Chauvet COLORado Zoom TOUR User manual

User Manual

Edition Notes
COLORado™ Zoom Tour User Manual Rev. 07
Edition Notes
The COLORado™ Zoom Tour User Manual Rev. 07 covers the description, safety
precautions, installation, programming, operation, and maintenance of the
COLORado™ Zoom Tour. CHAUVET® released this edition of the COLORado™
Zoom Tour User Manual in August 2011.
Trademarks
CHAUVET® is a registered trademark of CHAUVET & Sons Inc. (d/b/a CHAUVET®
or Chauvet). The CHAUVET® logo in its entirety including the Chauvet name and
the dotted triangle, and all other trademarks on this manual pertaining to services,
products, or marketing statements (example: It’s Green Thinking™) are owned or
licensed by CHAUVET®. Any other product names, logos, brands, company names,
and other trademarks featured or referred to within this document are the property of
their respective trademark holders.
Copyright Notice
CHAUVET® owns the content of this user manual in its entirety, including but not
limited to pictures, logos, trademarks, and resources.
© Copyright 2011 CHAUVET®. All rights reserved.
Electronically published by CHAUVET® in the United States of America.
Manual Usage
CHAUVET® authorizes its customers to download and print this manual for
professional information purposes only. CHAUVET® expressly prohibits the usage,
copy, storage, distribution, modification, or printing of this manual or its content for
any other purpose without its written consent.
Document Printing
For better results, print this document in color, on letter size paper (8.5 x 11 inches),
double sided. If using A4 paper (210 x 297 mm), configure your printer to scale the
content accordingly.
Intended Audience
Any person in charge of installing, operating, and/or maintaining this product should
read the guide that shipped with it as well as this manual in their entirety before
installing, operating, or maintaining this product.
Disclaimer
CHAUVET® believes that the information contained in this manual is accurate in all
respects. However, CHAUVET® assumes no responsibility for any error or
omissions in this document. CHAUVET® reserves the right to revise this document
and to make changes from time to time in the content hereof without obligation of
CHAUVET® to notify any person or company of such revision or changes. This does
not constitute in any way a commitment by CHAUVET® to make such changes.
CHAUVET® may issue a revision of this manual or a new edition of it to incorporate
such changes.
Document Revision
The COLORado™ Zoom Tour User Manual Rev. 07 supersedes all previous
versions of this manual. Please discard any older versions of this manual you may
have, whether in printed or electronic format, and replace them with this version.
Author Date Editor Date
D. Couppe 8/24/11 B. Pillow 8/29/11

Table of Contents
COLORado™ Zoom Tour User Manual Rev. 07 -i-
Table of Contents
1. Before You Begin ................................................................................................ 1
What Is Included .................................................................................................................1 
Unpacking Instructions........................................................................................................1 
Typographic Conventions...................................................................................................1 
Icon Meaning.......................................................................................................................1 
Product at a Glance ............................................................................................................1 
Safety Notes........................................................................................................................2 
Expected LED Lifespan ......................................................................................................2 
2. Introduction ......................................................................................................... 3
Product Description.............................................................................................................3 
Features..............................................................................................................................3 
Additional Features......................................................................................................................3
Product Overview................................................................................................................4 
Product Dimensions............................................................................................................5 
3. Setup .................................................................................................................... 6
AC Power............................................................................................................................6 
AC Plug .......................................................................................................................................6
Power Linking..............................................................................................................................6
DMX Linking........................................................................................................................7 
DMX Modes.................................................................................................................................7
Master/Slave Connectivity...........................................................................................................7
Mounting .............................................................................................................................8 
Orientation...................................................................................................................................8
Rigging........................................................................................................................................8
4. Operation ............................................................................................................. 9
Control Panel Description...................................................................................................9 
Control Options...................................................................................................................9 
Programming.......................................................................................................................9 
DMX Personality..........................................................................................................................9
DMX Control..............................................................................................................................10
Static Color................................................................................................................................10
Auto Programs...........................................................................................................................10
Edit Customs.............................................................................................................................10
Master/Slave..............................................................................................................................11
Color Settings............................................................................................................................11
Dimmer Curves..........................................................................................................................11
Control Panel Lock....................................................................................................................12
Program Upload ........................................................................................................................12
Reset.........................................................................................................................................13
Whites Setting ...........................................................................................................................13
White Calibration.......................................................................................................................13
TOUR Notes......................................................................................................................14 
Master Dimmer..........................................................................................................................14
Red, Green, Blue and White Color Selection............................................................................14
Color Macros.............................................................................................................................14
Strobe........................................................................................................................................14
Auto/Custom/Fan.......................................................................................................................14
Dimmer Speed...........................................................................................................................14
Zoom Selection..........................................................................................................................14
Zoom Reset...............................................................................................................................14
Menu Map.........................................................................................................................15 

