Chauvet MotionOrb User manual

TABLE OF CONTENTS
1. Before You Begin ........................................................................................................................................................6
What Is Included............................................................................................................................................................6
Unpacking Instructions...................................................................................................................................................6
Claims........................................................................................................................................................6
Manual Conventions......................................................................................................................................................6
Symbols.........................................................................................................................................................................6
Disclaimer......................................................................................................................................................................6
Product at a Glance.......................................................................................................................................................7
Safety Notes..................................................................................................................................................................7
2. Introduction..................................................................................................................................................................8
Product Description .......................................................................................................................................................8
Front View..................................................................................................................................................8
Views of the Top Bar ................................................................................................................................9
Dimensions..............................................................................................................................................10
3. Setup ..........................................................................................................................................................................11
AC Power.....................................................................................................................................................................11
Fuse Replacement.......................................................................................................................................................11
Fuse Replacement Diagram....................................................................................................................11
Power Linking..............................................................................................................................................................12
Power Linking Diagram............................................................................................................................12
Assembly.....................................................................................................................................................................13
Assembly Diagram...................................................................................................................................14
Mounting......................................................................................................................................................................15
Orientation...................................................................................................................................................................15
Standard Hanging....................................................................................................................................15
Custom Hanging......................................................................................................................................16
DMX Linking ................................................................................................................................................................17
DMX Linking Diagram..............................................................................................................................17
4. Operation....................................................................................................................................................................18
Control Panel Descriptions..........................................................................................................................................18
Menu Map....................................................................................................................................................................18
Standalone Configuration............................................................................................................................................19
Automatic Mode.......................................................................................................................................19
Automatic Programs.............................................................................................................................19
Automatic Program Speed ...................................................................................................................19
Sound Mode ............................................................................................................................................19
Sound Sensitivity..................................................................................................................................19
Custom Color...........................................................................................................................................19
Master/Slave Configuration..........................................................................................................................................20
Diagrams of Master/Slave Configurations...............................................................................................21
Configuring the Slaves.............................................................................................................................22
Configuring the Master ............................................................................................................................22
Length Setting..............................................................................................................................................................22
DMX Configuration ......................................................................................................................................................23
DMX Mode and Personality....................................................................................................................23
DMX Starting Address.............................................................................................................................23
MS Mode For DMX..................................................................................................................................24
Setting The MS Mode...........................................................................................................................25
DMX Channel Assignments.........................................................................................................................................26
Standard Personality ...............................................................................................................................26
DMX_9CH.............................................................................................................................................26
DMX_9CH.............................................................................................................................................27
Pixel Mapping Personalities.....................................................................................................................28
DMX_165CH.........................................................................................................................................29
DMX_240CH.........................................................................................................................................30
DMX_315CH.........................................................................................................................................31

5. Technical Information...............................................................................................................................................32
Product Maintenance...................................................................................................................................................32
6. Technical Specifications...........................................................................................................................................33
Returns...........................................................................................................................................................................34
Contact Us......................................................................................................................................................................35
1. Antes de Empezar .....................................................................................................................................................36
Qué va Incluido............................................................................................................................................................36
Instrucciones de Desembalaje.....................................................................................................................................36
Reclamaciones ........................................................................................................................................36
Convenciones del Manual............................................................................................................................................36
Símbolos......................................................................................................................................................................36
Exención de Responsabilidad......................................................................................................................................36
El Producto de un Vistazo............................................................................................................................................37
Notas de Seguridad.....................................................................................................................................................37
2. Introducción...............................................................................................................................................................38
Descripción del Producto.............................................................................................................................................38
Vista Frontal.............................................................................................................................................38
Vistas de la Barra Superior......................................................................................................................39
Dimensiones............................................................................................................................................40
3. Configuración............................................................................................................................................................41
Corriente Alterna..........................................................................................................................................................41
Sustitución del Fusible.................................................................................................................................................41
Diagrama de Sustitución del Fusible.......................................................................................................41
Alimentación en Cadena..............................................................................................................................................42
Diagrama de Alimentación en Cadena....................................................................................................42
Ensamblaje..................................................................................................................................................................43
Diagrama de Montaje ..............................................................................................................................44
Instalación....................................................................................................................................................................45
Orientación ..................................................................................................................................................................45
Forma de Colgar Estándar ......................................................................................................................45
Forma de Colgar Personalizada..............................................................................................................46
Enlace DMX.................................................................................................................................................................47
Diagrama de Enlace DMX.......................................................................................................................47
4. Funcionamiento.........................................................................................................................................................48
Descripciones del Panel de Control.............................................................................................................................48
Mapa de Menú.............................................................................................................................................................48
Configuración Independiente.......................................................................................................................................49
Modo Automático.....................................................................................................................................49
Programas Automáticos .......................................................................................................................49
Velocidad del Programa Automático....................................................................................................49
Modo por Sonido .....................................................................................................................................50
Sensibilidad al Sonido ..........................................................................................................................50
Personalizar el Color ...............................................................................................................................50
Conexión Maestro/Esclavo..........................................................................................................................................50
Diagramas de Configuraciones Maestro/Esclavo ...................................................................................51
Configurar los Esclavos...........................................................................................................................52
Configurar el Maestro ..............................................................................................................................52
Configuración de Longitud...........................................................................................................................................52
Configuración DMX......................................................................................................................................................53
Modo y Personalidad DMX......................................................................................................................53
Dirección DMX de Inicio ..........................................................................................................................53
Modo MS para DMX ................................................................................................................................54
Configurar el Modo MS.........................................................................................................................55
Asignación de Canal DMX...........................................................................................................................................56
Personalidad Estándar ............................................................................................................................56
DMX_9CH.............................................................................................................................................56
DMX_9CH.............................................................................................................................................57
Personalidades de Mapeo de Píxeles.....................................................................................................58
DMX_165CH.........................................................................................................................................59
DMX_240CH.........................................................................................................................................60

