Canon CREATIVE PARK Reindeer User manual

A1 Head
Triangular glue tab
Scissors
Paste, or woodwork glue
Stencil pen, or bodkin
Ruler
Pencil
Scissors line
Mountain fold
Valley fold
Glue spot
Parts No.
Notation Key
Tools
Glue tab
Parts name
Scissors line
Parts No.
Reindeer : Assembly Instructions Page
<Caution>
Keep scissors and glue away from small children.
Be careful not to cut your fingers when using scissors.
marks a basic assembly technique that remains the same
regardless of the part.
Instructions are printed only for the first instance.
Assemble the head and antlers
Use pattern: Page2 to Page4.
Cut along the line marked .
Cut out A1 by cutting along the lines.
A1 Head
Make a mountain fold and valley fold on A1.
Trace along the mountain fold and valley fold line with a
stencil pen, scoring it to make it easier to fold.
The parts will be easier to assemble if curled.
Using the photo as a guide, move your fingers in the direction of the
arrow, adjusting the pressure to curl the paper.
Attach the triangular glue tabs so that the front side becomes convex.
Add a slight curl to A1 when attaching it.
Using the photo as a guide, attach in the direction of the arrow.
The Assembly instructions are divided into three blocks: A (head,
antler), B (front legs, body), and C (waist, hind legs, stand). Follow
the instructions for each block to assemble your reindeer.

Apply glue to the area marked by the blue line.
Apply glue to
the area marked
by the blue line.
Align the seams.
Align the seams.
Align the seams.
Hold in place with a pencil.
Fold the two halves
so they meet.
Align the seams.
Reindeer : Assembly Instructions Page
Attach A2 and A3, and attach them to A1.
Attach A4, A5 and A6, and attach them to A1.
Assemble A7 and A8, and attach them to the head.
Attach A9 and A10, and A11 and A12, and attach them to the head.
Assemble A13 to A18, attach them in order.
Assemble A19 to A22, attach them in order.
In the same way, assemble parts A26 through A31, A32 through
A35, and A36 through A38, and add curves as shown in the photo.
Next, attach the antlers to the head, and the head
and antlers are complete.
Assemble A23 to A25, attach them in order.
Next, attach the antlers to A13.
Apply glue to
the area marked
by the blue line.
Apply glue to the
area marked by
the blue line.
Apply glue to the area
marked by the blue line.
Apply glue to the area
marked by the blue line.
Apply glue to the area
marked by the blue line.

Assemble the waist, hind legs and stand
Use pattern: Page8 to Page10.
Assemble the front legs and body
Use pattern: Page5 to Page7.
Apply glue to the area marked by the blue line.
Hold in place
with a pencil.
Align the seams.
Align the seams.
Reindeer : Assembly Instructions Page
Attach B1, B2 and B3, and attach them to the head.
Attach C1 and C2, and attach them to the body.
Attach C3 to the body. Next, attach C4.
Attach B4 to B7, and attach them to the neck.
Apply glue to
the area marked
by the blue line.
Attach B8, B9 and B10, and attach them.
In the same way, attach B11, B12 and B13.
Attach B14 and B15, and attach them to the body,
and the body is complete.
Attach the front legs to the shoulders.

Put glue on the hooves.
Align the seams.
Put glue on the edges of the back of the parts.
Reindeer : Assembly Instructions Page
Put glue on the
edges of the
back of the parts.
Assemble C5 and C6, and attach them to the body.
Assemble C7 and C8, and C9, C10 and C11,
and attach them together.
Attach the hind legs to the body.
Hold in place with a pencil.
Align the seams.
Align the seams.
Assemble parts C12 through C16, and attach them together.
In the same way, assemble parts C17 through C21, C22
through C26, and C27 through C31, and attach them together.
Stand the reindeer up with its hooves on the ground and
glue the hooves to the legs, making sure it is balanced and
won't fall over. Next, glue it to the stand, and you're done!