Table of Contents
-ii- COLORado™ Zoom Tour User Manual Rev. 07
DMX Values......................................................................................................................16 
Tour...........................................................................................................................................16
Tour (Cont.)...............................................................................................................................17
ARC1.........................................................................................................................................17
ARC1 + D..................................................................................................................................17
ARC2.........................................................................................................................................17
ARC2 + D..................................................................................................................................17
ARC2 + S ..................................................................................................................................18
HSV...........................................................................................................................................18
5. Technical Information....................................................................................... 19
Product Maintenance........................................................................................................19 
Troubleshooting Guide......................................................................................................20 
Returns Procedure............................................................................................................21 
Claims...............................................................................................................................21 
Contact Us ........................................................................................................................21 
Technical Specifications ...................................................................................................22 

Before You Begin
COLORado™ Zoom Tour User Manual Rev. 07 -1-
1. Before You Begin
What Is
Included
One COLORado™ Zoom Tour
One Gel Frame
One NEUTRIK® powerCON® to Edison Plug Input Power Cord
5° Color Blending Filter
One Safety Cable
One Warranty Card
One Quick Reference Guide
Unpacking
Instructions
Immediately upon receiving this product, carefully unpack it and check the container in
which you received it. Make sure that you have received all the parts indicated above and
that they are all in good condition. If the material inside the container (this product and any
other accessory included with it) appears damaged from shipping, or if the container shows
signs of mishandling, notify the shipper immediately. In addition, retain the container and all
the packing material for inspection.
See the Claims section in the Technical Information chapter for more information.
Typographic
Conventions
Convention Meaning
1~512 A range of values in the text
50/60 A set of mutually exclusive values in the text
COLORado™ 1 The name of another publication, manual, or section
<SET> A button on the product’s control panel
Settings A product function or a menu option
MENU > Settings A sequence of menu options
1~10 A range of menu values from which to choose in a menu
Yes/No A set of two mutually exclusive menu options in a menu
ON A unique value to be entered or selected in a menu
Icon Meaning
Icon Meaning
This icon indicates critical installation, configuration, or operation
information. Failure to comply with this information may render the
product partially or completely inoperative, damage third-party
equipment, or cause harm to the user.
This icon indicates important installation or configuration
information. Failure to comply with this information may prevent
the product from functioning correctly.
This icon indicates useful, although non-critical information.
The term “DMX” used throughout this document refers to the USITT DMX512-A
transmission protocol.
Product at a
Glance
Use on Dimmer

