Cardo Systems allways User manual

CARDO SYSTEMS INC.
Headset Manual
Version 2.1
™

1. Introduction…………………………….........................................................
Features..............................................................................................................
Comfort/Style…………………………..................................................................
2. Safety………………………….............................................................................
3. Package Contents………………………........................................................
4. Before Using………………………………......................................................
4.1 Charging Batteries..................................................................................
5. Getting Started with the allways™Headset......................................................
5.1 Turn on/off....................................................................................................
5.2 Pairing...........................................................................................................
5.3 Linking Headset to Paired Phone..................................................................
5.4 Wearing the Headset....................................................................................
5.4.1 EAR-CLIP: Attaching the ear clip to the Headset...................................
Fitting the ear clip with the Headset to the ear.........................................
5.4.2 EYE-GLASS CLIP: Attaching the eyeglass clip to the Headset..................
Fitting the eyeglass clip to the Eye- or Sunglasses...............................
6. Handling Calls with the allways™Headset....................................................
6.1 Answering Calls......................................................................................
6.2 Placing Calls...............................................................................................
6.3 Ending Calls...............................................................................................
6.4 Voice Dialing...............................................................................................
6.6 Volume Control...........................................................................................
6.7 Mute/Set.....................................................................................................
6.8 Transfer audio from Headset to phone or from phone to Headset..........
7. Reading Indicators of the Headset.................................................................
7.1 Visual............................................................................................................
7.2 Audio..........................................................................................................
7.3 Explanatory Chart.........................................................................................
8. Using/Getting Started with the allways™ BT Adapter & Headset.................
9. Handling Calls with the allways™ BT Adapter & Headset.............................
9.1 Normal Mode...................................................................................
10. Reading Indicators with the allways™ BT Adapter & Headset........................
11. FAQ’s.........................................................................................................
12. Limited Warranty..........................................................................................
TABLE OF CONTENTS
4
4
5
6
7
9
10
10
11
11
12
12
12
13
14
14
14
15
15
15
16
16
16
16
17
18
18
18
18
19
21
22
24
25
27

13. Troubleshooting..........................................................................................
14. Technical Specifications..............................................................................
15. FCC Notice.................................................................................................
16. European CE Notice..........................................................................................
17. Industry Canada Notice............................................................................
18. CONTACT INFORMATION.............................................................................
19. SERVICE………………………………………….........................................
20. TRADEMARK …………..............…………...............................................
30
32
33
33
33
33
33
34

1. Introduction
Congratulations and thank you for
purchasing allways™, the latest
technology in mobile phone accessories
and the most complete state-of-the-art
technology in Bluetooth™wireless hands-
free cellular Headsets. You can now talk
hands-free on your Bluetooth‘ enabled
mobile phone, made possible by the short-
range wireless connection between your
cell phone or smart PDA and your allways‘
Headset. In case you prefer to use a
standard mobile phone which has no built-
in Bluetooth™technology, you can still
enjoy the Headset’s advantages by
connecting our BT Adapter to your mobile
phone˙ (enables non-Bluetooth™cell
phones to become interoperable with the
Bluetooth™technology of our allways™
Headset),
Whenever this manual refers to both
Headset and Adapter, the term
“product(s)” is used. Otherwise, the
manual refers specifically to each device.
You will become accustomed to operating
and wearing your allways™Headset by
reading this manual. For our customers
who have also purchased the BT Adapter,
this manual will also describe the necessary
operating instructions in section 8.
Features
The following is a list of the features
offered by your allways™hands free
cellular Headset:
• No wires needed to connect your
Headset to your mobile phone.
• Lightweight and comfortable to use and
wear. The allways‘ Headset weighs less
than 3/4 of an ounce (18 grams).
• Clear reception and good quality sound.
• Extended talk time of up to 6 hours and
up to 120 hours standby time.
• While using your Headset you may be
up to 30 feet or 10 meters apart from
Overview
allways™Headset Manual Guide
4 †Headset Manual

your phone.
• Adjustable Eye/Sun glass clip or flexible
ear loop allow you to wear your Headset
on the right or left side.
• Rechargeable high-capacity Li-Polymer
batteries.
• If you have purchased our universal BT
Adapter you will find that its 2.5mm
Headset jack works with most mobile
phones.
Additional Headset Features:
• Calls can be answered and terminated
from either the Headset or from your
mobile phone.
• Calls can be initiated from your mobile
phone; audio will be heard on the Headset.
• The Headset supports voice dialing with
phones equipped with this feature.
• The allways‘ Headset allows transfer of
audio from the Headset to the phone and
vice versa.
• 1-year Limited Warranty.
Overview
Headset Manual 5

