Casall R600 II User manual

ROWER MACHINE R600 II
Owner’s Manual
N

2
Important: Please locate your serial number and record in the box below for service support
purposes.
Serial number here：

Hardware chart
Allen Key(1)
R600 II
M-3 Flat washer for 8* 19*2T (8)
M-1 CAP(2)
M-4 Allen Bolt M8xP1.25x20mm
M
- 2 S c r e w M 4 * 1 4 L ( 1 )
M-5 Allen Bolt M8xP1.25x25mm
M-6: Curved Washer
8* 9*2T (4)
M-7: lock nut for M8 (4)
(Pedal Wrench)
Screwdriver (1)

EXPLODED DIAGRAM
D-9
D-8
L
L-1
L-3 L-2
L-4 L-5 L-6 L-7
L-8 L-9 L-10
L-11
L-12
L-13
L-14
F
F-1
F-2
F-3
F-4
F-5
F-6
F-7
F-8
F-9
F-10
G
G-1
G-2
G-3
G-4
G-5
G-6 G-7 G-8 G-9
G-10
D-19
D-20
H
H-1
H-2
H-3
H-4
H-5
H-6
H-7
H-8
H-9
H-10
H-11
H-12
H-13
H-14
H-15
H-16
H-17
H-18
H-19
H-20
E
E-5
E-6
E-7
C-7
C-8
C-11
CC-6
C-1
C-2
C-4
C-3C-9 C-10
C-5
C-12
C-13
B-1
B-2
M-1
B-3
B-4
B-5
B-7
B-6
D
D-1 D-2
D-3
D-7 D-6 D-5 D-4
I-8 I-7 I-6 I-5 I-4 I-3 I-2 I-1
I-9
K
K-1 K-2 K-3
M-5
M-6
M-7
D-21 N
M-3
M-4
A
A-1
L-15
J
M-4
M-3
J-4
J-1
J-7
J-6

Parts List
No. Description Q'ty
A,A-1 Computer & screw 1 SET
B-1 Slippery rail 1 PCS
B-2 Screw M5x30L 4 PCS
B-3 Cap for wireless receive wire 1 PCS
B-4 Wireless receiver wire for pulse 1 PCS
B-5 Screw M4x8L 2 PCS
B-6 Screw M5x14L 2 PCS
B-7 Rear cover for slippery rail 1 PCS
C Bracket for roller 1 SET
C-1 Driving pulley 1 SET
C-2 Roller for bracket roller 1 SET
C-3 Screw 3/8"x54mm 1 PCS
C-4 Screw M6x50L 1 PCS
C-5 Nylon nut 3/8"x7t 1 PCS
C-6 Nylon nut M6 1 PCS
C-7 Spring washerφ8*φ14*2T 2 PCS
C-8 Flat washerφ8*φ19*2T 2 PCS
C-9 Bushingφ10xφ14x8mm 2 PCS
C-10 Bushingφ6xφ9x6mm 2 PCS
C-11 Hexagon screw M8xP1.25x16L 2 PCS
C-12 Flat washer φ10*φ18*1T 1 PCS
C-13 Flat washerφ6*φ12*1T 1 PCS
D Main frame 1 SET
D-1 Left end cap for main frame stabilizer (front) 1 PCS
D-2 Right end cap for main frame stabilizer (front) 1 PCS
D-3 End cap for main frame stabilizer (rear) 2 PCS
D-4 Screw M6xP1.0x57L 1 PCS
D-5 Fixing cap 2 PCS
D-6 Flat washerφ6xφ16x1t 1 PCS
D-7 Nylon nut M6 1 PCS
D-8 C-type ring φ8 2 PCS
D-9 Speedy nut M8 2 PCS
D-10 Transportation wheel 2 PCS
D-11 Sensor box 1 PCS
D-12 Screw M4x10L 1 PCS
D-13 Screw M5x16L 4 PCS