Auto Programs

Outdoor Use

Auto-ranging Power Supply

Sound Activated

Replaceable Fuse

DMX

User Serviceable

Master/Slave

Duty Cycle


Before You Begin
-2- COLORado™ Zoom Tour User Manual Rev. 07
Safety Notes
It is important to read all these notes before starting to work with this product. The Safety
Notes include important safety information about the installation, usage, and maintenance
of this product.
There are no user serviceable parts inside this product. Any reference to servicing
you may find from now on in this User Manual will only apply to properly
CHAUVET® certified technicians. Do not open the housing or attempt any repairs
unless you are certified to do so.
Please refer to all applicable local codes and regulations for the proper installation
of this product.
PersonalSafety
Avoid direct eye exposure to the light source while the product is on.
Always disconnect this product from its power source before servicing.
Always connect this product to a grounded circuit to avoid the risk of electrocution.
Do not touch this product’s housing when operating because it may be very hot.
MountingandRigging
This product is for indoor use only! To prevent risk of fire or shock, do not expose this
product to rain or moisture.
Make sure there are no flammable materials close to this product while operating.
When hanging this product, always secure it to a fastening device using a safety cable
(included).
PowerandWiring
Always make sure that you are connecting this product to the proper voltage, as per
the specifications in this manual or on the product’s sticker.
Never connect this product to a dimmer pack or rheostat.
Never disconnect this product by pulling or tugging on the power cable.
Operation
Do not operate this product if you see damage on the housing, lenses, or cables. In
any of these cases, have the damaged parts replaced by an authorized technician at
once.
Do not cover the ventilation slots when this product is operating to avoid internal
overheating.
The maximum ambient temperature (Ta) is 104° F (40° C). Do not operate this product
at a higher temperature.
In case of a serious operating problem, stop using this product immediately!
In the unlikely event that your CHAUVET® product may require service, please
contact CHAUVET® Technical Support.
Expected LED
Lifespan
LEDs gradually decline in brightness over time, mostly because of heat. Packaged in
clusters, LEDs exhibit higher operating temperatures than in ideal, single LED conditions.
For this reason, using clustered LEDs at their fullest intensity significantly reduces the
LEDs’ lifespan. Under normal conditions, this lifespan can be of 40,000 to 50,000 hours. If
extending this lifespan is vital, lower the operational temperature by improving the
product’s ventilation and reducing the external temperature. In addition, limiting the overall
projection intensity may also help to extend the LEDs’ lifespan.

Introduction
COLORado™ Zoom Tour User Manual Rev. 07 -3-
2. Introduction
Product
Description
The COLORado™ Zoom Tour is a RGBW LED wash light. This product consists of a
single module that houses the internal power supply, the control panel, the LED drivers,
the LED boards, and motorized moving lenses, as well as the power and signal
connectors. The COLORado™ Zoom Tour features a variable zoom, which enables the
user to change the beam angle of the unit via DMX or control panel, and one mounting
bracket that doubles as a floor mount and hanging support bracket.
Features
3, 4, 5, 6, or 12-channel DMX control
Operating modes:
3-channel: RGB
3-channel: HSV
4-channel: RGB, dimmer
4-channel: RGBW
5-channel: RGBW, dimmer
6-channel: RGBW, dimmer, strobe
12-channel: RGBW, dimmer, color macro, strobe, auto/custom programs, auto speed,
dimmer speed, zoom, zoom reset
Motorized Zoom RGBW static color mixing with or without DMX control
Color temperature presets (3,200~10,000 K)
Built-in automated programs
Custom programs
Recall auto or custom programs via control panel, DMX, or master/slave
Color Calibration
Additional
Features
Five distinct dimming curves
Additional power output: max 11 units @ 120 V, 22 units @ 208 V, 25 units @ 230 V
NEUTRIK® PowerCon® power input and output connector
3 pin and 5 pin DMX input and output connectors
LCD display with password protection

Introduction
-4- COLORado™ Zoom Tour User Manual Rev. 07
Product Overview
Power in /
power out
Bottom View
Front View
Double-bracket yoke
Dmx in /
DMX
ou
t

Introduction
COLORado™ Zoom Tour User Manual Rev. 07 -5-
Product Dimensions

Setup
-6- COLORado™ Zoom Tour User Manual Rev. 07
3. Setup
AC Power
The COLORado™ Zoom Tour has an auto-ranging power supply that can work with an
input voltage range of 100~240 VAC, 50/60 Hz.
Make sure that you are connecting this product to the proper voltage, as per the
specifications in this manual or on the product’s sticker.
Always connect this product to a protected circuit with an appropriate electrical
ground to avoid the risk of electrocution or fire.
To determine the power requirements for the COLORado™ Zoom Tour, refer to the label
affixed to the side of the product. Alternatively, you may refer to the Technical
Specifications chart in the Technical Information chapter of this manual.
The listed current rating indicates the maximum current draw during normal operation. For
more information, you may download the Sizing the Circuit Breakers document from the
CHAUVET® web site: www.chauvetpro.com
Never connect this product to a rheostat (variable resistor) or dimmer circuit, even if
the rheostat or dimmer channel serves only as a 0 to 100% switch.
AC Plug
The COLORado™ Zoom Tour comes with a power input cord terminated with a Neutrik®
powerCON® A connector on one end and an Edison plug on the other end (US market). If
the power input cord that came with your product has no plug or you need to change the
Edison plug, use the table below to wire the new plug.
Connection Wire (US) Wire (Europe) Screw Color
AC Live Black Brown Yellow or Brass
AC Neutral White Blue Silver
AC Ground Green/Yellow Green/Yellow Green
Power Linking
The COLORado™ Zoom Tour supports power linking for up to 11 other COLORado™
Zoom Tour units at 120 VAC. This product comes with a power input cord, but no power
linking cord. However, a power linking cable is available as an option.