Comfort and Style
Your allways™Headset has several unique
features, some of which are patent
protected and cannot be found in other
Bluetooth™Headsets, e.g. our proprietary
mechanism to attach the Headset either
to your Eye/Sun-glasses or loop it around
your ear.
In a matter of seconds you can replace
the eyeglass-clip with the ear-loop and
vice versa.
• Exchangeable designer panels.
You can change the appearance of your
Headset by replacing its color panels with
a design of your choice. The box contains
three alternative default panels (one of
which is already attached to the Headset).
Additional designer panels can be
purchased separately.
• Background noise cancellation and
Mute button
To add convenience and privacy when
handling calls, your allways™Headset is
equipped with a mute button. Quality
sound and background noise cancellation
are provided by advanced circuit design
and a high-quality unidirectional
microphone, embedded in a very short
boom. In addition, all audio passing
through the microphone is being filtered
to allow transfer only of signals in the
desired frequency band.
Overview
6 †Headset Manual

2. Important Safety Information
Please maintain basic safety precautions
when using your hands free cellular
Headset. This will reduce the risks of fire,
electric shock and injury to users. Among
others you should comply with the
following recommendations:
1. Carefully read and understand the
instructions in this manual.
2. Follow all instructions and warnings
labeled and marked in this manual.
3. Use a damp cloth to clean your Headset
or the BT Adapter. DO NOT use liquid or
aerosol cleaners.
4. Use caution when using your Headset
near water such as bathtubs, kitchen sinks
or swimming pools.
5. Do not expose you Headset or Adapter
to extreme temperature, moisture or high
voltage.
6. Your Headset and Adapter are rugged,
but can be damaged or broken if not
handled with care.
7. Do not spill liquids in or place heavy
objects on the allways™Headset or
Adapter.
8. Use your personal carry box to protect
your Headset.
9. Do not disassemble the product or any
of its components for any reason. Do not
open the product’s casing, as this will void
the warranty and may damage the
electronic circuits. If assistance is needed,
contact the store from which you have
purchased the product or contact us via
e-mail at:
[e-mail]
To reach us via phone, please call:
In the USA and Canada toll-free 1-800
488-0363 or 412 788-4533
In Europe: [phone]
For additional Service Centers near you,
please visit our website at
http://www.allwayscardo.com/
techsupport
Note: Prior to contacting us, make sure
you have a valid warranty card available.
9. Discontinue the use of your Headset
if:
a. Your Headset is damaged.
b. Liquid has been spilled on or into the
Headset.
c. Your Headset has been dropped and
the case has been damaged.
d. Your Headset exhibits a distinct change
in performance.
e. Your Headset does not operate normally
and adjusting the controls does not resolve
the issue.
10. Unplug your Bluetooth‘ Adapter unit
from your mobile phone if:
a. The Adapter unit is damaged.
b. Liquid has been spilled into the Adapter
or your mobile phone.
c. The Adapter is not operating normally
after following the instructions to pair it
with your mobile phone or the on/off,
volume controls or other functions do not
operate properly.
d. You have dropped and damaged the
Adapter’s casing
e. The Adapter exhibits a change in
Overview
Headset Manual 7

