Carlson Pet Products 0470 User manual

OUTDOOR SUPER GATE
OWNER’S MANUAL MODEL: 0470, 0480
www.carlsonpetproducts.com
Carlson Pet Products, Inc.
3200 Corporate Center Drive, Suite 105 | Burnsville, MN 55306, USA
952.435.1084
Made in China
• READ ALL INSTRUCTIONS BEFORE ASSEMBLY AND USE OF GATE.
• KEEP INSTRUCTIONS FOR FUTURE USE.
!

ENGLISH 3
!
Before Using Product
Read and follow all instructions carefully to ensure that your gate and extensions are properly installed.
Improper installation could result in the gate becoming unstable or dislodged from the doorway.
Always make sure the extension is securely attached to the gate before using. Please keep these
instructions for your reference.
IMPORTANT
• The four mounting brackets must be used in securing the gate to the wall. These brackets
prevent the gate from dislodging from its opening and becoming unstable.
• If hardware mounting to a surface other than drywall or wood, please
consult with a professional about installation.
WARNING
• To prevent serious injury or death, securely install gate or enclosure
and use according to manufacturer’s instructions.
• Check the gate regularly to see if all the hardware and mountings are tightened.
• This is a Pet Gate. NOT intended for use with children.
• This is a pet gate, but when used with children the small pet door must remain
closed and securely latched.
• Strangulation hazard: pets can force themselves into very small openings; use this
gate with pets whose heads will not fit into openings in the gate, between the gate
and floor, or between the gate and wall.
• Never use with pet able to climb over or dislodge/open the gate or enclosure.
• Never leave pet unattended.
• Use only with the locking/latching mechanism securely engaged.
• To prevent falls, NEVER use at the top of stairs.
• This gate is designed to fit maximum width openings 144 inches.

ENGLISH4
PLEASE CHECK TO MAKE SURE YOU HAVE THE FOLLOWING PARTS:
A Super Gate Frame Assembly (6 Panels)
B Wall Mounting Bracket (4 – Attached to Gate Frame)
C Outdoor Ground Stakes (4)
Before Assembly
C
BA

ENGLISH 5
STEP 1
Unfold the super gate frame by turning the locking knobs counter clockwise at each pivoting
joint. Loosen the knobs enough to allow the individual panels to swing open freely without
fully removing the knobs.
Option A: Installing Your Gate Between Two Walls
LOCKING KNOB
STEP 3
Use a Phillips/cross-head screwdriver to fix the wall mounting bracket to the wall. Repeat for
all four brackets.
STEP 2
Configure your super gate into your desired shape. The gate should rest directly on the floor.

ENGLISH6
STEP 1
Unfold the super gate frame by turning the locking knobs counter clockwise at each pivoting
joint. Loosen the knobs enough to allow the gate to swing open freely without fully removing
the knobs.
Option B: Installing Your Gate as a Freestanding Enclosure
STEP 2
Configure your super gate into your desired shape. The gate should rest directly on the floor.

ENGLISH 7
STEP 4
Join the free ends of the gate together to form a closed structure. Insert one of the previously
removed metal pivot bars through the opening created by joining the upper metal joints.
Guide the metal pivot bar downward into the circular housing on the lower metal joint.
STEP 3
Unscrew and remove the (2) locking knobs at
each end of the gate. Then,remove the vertical
metal pivot bars (2), the mounting brackets (4)
and the associated toothed disks and metal
receiving cup.All components on each end of
the gate that can be removed without the use
of tools should now be removed.

ENGLISH8
STEP 5
Use one of the locking knobs you removed in STEP 3 to join the two panels together. Once you
are satisfied with the configuration of your pet yard, go back and tighten all of the locking knobs.
To position the pet yard into a new configuration or shape, loosen each of the locking knobs,
adjust and re-tighten.
NOTE: When adding or removing additional panel units to the configuration, panels must be
added or subtracted in sets of two for the freestanding enclosure to function properly.
NOTE: When using the super gate over grass, secure the bottom rail with ground stakes for
added stability.

ENGLISH 9
TO FOLD YOUR SUPER GATE
STEP 1: Loosen all of the locking knobs so the panels can move freely and
become exible at the joints.
STEP 2: Remove one of the locking knobs from the super gate and remove one vertical tube.
STEP 3: You will now be able to pull the two metal joints and the top and bottom
of the super gate apart.
STEP 4: Fold and put away.
CARE AND MAINTENANCE
Periodically check the gate for signs of damage, wear, or missing components. Do not use if
any part is missing, worn or damaged. Check the gate regularly to ensure all the hardware and
mountings are tightened. Do not use abrasive cleaners or bleach. Clean by sponging with warm
water and a mild detergent.
90 DAYS LIMITED WARRANTY
If, during the rst 90 days after consumer purchase of the item, under reasonable and non-
commercial use and conditions of maintenance, it fails while owned by the original purchaser
because of the quality of materials or workmanship of nish and assembly, Carlson Pet Products,
Inc. will replace or repair it at Carlson’s option. PROOF OF PURCHASE REQUIRED.

ENGLISH10
Replacement Parts
A Metal Receiving Cup
Black = #11130
B Wall Mount Bracket
Black = #11007
COutdoor Lower Toothed Disc
Black = #11133
D Outdoor Upper Toothed Disc
Black = #11134
E Outdoor Locking Knob
Black = #11135
F Metal Pivot Bar
35.5" = #11132
27.5" = #11131
G 1" Wall Mount Screws
#10001
E
A
B
F
D
C