DMX_315CH.........................................................................................................................................61
5. Información Técnica..................................................................................................................................................62
Mantenimiento del Producto........................................................................................................................................62
6. Especificaciones Técnicas.......................................................................................................................................63
Devoluciones.................................................................................................................................................................64
Contacto.........................................................................................................................................................................65
1. Avant de commencer................................................................................................................................................66
Contenu.......................................................................................................................................................................66
Instructions de Déballage ............................................................................................................................................66
Réclamations...........................................................................................................................................66
Conventions Manuelles................................................................................................................................................66
Symboles.....................................................................................................................................................................66
Clause de Non Responsabilité.....................................................................................................................................66
Bref Descriptif de l'Unité ..............................................................................................................................................67
Consignes de Sécurité.................................................................................................................................................67
2. Introduction................................................................................................................................................................68
Description de l'Appareil..............................................................................................................................................68
Vue Frontale ............................................................................................................................................68
Vues de la Barre Supérieure ..................................................................................................................69
Dimensions..............................................................................................................................................70
3. Configuration.............................................................................................................................................................71
Alimentation CA...........................................................................................................................................................71
Remplacement des Fusibles........................................................................................................................................71
Schéma de Remplacement du Fusible....................................................................................................71
Chaînage Électrique....................................................................................................................................................72
Schéma de Chaînage Électrique.............................................................................................................72
Assemblage.................................................................................................................................................................73
Schéma d'Assemblage............................................................................................................................74
Montage.......................................................................................................................................................................75
Orientation...................................................................................................................................................................75
Suspension Standard ..............................................................................................................................75
Suspension Personnalisée......................................................................................................................76
Chaînage DMX............................................................................................................................................................77
Schéma de Chaînage DMX.....................................................................................................................77
4. Fonctionnement.........................................................................................................................................................78
Description du Panneau de Commande......................................................................................................................78
Plan du Menu...............................................................................................................................................................78
Configuration en Mode Autonome...............................................................................................................................79
Mode Automatique...................................................................................................................................79
Programmes Automatiques..................................................................................................................79
Vitesse de Programme Automatique....................................................................................................79
Mode d'Activation par le Son...................................................................................................................79
Sensibilité au Son.................................................................................................................................79
Couleur Personnalisée ............................................................................................................................80
Configuration Maître/Esclave.......................................................................................................................................80
Schémas des Configurations Maître/Esclave..........................................................................................81
Configuration des Esclaves.....................................................................................................................82
Configuration du Maître...........................................................................................................................82
Paramétrage de Longueur...........................................................................................................................................83
Configuration DMX ......................................................................................................................................................83
Mode DMX et Personnalité......................................................................................................................83
Adresse DMX de Départ..........................................................................................................................84
Mode MS pour DMX ................................................................................................................................85
Définition du Mode MS .........................................................................................................................86
Assignation des Canaux DMX.....................................................................................................................................87
Personnalité Standard.............................................................................................................................87
DMX_9CH.............................................................................................................................................87
DMX_9CH.............................................................................................................................................88