performance.
11. Unplug your Wall Charger from the
Headset or Adapter if:
a. Either the cord or the Audio Connector
have been damaged.
b. Liquid has been spilled into the charger,
Adapter, Headset or mobile phone.
c. The Wall Charger does not operate
normally after following the operating
instructions.
d. Your Wall Charger has been dropped
and the case has been damaged.
e. The Wall Charger exhibits a change in
performance.
Automobile Travel
Please be mindful that certain activities
such as automobile travel require your
complete attention and concentration.
Check the rules and regulations regarding
the use of wireless Headsets in the area
where you drive and obey the laws at all
times. Pull to the side of the road and
park before making or answering a call if
driving conditions require it. Do not initiate
calls, perform pairing, linking or similar
operations while driving.
Most electronic equipment is shielded
from RF signals. However, certain electronic
equipment may not be shielded against
the RF signals emanating from your
wireless equipment.
Pacemakers
The Health Industry Manufacturers
Association recommends that a minimum
separation of about 16 cm or 6.0 inches
to be maintained between a mobile phone
or a Headset and a pacemaker to avoid
potential interference with the pacemaker.
Be sure not to interfere with the
functionality of personal medical devices.
Hearing Aids
Some digital Headsets may interfere with
some hearing aids. In the event of such
interference, you should consult your
hearing aid manufacturer to discuss
alternatives.
Other Medical Devices
If you use any other personal medical
device, consult the manufacturer of your
device and/or your doctor to determine
if it is adequately shielded from inter-
ference from external RF energy. Your
physician may be able to assist you in
obtaining this information.
Overview
8 †Headset Manual

User Manual – allwaysTM Headset
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
ALERTE
Risque d'explosion si la batterie est remplacée par un model qui ne convient pas. Il faut traiter les
batteries usées selon les instructions
NOTE: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/ TV technician for help.

3. Package Contents
Your Headset is offered in two alternative
sets:
Set 1 for users who intend to connect the
Headset to a Bluetooth equipped phone
Set 2 for users with a non-Bluetooth
mobile phone who have also purchased
our universal BT Adapter. Components h)
and i) are included only in Set 2.
a. allways™Headset
b. Eye/Sun-glass clip
c. Ear loop
d Personal carrying case
e. Wall charging unit
f. 3 exchangeable designer panels
(including the one on the Headset)
g) Manual and Warranty Card;
h) Optional BT Adapter* (separately
purchased);
Overview
Headset Manual 9

i) 2 Velcro pads to attach the Adapter
to your mobile phone
* The Adapter’s 2.5 mm jack works with
most mobile phones, but if your mobile
phone uses a different socket, you will
have to purchase the suitable mechanical
Audio Connector. Such Audio Connectors
can either be ordered directly from Cardo
Systems, Inc. or from appropriate retail
stores.
4. Before Using
Read and familiarize yourself with all
instructions and components of your
allways™Headset prior to use and in
particular before driving. Safety first!!!
4.1 Charging Batteries
Make sure the equipment (Headset and/or
Adapter) is fully charged prior to initial
use. Allow 4 hours for a full charge before
using for the first time. Thereafter, it will
require approximately 2-3 hours to
complete a full charge.
Charge the Headset (and if applicable the
Adapter unit) using the included charger
by plugging into a standard 110/220V-
wall socket. You must fully charge your
equipment prior to initial use
(approximately 2.5 hours for a full charge).
The light indicator will remain red until
your allways™Headset or Adapter is fully
charged; when fully charged, the light
indicator will turn to steady blue. You may
also leave the unit connected after
completion as there is no risk of damage
to the battery as a result of overcharging.
Note: For customers who have purchased
the Headset and the BT Adapter, the wall
charger will have a bifurcated cord to
supply simultaneous charge for both
devices.
Overview
10 †Headset Manual
Holding Duct
Light Indicator
Set/Mute button
Volume Control
Front Panel/Control Button (CTRL)
Charging
Socket
(here shown
withclosed
lid)
Microphone
Pointed tip to
exchange color
panel
Speaker

