CEECO SSP-561-F User manual

SSP-561-F-SPK1.07UNVLr1-ADA-ISSUE4.0
SERVICE MANUAL
FOR
MODEL SSP-561-F
HANDSFREE STAINLESS STEEL TELEPHONE
WITH OPTIONAL ADA FEATURE
EQUIPPED WITH SPK1.07r1 FIRMWARE
Serving the Telephone Industry Since 1930
Communication Equipment 519 W South Park Street
& Engineering Company Okeechobee, FL 34972
Voice: 863-357-0798
Fax: [phone]

ISSUE 4.0
CEECO
Communication Equipment & Engineering Company
PROPRIETARY
2
IMPORTANT INFORMATION
FOR
CUSTOMER
Please fill in before you continue.
The following information is necessary when calling CEECO for assistance.
MODEL NUMBER MODEL SSP-561-F WITH OPTIONAL
ADA FEATURE, EQUIPPED WITH
SPK1.07UNVLr1 FIRMWARE
SERIAL NUMBER
DATE MANUFACTURED
LOCATION INSTALLED
For us to better serve you, please have this information available when calling for
technical support.
CEECO
Communication Equipment & Engineering Company
519 W South Park Street
Okeechobee, FL 34972
863-357-0798- telephone
863-357-0006- facsimile
[email protected]
www.ceeco.net

ISSUE 4.0
CEECO
Communication Equipment & Engineering Company
PROPRIETARY
3
TABLE OF CONTENTS
SECTION PAGE
1.0 INTRODUCTION............................................................................................................. 4
2.0 GENERAL.............................................................................................................................. 4
3.0 PROGRAMMING ............................................................................................................ 5
PROGRAMMING CONTINUED…................................................................... 6
PROGRAMMING CONTINUED…................................................................... 7
PROGRAMMING CONTINUED…................................................................... 8
PROGRAMMING CONTINUED…................................................................... 9
PROGRAMMING CONTINUED…................................................................. 10
4.0 OPERATION...................................................................................................................... 10
5.0 RECOMMENDED TOOLS AND TEST EQUIPMENT .................... 10
6.0 INSTALLATION NOTES AND ASSEMBLY INSTRUCTIONS 11
7.0 TESTING............................................................................................................................... 12
8.0 SPECIFICATIONS ........................................................................................................ 13
9.0 PARTS LIST: ..................................................................................................................... 13
10.0 REPAIR AND RETURN INFORMATION................................................. 14
11.0 WARRANTY POLICY .............................................................................................. 15
12.0 DIAGRAM .......................................................................................................................... 16

ISSUE 4.0
CEECO
Communication Equipment & Engineering Company
PROPRIETARY
4
1.0 INTRODUCTION
The practices in this manual provide installation and maintenance information for
the CEECO Model SSP-561-F Telephone.
The information in this manual is subject to change without notification.
For information not included in this manual, please call or write:
CEECO
Customer Service
519 W South Park Street
Okeechobee, FL 34972
863-357-0798- telephone
863-357-0006- facsimile
[email protected]
www.ceeco.net
2.0 GENERAL
2.1 The CEECO SSP-561-F is a sturdy, vandal resistant, hands free telephone,
constructed with a heavy-gauge, stainless steel panel. Instead of a
hookswitch and handset, the telephone has a Press to start/Press to stop
button for initiation and termination of phone calls. Manual volume
control is also provided inside the telephone.
2.2 The microphone is muted during periods of dial tone to deter the use of
hand held dialers to make fraudulent calls.
2.3 Incoming calls may be allowed or blocked depending on the
programming.
2.4 Programming is accomplished via the DTMF keypad.
2.5 The telephone is equipped with an optional ADA feature (color-changing
LED) that when activated provides a visual call progress indication.

ISSUE 4.0
CEECO
Communication Equipment & Engineering Company
PROPRIETARY
5
3.0 PROGRAMMING
NOTE: It is recommended that you ground yourself to prevent ESD
damage to the PCB(s).
3.1 Connect the telephone to a working telephone line or a DTMF test set.
3.2 Locate the pair of plastic mini-jumpers along the edge of the PC board.
Move them to the “on” or inner most position as depicted in the diagram
on the last page of this manual.
3.3 Press the “CALL & HANGUP” button and wait for dial tone before
entering programming digits.
3.4 Begin by entering #97#19#, which will clear all user programmable
memory.
NOTE: Once the # key has been entered, you may hear a fast busy tone,
an operator recording, or other Central Office signals. Please disregard
these sounds and continue programming, as they will have no effect on the
programming.
3.5 Each programming location is accessed by dialing the # sign and the
corresponding two digit code. The previous contents of the location are
automatically erased when the location code is accessed.
3.6 Enter #00, followed by a series of ten (10) digits as selected from the
following page. Location “00” is the telephone options location. By
entering a selected number of 0-9 into each of the ten digit locations, the
phone is customized for the particular installation.