Personnalités de Mappage de Pixels ......................................................................................................89
DMX_165CH.........................................................................................................................................90
DMX_240CH.........................................................................................................................................91
DMX_315CH.........................................................................................................................................92
5. Informations Techniques..........................................................................................................................................93
Entretien de l'Appareil..................................................................................................................................................93
6. Spécificités Techniques............................................................................................................................................94
Renvois ..........................................................................................................................................................................95
Nous Contacter..............................................................................................................................................................96

1. Before You Begin
Page 6 of 96 MotionOrb™ User Manual Rev. 1
1.
B
EFORE
Y
OU
B
EGIN
What Is
Included
•MotionOrb™ top bar
•5 MotionOrb™ standard strings
•5 MotionOrb™ bottom strings
•Power cord
•Warranty card
•User Manual
Unpacking
Instructions
Carefully unpack the MotionOrb™ and check that all the parts are in the package, and are in
good condition.
Claims
If the box, or any of the contents, appear damaged from shipping, save all the packaging and
file a claim with the carrier immediately. Failure to report damage to the carrier immediately, or
failure to save all the packaging, can invalidate a claim.
For other issues, such as missing components or parts, damage not related to shipping, or
concealed damage, file a claim with CHAUVET® within 7 days of delivery. See Contact Us.
Manual
Conventions
Convention
Meaning
1–512
A range of values
50/60
A set of values
Settings
A menu option
Menu > Settings
A sequence of menu options
<Enter>
A button
Symbols
Convention
Meaning
Critical information. Ignoring it can cause malfunction, damage the product, or
harm the operator.
Important information. Ignoring it can cause the product to malfunction.
Useful information.
Disclaimer
The information and specifications contained in this User Manual are subject to change without
notice. CHAUVET® assumes no responsibility or liability for any errors or omissions, and
reserves the right to revise or recreate this manual at any time. The latest version of this manual
can be downloaded from http://www.chauvetlighting.com/product-manuals-literature/.
© Copyright 2014 CHAUVET®. All rights reserved.
Printed in the P.R.C.
Electronically published by CHAUVET® in the United States of America.
Author Date Editor Date
L. Henry
6/10/14
A. Leon
6/10/14

1. Before You Begin
MotionOrb™ User Manual Rev. 1 Page 7 of 96
Product at a
Glance
Use on Dimmer
x
Auto Program
P
Outdoor Use
x
Auto-Ranging Power Supply
P
Sound-Activated
P
Replaceable Fuse
P
DMX
P
User-Serviceable
x
Master/Slave
P
Safety Notes
These notes include important information about the mounting, use, and maintenance of this
product. Read these notes before using the product.
•Always connect the product to a grounded circuit.
•Make sure the power cord is not crimped or damaged.
•Always disconnect the product from the power source before cleaning it or replacing the
fuse.
•Never disconnect the product from the power source by pulling or tugging on the cord.
•Always secure the product with a safety cable when mounting it overhead.
•Keep the product away from flammable materials.
•The product is not intended for permanent installation.
•Use the product indoors only.
•Do not expose the product to rain or moisture.
•Make sure that the power source voltage is within the range stated on the label or on the
rear panel of the product.
•Never connect the product to a dimmer or a rheostat.
•Always replace the fuse with another fuse of the same type and rating.
•Always install the product in a location with adequate ventilation, and leave at least
20 in (50 cm) between the product and adjacent surfaces.
•Do not block the ventilations lots on the product’s housing.
•Do not operate the product in an ambient temperature higher than 104 °F (40 °C).
•Do not carry the MotionOrb™ by the orb strings.
•In the event of a serious operating problem, stop using the product immediately.
•Never try to repair the product. Repairs carried out by untrained people can lead to damage
or malfunction.
•If repairs are required, contact the nearest authorized technical assistance center.
•Keep this User Manual for future reference. If the product is sold, be sure to give this
manual to the next owner.

2. Introduction
Page 8 of 96 MotionOrb™ User Manual Rev. 1
2.
I
NTRODUCTION
Product
Description
The MotionOrb™ is an LED décor light made up of 60 individual LED orbs that change color
and strobe. The MotionOrb™ operates in Standalone or DMX control modes, and creates many
patterns and colors. The MotionOrb™ can be used in the standard configuration of 2 meters, or
it can be up to 4 meters long with the addition of MotionOrb™ Extensions. For more information
about MotionOrb™ Extensions, see the CHAUVET® website at www.chauvetlighting.com.
Front View