5.Getting Started with the
allways™Headset
Turn On/Off
Press and hold the CONTROL button
(CTRL) for at least 3 seconds until the blue
light indicator flashes and an alert tone is
heard. Release the button. If you have not
completed pairing, and this is the first
time you have turned ON the Headset,
the blue light indicator will start flashing
rapidly (2 times per second), indicating
that the device is in pairing mode. Please
read the pairing mode instructions below
for more details.
If the Headset is already paired, the blue
light indicator will start flashing slowly
(one flash every 5 seconds), indicating
that the device is in standby mode. To
turn off, press and hold the CTRL button
for at least 3 seconds until the red light
indicator flashes and an alert tone is heard.
Quickly release the button.
Pairing
Pairing is a required process in which the
allways™Headset and your Bluetooth™
enabled mobile phone become acquainted
with each other for the first time. At the
end of this process both devices retain
information about each other, so that
every time you turn one of them on, it
will look for the other device and will be
able to operate automatically with it.
Pairing is required only the first time for
a specific allways™Headset and a specific
mobile phone. Please refer to the Pairing
section of your mobile phone’s manual
prior to initiating the process.
Perform Pairing
1. Turn on the Headset and mobile phone.
2. Press and hold the CTRL button of the
Headset for at least 8 seconds until the
blue light indicator light starts flashing
rapidly (3 flashes per second). Release the
button.
NOTE: While pressing the CTRL button,
the red light indicator will flash after 3
seconds. Do not release the button yet;
wait for the blue light indicator to flash.
• Activate the Bluetooth‘ function on your
phone and initiate the search mode for
other Bluetooth‘ devices or Headsets.
Your phone should now find the allways™
Headset and the name "All Ways" should
appear on your screen.
• When prompted, select the allways‘
Headset and enter 0000 as the PIN code
(4 zeros) on your phone’s keypad.
• If successful, your allways™Headset
should start blinking in blue every 5
seconds (slow blinking).
Congratulations! You have now
successfully completed your Bluetooth‘
pairing process and are able to use your
allways™Headset in conjunction with
your mobile phone.
Getting Started
Headset Manual 11

5.3 Linking the allways™ Headset to
a paired phone
Although you may have previously paired
your Headset to your phone, each time
you turn one of them off, you may need
to reestablish the link. Linking may also
be necessary when your Headset and
phone have lost the radio signal because
the distance between them is greater than
30 feet or 10 meters. After you have
turned on your Headset and mobile
phone, there are three methods to
reestablish the link:
• With some mobile phones you need to
re-establish the link to your Headset by
using your phone’s menu. Please refer to
your mobile phone manual for operating
instructions.
• Assuming your mobile phone enables
voice activation, press briefly the CTRL
button on your allways™Headset. This
will activate your voice dial function on
the phone, indicating that the link is
established.
• Do nothing. Once a call is received,
answer by pressing the CTRL button.
Note: Most available Bluetooth™ phones
still do not support this method.
5.4 Wearing the Headset
Using the ear-loop
FIG. a
Because every user has a differently shaped
ear, it is important to initially adjust the
ear loop's curvature to comfortably fit
your particular ergonomic preference. The
ear loop is flexible but retains a rigid and
stable posture after adjustment. Thus, you
may chose to adjust the loop as a close
fit around the ear, or you may prefer a
more loose application. You may even
need to adjust the ear-loop's exact
curvature several times until you find the
most comfortable shape, so that the
speaker hovers exactly above the ear
channel. Some users find it convenient to
straighten the loop entirely and bend it
around the ear every time they put on the
device.
curving ratchet
Getting Started
12 †Headset Manual

• Insert the ear loop ratchet into the
holding duct on the back of the Headset
(Fig a.)
• Determine the height of the loop by
adjusting the depth to which you insert
the ratchet into the holding duct (FIG. a).
with the objective to insert speaker into
the outer part of your ear channel.
(Fig b and c.)
.
• Hold the headset as shown in FIG.b and
push with your pointing finger against
the flexible curvature to create an opening
between ear-loop and speaker as shown
in FIG c. While continuing to push against
the curvature
• place the ear-loop around your ear as
shown in FIG d. and fasten it to achieve
a steady and comfortable grip.
• Insert the speaker into the ear, just as
deep as you feel comfortable with.
Alternatively, you may also choose to bend
open the loop and then strap it around
your ear until you accomplish a
comfortable fit as shown in FIG. e and f.
FIG. g
• You can wear the Headset on the left
of the right side of your head by inserting
the ratchet accordingly (FIG g).
Note: The location of the control buttons
changes relative to the side of the head you
have chosen to wear the Headset. If you use
your left ear, the volume and Mute/Set buttons
will be on the bottom part of the Headset.If
you use your right ear, the volume and Mute/Set
buttons will be on the upper part of the Headset.
5.4.1 The Eye/Sun-glass attachment
The Eye/Sun-glass attachment (the "Clip")
fits a wide range of arms. The optimal
location to attach the Clip on the arm of
your Eye/Sun-glasses is where it positions
Speaker
Headset Manual 13
Getting Started