Setup
COLORado™ Zoom Tour User Manual Rev. 07 -7-
DMX Linking
You may link the COLORado™ Zoom Tour to a DMX controller using a standard DMX
serial connection. If using other DMX compatible units with this product, you can control
them individually with a single DMX controller.
If you are not familiar with the DMX standard, or if you need information about the DMX
cables needed to link this product to a DMX controller, download the DMX Primer
document from the CHAUVET® web site: www.chauvetpro.com.
DMX Modes
The COLORado™ Zoom Tour uses the standard DMX data connection for its TOUR,
ARC1, AR1D, ARC2, AR2D, AR2S, and HSV DMX modes. You will find information about
these DMX mode(s) in the Introduction chapter (brief description), the Operation chapter
(configuration details), and the DMX Values section (individual channel values).
Master/Slave
Connectivity
The Master/Slave mode allows a COLORado™ Zoom Tour (the “master unit”) to control
one or more COLORado™ Zoom Tours (the “slave units”) without a DMX controller. A
COLORado™ Zoom Tour becomes the master unit when running an Auto or Custom
program, or by being in STATIC mode. You must configure the slave units to operate in
“SLAVE” mode from their respective control panels. During the Master/Slave operation, the
slave units will operate in unison with the master unit.
DO NOT connect a DMX controller to the unit’s operating in Master/Slave mode.
Otherwise, the signals from the DMX controller may interfere with the signals from
the master unit.
The Operation chapter of this manual provides detailed instructions on how to
configure the Master and Slave units.

Setup
-8- COLORado™ Zoom Tour User Manual Rev. 07
Mounting
Before mounting this product, read and follow the safety recommendations indicated in the
Safety Notes section (page 2 of this manual).
Orientation
Always mount this product in a safe position making sure there is adequate room around it
for ventilation, configuration, and maintenance.
Rigging
The COLORado™ Zoom Tour consists of the double-bracketed yoke and the body of the
fixture. CHAUVET® recommends following the general guidelines below when mounting
this product.
When selecting an installation location, consider ease of access to this product for
operation, programming adjustments, and routine maintenance.
Make sure to mount this product away from any flammable material as indicated in the
Safety Notes section.
Never mount the product in places where rain, high humidity, extreme temperature
changes, or restricted ventilation may affect it.
If hanging this product, make sure that the location where you are mounting it can
support its weight. Please refer to the Technical Specifications section of this manual
for the weight requirement of this product.
Procedure
The COLORado™ Zoom Tour comes with a double-bracketed yoke to which you can
attach mounting clamps or the yolk can serve as floor stand. You must supply your own
mounting clamps. Make sure the clamps are capable of supporting the weight of this
product. You will have to use at least one mounting point per unit.
ProductMounting
Diagram
Floor MountingOverhead Mounting
Safety
Cable
Clamp
Double-
bracketed
yoke

Operation
COLORado™ Zoom Tour User Manual Rev. 07 -9-
4. Operation
Control Panel
Description
Button Function
<MENU> Exits from the current menu or function
<ENTER> Enables the currently displayed menu or
sets the currently selected value into the
current function
<UP> Navigates upward through the menu list and
increases the numeric value when in a
function
<DOWN> Navigates downward through the menu list
and decreases the numeric value when in a
function
Control Options
You can set the COLORado™ Zoom Tour start address in the 001~512 DMX range. This
allows for the control of up to 42 units in the 12-channel TOUR personality.
Programming
Refer to the Menu Map on page 15 to learn how the menu options relate to each other.
The Menu Map has a Main Level and a variable number of programming levels for each
option.
To go to an option in the Main Level, press <MENU> repeatedly until the option appears on
the display. Press <ENTER> to select. You will go to the first programming level for that
option.
To select an option or value within the current programming level, press <UP> or <DOWN>
until shown on the display. Press <ENTER> to select. If there is another programming
level, you will see the level’s first option. If not, you will see the selected value.
To exit to the previous menu level, press <MENU>.
DMX Personality
This setting allows the user to choose a particular DMX personality.
1. Go to PERS.
2. Select the desired personality (TOUR, ARC1, AR1D, ARC2, AR2D, AR2S, or
HSV).
See the DMX Values section for the highest starting address you can select for
each personality.
Make sure that the starting addresses on the various units do not overlap due to
the new personality setting. See the DMX Values section.

