Cardo Systems SCALA RIDER G4 User manual

Scala Rider G4:
1. On the G4, press and hold the Volume up button for 6 seconds until the red and blue lights start
flashing simultaneously.
2. Press the 'Bluetooth' button in the GPS menu and press the yellow button when asked to "Connect
to Bluetooth Headphone".
3. Wait for the 'Scala Rider G4' to appear in the menu and select it by using the up/down arrows on the
right of the screen and pressing the connect button in the bottom left corner.
4. When prompted to enter a pairing code enter for zeros (0000) and press the enter button to the
right of the keypad.
5. The GPS and Q2 are now paired. This pairing will be remembered and the two units will
automatically pair in future when in range of each other.
Scala Rider Q2 PRO:
1. On the Q2, press and hold the Volume up button for 6 seconds until the red and blue lights start
flashing simultaneously.
2. Press the 'Bluetooth' button in the GPS menu and press the yellow button when asked to "Connect
to Bluetooth Headphone".
3. Wait for the 'Scala Rider Q2' to appear in the menu and select it by using the up/down arrows on the
right of the screen and pressing the connect button in the bottom left corner.
4. When prompted to enter a pairing code enter for zeros (0000) and press the enter button to the
right of the key pad.
5. The GPS and G4 are now paired. This pairing will be remembered and the two units will
automatically pair in future when in range of each other.

Interphone F5:
1. With the F5 turned off press and hold the MFB button for 5 seconds and release when the red and
blue lights flash in an alternating fashion. Select desired language as prompted by the F5.
2. Press the 'Bluetooth' button in the GPS menu and press the yellow button when asked to "Connect
to Bluetooth Headphone".
3. Wait for the 'Interphone F5' to appear in the menu and select it by using the up/down arrows on the
right of the screen and pressing the connect button in the bottom left corner.
4. When prompted to enter a pairing code enter for zeros (0000) and press the enter button to the
right of the key pad.
5. The GPS and F5 are now paired. This pairing will be remembered and the two units will
automatically pair in future when in range of each other.