Canon Osaka Castle, Japan Quick start guide

Assembly Instructions : Seven A4 sheets (No.1 to No.7)
Before starting assembly:Writing the number of each
section on its back side before cutting out the sections is
highly recommended.
(* This way, you can be sure which section is which
even after cutting out the sections.)
Indicates where sections should be glued together.
Fold in this direction.
Osaka Castle, Japan : Assembly Instructions
©
Canon Inc.
©
PAOPAO. Inc
Assemble the stone wall.
Attach the opposite side
in the same way.
Attach the opposite side
in the same way.
* This model was designed for Papercraft and may differ from the original in some respects.
* Build the model by carefully reading the Assembly Instructions, in the parts sheet page order.
Assembly Instructions
* Hint:Trace along the folds with a ruler
and an exhausted pen (no ink) to get a sharper, easier fold.
1

Osaka Castle, Japan : Assembly Instructions
©
Canon Inc.
©
PAOPAO. Inc
Assemble the first level.
Attach the opposite side
in the same way.
Attach the opposite side
in the same way.
Fold in from the back
and glue in place.
Back
Attach the opposite
side in the same way.
Fold in from the back and glue in place.
Attach the opposite side in the same way.
Bottom
Assemble the second level.

Osaka Castle, Japan : Assembly Instructions
©
Canon Inc.
©
PAOPAO. Inc
Assemble the third level.
Attach the opposite side
in the same way.
Fold in from the back
and glue in place.
Attach the opposite side
in the same way.

Osaka Castle, Japan : Assembly Instructions
©
Canon Inc.
©
PAOPAO. Inc
Assemble the fourth level.
Attach the opposite side
in the same way.
Fold in from the back
and glue in place.
Attach the opposite side
in the same way.

Osaka Castle, Japan : Assembly Instructions
©
Canon Inc.
©
PAOPAO. Inc
Assemble the fifth level.
Attach the opposite side in the same way.
Fold in from the back
and glue in place.
Attach the opposite
side in the same way.
Attach the opposite
side in the same way.
Glue this part in place
astride part 33.
Center this part visually
when attaching it in place.

Osaka Castle, Japan : Assembly Instructions
©
Canon Inc.
©
PAOPAO. Inc
Assemble the base.
Before attaching the parts, draw horizontal and vertical lines
intersecting at the center of the bottom sides of parts 35 and 36.
Bottom view
Turn the base over and attach this part
in line with the marks you made in step 2.
After gluing part 39 in place, turn the base over
so that its top faces up again.
http://www.canon.com/c-park/en/
©
PAOPAO. Inc
http://www.canon.com/c-park/en/
©
P
AOP
AO.Inc

Osaka Castle, Japan : Assembly Instructions
©
Canon Inc.
©
PAOPAO. Inc
Assemble the white walls. Finish assembling the entire castle.
* Match the numbers on the marks
when gluing these parts in place. Finished!