Operation
-10- COLORado™ Zoom Tour User Manual Rev. 07
DMX Control
In this mode, each unit will respond to a unique starting address from the DMX controller.
All units with the same starting address will respond in unison.
1. Select a DMX personality as shown in DMX Personality.
2. Set the running mode:
a. Go to RUN.
b. Select DMX.
3. Set the starting address:
a. Go to DMX.
b. Select the starting address (001~512).
The highest recommended starting address for each DMX mode is as follows:
DMX Mode DMX Address DMX Mode DMX Address DMX Mode DMX Address
TOUR 501
A
RC2 509 HSV 510
ARC1 510
A
R2D 508
AR1D 509
A
R2S 507
Static Color
The Static Color mode allows for permanent RGBW color mixing without a DMX controller.
1. Go to STAT.
2. Select the desired color (R., G., B., W., or Z.).
3. Select the desired color and zoom value (0~255).
4. Select (S.)
5. Select the desired frequency (0~20).
Auto Programs
Auto programs allow for dynamic RGBW color mixing without a DMX controller.
1. Go to AUTO.
2. Select the desired auto (AT. 01~10)or custom program (PR. 01~10).
You cannot edit any of the auto programs (AT. 01~10). However, you can edit the
custom programs (PR. 01~10). See Edit Customs for details.
Edit Customs
This setting allows the programming of up to 30 scenes for each of the 10 customizable
programs, including colors and effects.
1. Go to EDIT.
2. Select the desired custom program (PR. 01~10).
3. Select the desired scene (SC. 01~30).
4. Select the desired color or effect (R, G, B, W, Z, S, T, or F).
5. Select the color or effect value (000~255 for colors, zoom, and timers, or 00~20 for
strobe).
6. Repeat for the other colors or effects.
7. Return to the scene level (step 3).
8. Repeat the settings of colors and effects for the other scenes.

Operation
COLORado™ Zoom Tour User Manual Rev. 07 -11-
Master/Slave
The Master/Slave mode allows a group of COLORado™ Zoom Tours (the slave units) to
simultaneously duplicate the output of another COLORado™ Zoom Tour (the master unit)
without a DMX controller.
1. Set each of the slave units:
a. Go to RUN.
b. Select SLAV.
2. Set the master unit:
a. Set the running mode to DMX as explained in DMX Control.
b. Select an auto or custom program as explained in Auto Programs, or a
static mix of colors.
The master unit is the one that runs a program, whether Auto, Custom, or Static
mode.
Do not connect a DMX controller to the units configured for Master/Slave
operation.
The master unit should be the first in the DMX string.
Color Settings
The COLOR setting determines how the COLORado™ Zoom Tour generates the white
color based on various RGB settings.
1. Go to SET.
2. Select COLO.
3. Select OFF, RGBW, or UC.
OFF: When the RGB faders are all set to 255, the output is maximum, although
the resulting white color may not be balanced.
RGBW: When the RGB faders are all set to 255, the resulting output is defined by
the configured white color (see White s Settings).
UC: When the RGB faders are all set to 255, the output matches that of less
efficient products (Universal Color).
Dimmer Curves
This setting determines how fast the output of the COLORado™ Zoom Tour changes when
the operator modifies the values of the Red, Green, Blue, White, and Dimmer faders. This
setting gives the user four different options to simulate the dimming curve of an
incandescent lighting product.
1. Go to SET.
2. Select DIM.
3. Select a dimmer curve (OFF, DIM1, DIM2, DIM3, or DIM4).
OFF: The output is proportional (linear) to the Dimmer and RGBW channel
values.
DIM1~4: The output follows the Dimmer and RGBW channel values based on the
corresponding dimmer curve. DIM1 is the fastest and DIM4 is the slowest.

