in blue, and
attach the two halves
together.
Apply glue to the area
marked by the blue.
Attach in accordance with the lines on A10.
Apply glue to the area
marked by the blue line.
Attach A15, and attach A16 to the body in the same way.
Assemble A17 and A18, attach them to the body,
and your manta ray is complete.
Attach B1, B2 and B3 together.
Assemble B5, B6, B8 and B10.
Next, attach parts B4 ~ B10 to B1.
Page
Manta ray : Assembly Instructions
In the same way, attach parts B11 ~ B17 to B2.
Attach the manta ray to the display stand, and you're done!