Case Dulwich User manual

Case Furniture Ltd
London, SW18 2HZ
United Kingdom
[email protected]
casefurniture.com
Dulwich
Round Extending Table
Care Instructions
Dulwich Round Extending Table – designed by Matthew Hilton
To prolong the life of the product and retain its appearance and functionality,
we would like to give you some relevant information and care advice:-
This unit is manufactured with either oak, black stained oak or walnut.
Craftsmen manufacture this product and there is variety between each unit. This is
because wood is a natural product, with natural colour and grain variations.
Natural timber is affected by sunlight; this can can the wood colour to darken.
For this reason (especially if placed in direct sunlight) it is recommended that placing
objects in the same position for long periods of time is avoided. This potential colour
adjustment becomes less relevent as the product ages.
Note that if the extension leaf is stored inside the table for long periods without
exposure to light, the natural richening of the wood will be limited. This will cause the
leaf to appear lighter than the rest of the table until it has been exposed to a similar
level of sunlight.
It is recommended that no abrasive cleaners or solvents are used to clean the unit.
Please only use proprietary furniture polishes or alternatively, warm water with
a diluted mild detergent.
We thank you for purchasing this product and wish you many years of enjoyable and
functional use.
For more related products please visit: casefurniture.com

1. Unpack all components and allow
ample room for assembly and turning.
2. Take dowels (D) and insert them into
the holes shown on the underframe.
3. Take one leg and push onto the dowels.
4. Fasten each leg to the underframe using
1 x bolt (B) and 1 x bolt (C) and allen key (A).
Repeat steps 2, 3 and 4 for all legs in turn.
FULLY TIGHTEN.
5. Turn the table onto its feet taking care
not to lever on the legs.
6. After turning the table onto its feet release
the transit bolts on both ends of the
table underside. (Fig.1)
NOTE: THE TABLE IS EXTREMELY HEAVY.
TAKE EXTRA CARE WHEN TURNING.
To extend the table and store the leaves,
unclip the clips on the underside of the
table and pull the table top apart.
Carefully unfold the buttery leaf.
Once in position re clip the top and leaves
together.
A x 1 B x 4
B
A
C
D x 8
D
C x 4
Fig. 1
Assembly Instructions