2. Introduction
MotionOrb™ User Manual Rev. 1 Page 9 of 96
Views of
the
Top Bar
LCD Display
Control Buttons
Microphone
DMX Signal Indicator
Front
Top
M10 Mounting Holes
M12 Mounting Holes
Back
Power Out
Power In
DMX In
DMX Out
Bottom
Orb String Sockets
Power Switch
Safety Loop

2. Introduction
Page 10 of 96 MotionOrb™ User Manual Rev. 1
Dimensions
85.5 in
2,343 mm
39.9 in
1,013 mm
2.6 in
65 mm
Front View
Side View

3. Setup
MotionOrb™ User Manual Rev. 1 Page 11 of 96
3.
S
ETUP
AC Power
The MotionOrb™ has an internal auto-ranging power supply that works with an input voltage
range of 100 to 240 VAC, 50/60 Hz.
To determine the product’s power requirements see the product label, or refer to
Technical Specifications in this manual. The listed current rating indicates the product’s average
current draw under normal conditions.
For more information, download Sizing Circuit Breakers from the CHAUVET® website
:
www.chauvetlighting.com/download/.
Always connect the product to a protected circuit.
Never connect the product to a rheostat or dimmer.
Fuse
Replacement
To replace the fuse, do the following:
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the fuse holder out of the housing.
4. Remove the blown fuse from the holder.
5. Insert a fuse of the exact same type and rating.
6. Replace the fuse holder back into the slot.
7. Reconnect the product to power.
Fuse
Replacement
Diagram
•Disconnect the product from power before replacing the fuse.
•Always replace a blown fuse with another of the same type and rating.
•A spare fuse is not included; however, the safety cap has room for one.
Installed Fuse
(held by plastic clip)
Spare Fuse Holder
(inside safety cap)
Safety Cap
Spare Fuse
(not included)

3. Setup
Page 12 of 96 MotionOrb™ User Manual Rev. 1
Power Linking
Power linking is daisy chaining products together through their Power In and Power Out sockets
allowing many products to be powered from one outlet.
Up to 16 MotionOrb™ products can be power linked at 120 V and up to 30 MotionOrb™
products can be power linked at 230 V.
The diagram below illustrates power-linking.
Power Linking
Diagram
•Do not power link more than 16 MotionOrb™ products at 120 V.
•Do not power link more than 30 MotionOrb™ products at 230 V.
•The power linking diagram above shows the North American version only!
•When using the MotionOrb™ anywhere other than North America, consult with the
local CHAUVET® distributor because power linking connectors and requirements
differ from country to country, and region to region.
1st Product
2nd Product
3rd Product
Additional Products

3. Setup
MotionOrb™ User Manual Rev. 1 Page 13 of 96
Assembly
Before assembling the MotionOrb™, read and follow the safety recommendations in the Safety
Notes.
Assemble the MotionOrb™ from the top down with the power off.
Rig the top bar where the MotionOrb™ will hang—for more information see Rigging
. Then
attach the standard orb strings to the top bar and the bottom orb strings to the standard
orb
strings—for more information see the Assembly Diagram.
The top bar of the MotionOrb™ has male connectors. The standard
orb strings have male
connectors on one end and female on the other end. The bottom
orb strings have female
connectors on one end and loops on the other end. The bottom
orb strings are always at the
bottom of the MotionOrb™.
The orb string connectors are 4-pin connectors with locking collars. There is a threa
ded collar
on the female connector that slides over, and twists onto, the threaded exterior of the male
connector. There are arrows on each connector so that the connectors can be aligned properly
before being screwed together.
To assemble the MotionOrb™, do the following:
1. Rig the top bar. For more information see Rigging.
2. Attach each of the standard orb strings directly to the top bar using the female connector
ends of the orb strings.
3. Attach each of the bottom orb strings to the standard orb strings using the male connector of
the standard orb strings and female connector of the bottom orb strings.
4. Make sure all the connections are finger tight.
5. Turn on the power.
•Make sure the power is off before assembling the MotionOrb™.
•The bottom orb strings—the ones with the loops—are always at the bottom of the
MotionOrb™.