Operation
-12- COLORado™ Zoom Tour User Manual Rev. 07
Control Panel
Lock
This setting allows the user to activate or disable the control panel lock, which keeps non-
authorized personnel from changing the product’s settings.
1. Go to KEY.
2. Select ON or OFF.
When the control panel lock is active, the product will prompt the user to enter the
password after 30 seconds of control panel inactivity or after turning on the product.
After being prompted to enter the password:
Press <UP>, <DOWN>, <UP>, <DOWN>, and <ENTER>.
Program Upload
This option allows the user to copy the custom programs of one COLORado™ Zoom Tour
unit onto other COLORado™ Zoom Tour units by using the Master/Slave method.
1. Configure and connect the units in a Master/Slave arrangement, where the
master unit has the custom programs you want to transfer to the slave units.
2. At the master unit, go to SET.
3. Select UPLD.
4. When PASS shows, press <ENTER>.
5. Enter the master access password as shown in Control Panel Lock.
6. When SEND shows, press <ENTER> to start the upload.
7. Wait for the upload process to finish (the display will show END/MAIN) before
continuing or turning the units off.
The master and slave units will light up to provide the status of the process, as
follows:
Yellow indicates that the upload process is running.
Green indicates that the upload process completed successfully.
Red indicates that the upload process failed due to an error. Recheck all cable
connections and restart the process. If the issue persists, contact Chauvet
Technical Support.
DO NOT upload the program from a COLORado™ Zoom Tour to a different product.
You could render the other unit inoperative.

Operation
COLORado™ Zoom Tour User Manual Rev. 07 -13-
Reset
This setting allows the user to reset the COLORado™ Zoom Tour to its default values,
including the custom programs.
1. Go to SET.
2. Select REST.
3. When PASS shows, press <ENTER>.
4. Enter the master access password as shown in Control Panel Lock.
5. Wait for the reset process to finish.
DefaultValues
Parameter Default Value Parameter Default Value
STAT R/G/B.000 COLO UC
AUTO AT.01 EDIT PR.01/SC.01
ADDR D.001 CAL1 WH.01
RUN DMX CAL2 R/G/B.255
PERS TOUR KEY OFF
DIM DIM4
Whites Setting
This setting allows the user to select and edit the temperature of the white colors used in
channel 6 (Macros) when in the TOUR mode. It also allows the user to define the
maximum RGB values when RGB to White (RGB.W) is active.
1. Go to CAL1.
2. Select a white color (WH. 1~11).
3. Select a color (R., G., B., or W.).
4. Select a color value (0~255).
5. Repeat for the other colors.
White Calibration
This setting allows the user to select the white color shown by the COLORado™ Zoom
Tour when the color setting is RGBW and the DMX controller’s Red, Green, and Blue
faders are set to 255.
1. Go to CAL2.
2. Select a color (R., G., or B.).
3. Select a color value (0~255).
4. Repeat for the other colors
When selecting CAL2 > RGBW you will only be able to define the values of R. (red),
G. (green), and B. (blue).
The values of R. (red), G. (green), and B. (blue) configured from CAL2 > RGBW will
define the color temperature shown when the RGB faders are set to 255 if SET >
COLO > RGBW is active.

Operation
-14- COLORado™ Zoom Tour User Manual Rev. 07
TOUR Notes
These notes intend to clarify the way the TOUR DMX personality works.
Master Dimmer
Channel 1 controls the intensity of the currently projected color.
When the slider is at the highest position (100%), the intensity of the output is at its
maximum.
Red, Green, Blue
and White Color
Selection
Channels 2 through 5 control the intensity ratio of each of the Red, Green, Blue, and
White LEDs.
When the slider is at the highest position (100%), the intensity of each color is at its
maximum if SET > COLO is OFF.
You can combine channels 2 through 5 to create over one trillion colors.
Color Macros
Channel 6 selects the required Color Macro.
Channel 6 has priority over channels 2 through 5.
Channel 1 controls the intensity of the Color Macro.
Strobe
Channel 7 controls the strobe frequency (not the intensity) of channels 2 through 6.
Channel 7 can strobe channels 2 through 7 when not running macros, allowing the
individual faders (RGB and W) as well as channel 1 (D) to control the output intensity.
Channel 7 can strobe channel 6 when running macros, allowing channel 6 to select the
macro and channel 1 to control the output intensity.
Auto/Custom/Fan
Channel 8 selects the preset auto programs AT. 01~10 or the custom programs PR.
01~10.
When activating the custom Auto programs PR. 01~10, it is possible to control the Step
Time and Fade Time using channels 2 and 3 respectively.
Channel 9 has priority over channels 2 through 7.
Channel 9 controls the speed at which each auto programs plays.
Dimmer Speed
Channel 10 selects the dimmer mode and speed. When DIMMER is set to OFF, the
changes in the RGBW and Master Dimmer faders are linear. Otherwise, DIM1 is the
fastest dimmer curve, while DIM4 is the slowest.
Zoom Selection
Channel 11 controls the zoom function.
Zoom Reset
Channel 12 resets the zoom function to the starting position.

