Case Eos Bar Table Installation guide

Eos
Bar Table
Eos Bar Table – designed by Matthew Hilton
To prolong the life of the product and retain its appearance and functionality,
we would like to give you some relevant information and care advice:-
Made from aluminium, the Eos outdoor range is durable, light-weight,
rustproof and low maintance. Regular periodic care and cleaning is recommended over
occasional heavy duty maintenance
The table frame and slats are nished in a hardwearing powdercoat which can be cleaned
using a sponge / soft bristle brush with a cleaning solution of mild liquid soap and luke-
warm water. The use of abrasive cleaners should be avoided.
Rinse and dry thoroughly for best nish.
Caution: In seaside use, salt can accumulate on the nish which may lead to surface
damage
In indoor pool areas, chlorides can accumulate on the nish which may lead to surface
damage.
In both of these environments, repeated cycles of condensation followed by evaporation
will cause build-up of these aggressive corrosives. Regular cleaning with mild soap and
water will remove the concentrated deposits and protect the furniture nish per the above
instructions.
Although the materials and nished used are selected for their ‘all weather / year-round’
characteristcs, we recommend that the product is disassembled and stored during cold
and wet winter months.
If stored fully assembled the table should not be stored upside down.
We thank you for purchasing this product and wish you many years of enjoyable and
functional use.
For more related products please visit: casefurniture.com
Care Instructions
Case Furniture Ltd
London, SW18 2HZ
United Kingdom
[email protected]
casefurniture.com

1
Assembly Instructions
2
3
4
Provided
A x 4 B x 4 C x 1 D x 4 E x 4 F x 1
A
B
C
E
D
F