Canon CREATIVE PARK Moving Money Box: Pig User manual

Moving Money Box : Pig [Assembly Instructions]
Drop in a coin and
watch the money box move!
It's so cute that you won't
be able to stop saving!
The movements work
better with heavier coins.
His nose and ears flap up and down!
Tools Tips for a neater finish
Symbols
Caution
Ruler, a sharp, pointed object, toothpicks,
scissors, glue
Mountain fold
Valley fold
Cut out
Cut a slit
Glue spot
Line a ruler up with the dotted lines, and use a sharp, pointed
object (eg. a dried-up pen) to score along the fold lines. Carefully
make mountain and valley folds to make clean creases on each
part.
If using craft glue, pour some glue onto scrap paper and use a
toothpick to apply it in a thin layer. This will achieve a neater finish.
This paper craft uses glue, scissors, etc, so please be sure to keep
them out of reach of children while working.

Moving Money Box : Pig [Assembly Instructions]
Cut &
Fold
Glue Body
Carefully cut out all the parts, and fold and make creases along the fold lines.
Put glue on the inside, fold in half, and attach together.
After gluing, fold and make sharp creases.
When gluing large areas, apply a thin layer
of glue and be sure to work quickly.
Bottom body

Moving Money Box : Pig [Assembly Instructions]
Glue Body
Glue Body
Put glue on the side and top parts, and attach them together.
Attach the bottom, side and top parts together.
Top body 2
Top body 1
Top body 3
Side body 2 Side body 1
Top body
Side body
Bottom body

Moving Money Box : Pig [Assembly Instructions]
Glue Body
Glue Ears &
Tail
Fold the front in half, and attach.
Attach the front parts to the body.
For the ears and tail, after gluing
the pieces together, cut them out
along the lines on the front.
Attach the tail.
After cutting out, fold and make sharp creases. Insert the ears into the holes on the side,
and then open up the "wings" inside.
Ears
Tail
Tail
Right ear
Left ear
Front body

Moving Money Box : Pig [Assembly Instructions]
Glue Device
Glue Face
First, assemble the device. Next, fold up the nose, and insert it
into the hole on the body's front.
Finally, with the nose outside the body
at the front, assemble the tip of the nose
and glue it together.
This part is the device to make the pig move,
so be sure the creases are sharp and neat.
Assemble the face, put the nose inside it,
and attach the face to the body.
Nose
Face
Fold up and attach the front face.

Moving Money Box : Pig [Assembly Instructions]
Glue Bonus
Parts
Adjust Device
Choose a decoration to put on his head.
Check that the ear device is opened up properly,
and is beneath the nose device.
Push the nose in
(or pull it out) so that
it sticks out just a little bit
from the hole in the face.