6
D-14 Sleeve for chain cover 1 PCS
D-15 Left chain cover 1 PCS
D-16 Right chain cover 1 PCS
D-17 Side cover for chain cover 2 PCS
D-18 Screw M4x50L 5 PCS
D-19 Computer cable wire (Upper) 1 PCS
D-20 Pulse wire for wireless receiver 1 PCS
D-21 DC wire 1 PCS
D-22 Front cover for slippery rail 1 PCS
D-23 Computer bracket holder 1 PCS
E Handlebar 1 SET
E-5 Foam grip for handlebar 2 PCS
E-6 Cap for handlebar 2 PCS
E-7 Inkle 1 PCS
F~F-5 Flywheel set 1 SET
F-6 Hexagon nut 3/8"-26x4.5t 2 PCS
F-7 Fixing pin 2 PCS
F-8 Fan 1 PCS
F-9 Screw M3x8L 4 PCS
F-10 Driving belt J6 762m/m 1 PCS
G~G-10 Idler wheel set 1 SET
H~H-20 Spring box set 1 SET
I-1 Rolling slider 1 PCS
I-2 Flat washerφ8*φ19*2T 4 PCS
I-3 Screw M8*P1.25*16L 4 PCS
I-4 Screw 3/8"-16x35L 4 PCS
I-5 Roller wheel 4 PCS
I-6 Bushingφ10xφ14x6mm 4 PCS
I-7 Flat washerφ10.5xφ17x2t 4 PCS
I-8 Nylon nut 3/8"x9t 4 PCS
I-9 Seat 1 PCS
J Pedal holder 1 SET
J-1 Pedal (R) 1 PCS
J-4 Screw M5xP0.8x10L 8 PCS
J-6 Pedal (L) 1 PCS
J-7 Fix band of pedal 2 PCS
K Rear stabilizer 1 SET

7
K-1 Adjustable cap for rear stabilizer 2 PCS
K-2 Screw 3/16”x11/8” 4 PCS
K-3 End cap for rear stabilizer 2 PCS
L~L-3 Magnetic set 1 SET
L-4~L-13,L-15 Gear box 1 SET
L-14 Small spring 1 PCS
M-1~M-7 Bolts & nuts pack 1 SET
N Adaptor 1 PCS

8
ASSEMBLY STEPS
Steps 1
1. Attach the rear stabilizer (K) to the slippery rail (B-1) and secure it with 4 allen bolt (M-5), 4
semi washers (M-6), and 4 nylon nuts (M-7). Make sure they are securely tightened.
Steps 2
1. Please remove the four M5x30L screws (B-2) on the slippery rail (B-1) in left side.
2. Pass the slippery rail (B-1) through the slide seat (I-9)
3. Use the four M5x35L screws (B-2) to fix the stopper (M-1) on the slippery rail (B-1) in left side.
B-1
K
M-5
M-6
M-7
M8xP1.25x25L 8* 9*2T M8
*4
*1
STEP1
STEP2
Box Spanner
STEP1
STEP2
M5x30L
*4
*2
*1
B-2
M-1
B-1
I-9

9
Steps 3
1. Slide the front cover (D-22) to the slippery rail (B-1), and then connect wireless receiver for
pulse wire (B-4) and pulse wire (D-20).
2. Insert the rail to the main frame (D) and fasten it with 4 flat washers (M-3) and 4 Allen bolt
(M-4).
3. Fix the front cover (D-22) with screw (M-2).
M-3
M-4
D-20
B-4
B-1
D
M4x14L *1
M8x16L
*4
8* 9*2T *1

10
Steps 4
1. Fit paddle holder (J) to the slippery rail (B-1) and secure it with 4 M8xP1.25x20L screws (M-4)
and 4 flat washers (M-3).
Remarks: Do not screw one set of the M8xP1.25x20L Screws and Flat washers too firm at one
time. It is better to fix the four sets firmly at the same time because it helps you to change angles
and to fix easily.
M-4
M-3
M8x16L
*4
8* 9*2T *1
B-1
J