the Headset’s speaker so it protrudes
exactly into your the ear-channel.
5.4.2 The Eye/Sun-glass attachment
The position of the Eye/Sun-glass
attachment, or "Clip" should be fixed
on the arm of the glasses, so it allows the
Headset’s speaker to protrude slightly into
the ear-channel (FIG d).
• Insert the Clip’s ratchet into the holding
duct on the back of the Headset (FIG a)
FIG a
• Determine the height of the Headset
relative to the glasses by adjusting the
depth to which you insert the ratchet into
the holding duct (FIG a).
• Once you have inserted the Clip into
the holding duct, attach the entire Headset
by sliding the Clip from front to back
along the arm of the Eye/Sun-glasses until
the speaker hovers above the inner cavity
of your ear (FIG c). Then insert the speaker
slightly into the ear-channel to achieve a
comfortable fit.
Placing the Headset on the left or on
the right side
You can wear the Headset on the left or
the right side of your head by inserting
the ratchet accordingly (FIG b)
1. Insert ratchet
into holding
duct
2. Push lever and snap open Clip
onto the arm
3. Slide open clip
alongside the arm
Getting Started
14 †Headset Manual
ratchet
Holding duct
FIG b
FIG d
FIG c

Exchanging the color panels
It is easy to replace the color panel. Just
insert your fingernail or a pencil into the
small tri-angular opening at the pointed
tip of panel and pull it out gently. Then
press the chosen panel firmly over
opening.
Protecting the headset while not in
use
Your allways Headset is sturdy and reliable.
To protect it from scratches and similar
impacts while tossed among other objects
in your briefcase or pocket, you may want
to use our fashionable personal carry case.
The case is designed to allow storing the
Headset with ear-loop or Eye/Sun-glass
clip attached.
6. Handling Calls with the
allways™Headset
6.1 Answering Calls
When your mobile phone is ringing you
will hear the ring tone either directly on
the Headset or from the phone. To answer
the call from the Headset, press briefly
the CTRL button.
Note: Wait several seconds after pressing
the CTRL button until you hear a sound
on the Headset. Pressing the CTRL button
again too soon might disconnect the call.
Alternatively you may answer the call by
using your mobile phone keys. Audio
connection between Headset and phone
will automatically be established. In some
mobile phone models the connection
might be slightly delayed.
6.2 Placing Calls
You can dial by using the mobile phone's
keys. If your mobile phone supports voice
activation, you may also place your call
accordingly as described in the Voice
Dialing section below. If you are initiating
a call by using the phone's keypad, your
call will most likely be automatically
transferred to the Headset.
NOTE: Some mobile phones need prior
configuration. Yet other phones may
require that you press the CTRL button
on the Headset after making the call, to
Getting Started
Headset Manual 15

transfer audio to the Headset. Besides trial
and error attempts, you may wish to visit
our website to find out how best to
configure your particular mobile phone.
6.3 Terminating Calls
To terminate a call, press briefly the CTRL
button. A sound will be heard, confirming
the disconnection. Wait at least three
seconds before you can press the CTRL
button again to place a new call.
Alternatively, you can terminate a call by
using the END key of your mobile phone.
Doing so, will automatically terminate the
audio connection between the Headset
and mobile phone. If the other party
terminates the call, no further action on
your part is required.
6.4 Voice Dialing
This feature is only available with mobile
phones equipped with voice activation
technology. To use voice activation you
must first assign voice tags to the desired
parties listed as your contacts in your
mobile phone (if you are not familiar with
this procedure, please refer to the manual
of your mobile phone).
While your phone is ON but no call is in
progress and the phone is not ringing,
press the CTRL button briefly and a short
beep will be heard. After the beep,
pronounce the name of the party you
wish to call and wait for feedback from
the phone. The type of feedback depends
on your phone (voice confirmation or no
confirmation).
6.5 Volume Control
You can adjust the volume on the
allways™Headset by pressing the left or
right volume buttons to increase/decrease
volume. Every press - followed by a short
beep - changes the audio level. When
volume is at the maximum/minimum,
beeps are not heard. Continuous pressing
on the volume button will continuously
increase/decrease the volume.
6.7 Mute Function
While a call is in progress, press briefly
the MUTE/SET button. You will hear a
tone indicating that you are in Mute mode,
during which you continue to hear the
other party, but your voice will not be
heard on the other end. Press the
MUTE/SET button again to cancel Mute
mode.
Getting Started
16 †Headset Manual
Volume
Control
Mute/Set
Button