Operation
COLORado™ Zoom Tour User Manual Rev. 07 -15-
Menu Map
Main Level Programming Levels Description
STATIC
R.
000~255 Combines Red, Green, Blue, and White to
generate a custom color (0~100%)
G.
B.
W.
Z. Changes the beam angle
S. 0~20
Strobe frequency (0~20 Hz)
AUTO AT. 1~10 Choose from 10 automatic programs
PR. Choose from 10 customizable programs
DMX 001~512 Sets the DMX starting address
RUN DMX Receives signals from DMX controller
SLAV Receives signals from Master unit
PERS
TOUR 12-channel: RGBWA, D, A/C, AS, DS,
Macro, S, Z, ZR
ARC1 3 channel: RGB
AR1.D 4-channel: RGB, D
ARC.2 4-channel: RGBW
AR2.D 5-channel: RGBW, D
AR2.S 6-channel: RGBW, D, S
HSV 3 channel: HSV
SET
UPLOAD Enter password Transfers custom programs
REST Enter password Defaults fixture
DIM OFF No dimmer
DIM1~4 Dimmer curve
DERR BLAK All LED’s turn off when DMX signal is lost
SAVE All LED’s stay on the last command used
when the DMX signal is lost.
COLR OFF RGB set to “255”= max. output RGBW RGB set to “255” = balanced white
UC Universal color balance
EDIT PR.
(01~10) SC. (01~30)
R.
000~255 Combines Red, Green, Blue, White, and
Zoom, as well as strobe and timers to create
the scenes of a custom program
G.
B.
W.
Z.
S. 0~20
T. 000~255
F.
CALIB1 WH 1~11
R.
000~255 Modifies the color macros used in channel 6
of the TOUR personality
G.
B.
W.
CALIB2 RGBW
R. 000~255 Defines the color temperature used when
COLOR is set to RGB to W.
G.
B.
KEY ON/OFF Turns the password on or off

Operation
-16- COLORado™ Zoom Tour User Manual Rev. 07
DMX Values
Tour
Channel Function
Value Percent/Setting
1 Dimme
r
000 255 0~100%
2 Red 000 255 0~100%
Step Time When CUS. 01-10 in CH. 8 is activated
3 Green 000 255 0~100%
Step Time When CUS. 01-10 in CH. 8 is activated
4 Blue 000 255 0~100%
5 White 000 255 0~100%
6 Color Macro + White Balance
000 010
011 030
031 050
051 070
071 090
091 110
111 130
131 150
151 170
171 200
201 205
206 210
211 215
216 220
221 225
226 230
231 235
236 240
241 245
246 250
250 255
No Function
R: 100% G: Up B: 0%
R: Down G: 100% B: 0%
R: 0% G: 100% B: Up
R: 0% G: Down B: 100%
R: Up G: 0% B: 100%
R: 100% G: 0% B: Down
R: 100% G: Up B: Up
R: Down G: Down B: 100%
R: Down G: Down B: 100% W: 100%
White 1: 3,200 K
White 2: 3,400 K
White 3: 4,200 K
White 4: 4,900 K
White 5: 5,600 K
White 6: 5,900 K
White 7: 6,500 K
White 8: 7,200 K
White 9: 8,000 K
White 10: 8,500 K
White 10: 10,000 K
7 Strobe 000 010
011 255 No Function 0~20 Hz
8 Auto + Custom
Programs
000 020
021 030
031 040
041 050
051 060
061 070
071 080
081 090
091 100
101 110
111 120
121 130
131 140
141 150
151 160
161 170
171 180
181 190
No function
Auto 1
Auto 2
Auto 3
Auto 4
Auto 5
Auto 6
Auto 7
Auto 8
Auto 9
Auto 10
Custom 1
Custom 2
Custom 3
Custom 4
Custom 5
Custom 6
Custom 7
Continues on the next page