Getting Started
Headset Manual 17
6.8 Transfer audio from Headset to
phone or from phone to Headset
The allways‘ Headset allows transfer of
calls from the Headset to the phone and
vice versa. While a call is in progress use
your phone’s key pad (refer to your mobile
phone manual) to transfer audio and voice
from the phone to the Headset).
Alternatively, some phones transfer calls
to the Headset by pressing once the CTRL
button on the Headset.

Low Battery
allways™ is in pairing mode
allways™ is paired to a mobile phone. Same
indication is shown even if the other device is
turned off.
allways™ is being charged and battery is not
yet fully charged.
allways™ is connected to charger and battery
is fully charged.
Every depression of the Control button will
generate a brief sound to be heard on the
Headset.Every increase/decrease on the volume
button is followed by a short beep. If volume can
not be further increased/ decreased, no beeps will
be heard.
Indicates that Headset is being turned on
Indicates that Headset is being turned off
Two beeps are sounded when activating
Mute/Set option, i.e. the other party will not
hear you until you cancel Mute/Set.
The mobile phone releases ringing tones which
are transferred to the Headset. Different ringing
tones will be heard subject to the model and
setting of the mobile phone.
While performing voice dialing, the phone
prompts you by means of a sound, indicating
that you ought to pronounce the name of party
you wish to call. Please refer to your mobile
phone manual for more information.
7. Understanding the Indicators of the allways™Headset
Visual Indicators
Light indicator blinks red and blue
(every 3-5 seconds)
Light indicator flashes rapidly in blue
Light indicator flashes slowly in blue
Light indicator shows steady red
Light indicator shows steady blue
Audio Signals from the Headset
Increasing tones
Decreasing tones
Two short beeps
Ringing tones
Other audio tones
VISUAL INDICTORS
18 †Headset Manual

This section is only applicable for
users who have purchased
theuniversal BT Adapter
8.Getting started with the
allways™BT Adapter and Headset
Turning On/Off
Press and hold the CONTROL (CTRL)
button for at least 3 seconds until the
blue light indicator flashes and an alert
tone is heard. Release the button. If you
have not completed pairing and this is
the first time you have turned ON the
device, the blue light indicator will start
flashing rapidly (3 times per second),
indicating that the device is in pairing
mode. Please read the pairing mode
section 5.2 for further details.
If the device is already paired, the blue
light indicator will start flashing slowly
(one flash every 5 seconds), indicating that
the device is in standby mode.
To turn off, press and hold the CTRL button
for at least 3 seconds until the red light
indicator flashes and an alert tone is heard.
Release the button.
Pairing the Adapter and Headset
Pairing is a required process in which the
allways™Headset and BT Adapter
become acquainted with each other for
the first time. At the end of this process
both devices retain information about
each other, so the next time you turn one
of them on, it will look for the other
device and will be able to operate
automatically with it. Pairing is required
only the first time for a specific allways™
Headset and BT Adapter.
Pairing Headset and BT Adapter
• Turn on the Headset and BT Adapter.
• Press and hold the CTRL button of the
Headset for at least 8 seconds until the
Blue light indicator starts flashing rapidly
(3 flashes per second). Release the button.
Note: As you press the CTRL button while
performing the above procedure you will
notice that the light indicator turns red
after 3 seconds. Do not release button
yet, and wait until the blue light indicator
flashes rapidly.
• Upon successful completion of the
procedure, your allways™Headset & BT
Adapter should start blinking in blue every
5 seconds (slow blinking). Now, as your
pairing process is complete, you are able
to use your allways™Headset in
conjunction with your BT Adapter.
Linking Headset to a Paired BT Adapter
If you have already paired your Headset
to a BT Adapter before and you have
subsequently lost radio link between the
units (due to distance in excess of 30 ft.
or 10m, or because either the Headset or
Headset Manual 19
Adapter