3. Setup
Page 14 of 96 MotionOrb™ User Manual Rev. 1
Assembly
Diagram

3. Setup
MotionOrb™ User Manual Rev. 1 Page 15 of 96
Mounting
Rig the product from a structure or surface that can support its weight. See
Technical Specifications in this manual for the product’s weight.
Always use a mounting clamp and safety cable when mounting the product overhead. The
CHAUVET® CLP-15 clamp fits into the two M12 mounting holes and the CHAUVET® CLP-
10
clamp fits into the three M10 mounting holes. The CHAUVET® CH-05 safety cable
fits through
the safety loop.
For the CHAUVET® line of mounting clamps, go to www.chauvetlighting.com/cables-clamps-
main.html/.
Make sure that the structure onto which the product is mounted can support the product’s
weight. For weight information, see Technical Specifications.
Orientation
Hang the MotionOrb™ by attaching the top bar a to pipe or truss with mounting clamps so the
orbs strings hang straight down or are be draped up with the bottom loops tied off to another
structure.
Place the MotionOrb™ so that the top bar is acces
sible for programming and control panel
operation.
Standard
Hanging
Mounting Clamps
Safety Cable
Safety Loop

3. Setup
Page 16 of 96 MotionOrb™ User Manual Rev. 1
Custom Hanging
Safety Cables
Mounting Clamps

3. Setup
MotionOrb™ User Manual Rev. 1 Page 17 of 96
DMX Linking
DMX linking is daisy chaining more than one MotionOrb™, through the DMX In and Out ports.
The MotionOrb™ has two modes that require DMX linking:
•Master/Slave mode, in which the master MotionOrb™ sends DMX signals to the
MotionOrb™ slaves
•DMX mode, in which the DMX controller sends DMX signals to the MotionOrb™
To DMX link MotionOrb™ products do the following:
1. Connect the male end of the DMX cable to the DMX Out port of the master MotionOrb™, or
the DMX controller.
2. Connect the female end of the DMX cable to the DMX In port of the next MotionOrb™.
3. Connect the male end of another DMX cable to the DMX Out port of the MotionOrb™ in
step 2.
4. Connect the female end of the DMX cable into the next MotionOrb™.
5. Continue connecting each other MotionOrb™ until they are all part of the chain.
•When DMX linking MotionOrb™ products for Master/Slave mode, the master is the
first MotionOrb™ in the chain and there is no DMX controller. See Master/Slave
Configuration for details.
•When DMX linking MotionOrb™ products for DMX mode, the DMX controller is the
first thing in the line.
•Never connect more than 32 MotionOrb™ products together on a single DMX chain.
DMX Linking
Diagram

4. Operation
Page 18 of 96 MotionOrb™ User Manual Rev. 1
4.
O
PERATION
Control Panel
Descriptions
To access the control panel functions, use the four buttons underneath the display. The display
turns off after 15 seconds of inactivity.
Button
Function
<MENU>
Enters or exits from a menu function
<UP>
Navigates up through a list or increases a numeric value
<DOWN>
Navigates down through a list or decreases a numeric value
<ENTER>
Enters into a menu function or sets the currently shown value
Menu Map
The Menu Map outlines the functions available through the menu, the programming levels that
can be entered, and a description for each function.
Main Level
Programming Levels
Description
Automatic
Selects Automatic mode
Sound
Selects Sound mode
Sound Sen
1–3
Sets sensitivity to sounds
Dmx
Address
001–512
Selects DMX mode and sets DMX address
DMX Mode
DMX_9CH Selects the basic DMX personality for any
string length
DMX_165CH
Selects the DMX personality for 2 m long string
length (2 strings)
DMX_240CH
Selects the DMX personality for 3 m long string
length (3 strings)
DMX_315CH
Selects the DMX personality for 4 m long string
length (4 strings)
Speed
1–9
Sets speed of Auto mode
Program
Program01–Program30
Selects program for Automatic mode
MS
Yes
Selects Master/Slave mode
No
MS Master
Yes
Sets the product as the Master
No
MS Mode
1–3
Sets the Master/Slave mode
MS Address
1–3
Sets the Master/Slave address
Length
2M
Sets the length of the orb strings
3M
4M
Version
CHAUVET Ver.X.X
Displays the software version
Color
Red
000–255
Sets custom color values (0–100%)
Green
000–255
Blue
000–255

4. Operation
MotionOrb™ User Manual Rev. 1 Page 19 of 96
Standalone
Configuration
Standalone configurations allow the MotionOrb™ to operate without a DMX controller. There
are a variety of Standalone modes and they are powerful tools for making exciting looks.
Never connect a product in a S
tandalone mode (Auto or Sound) to a DMX chain that
includes a DMX controller. Products in Standalone mode transmit DMX signals
that
interfere with the DMX signals from the controller.
Automatic Mode
Automatic mode sets the MotionOrb™ to run through the currently selected program at a speed
set in the Speed function.
To set the MotionOrb™ to Automatic mode, do the following:
1. Make sure the MotionOrb™ is connected to a power source and not connected to a DMX
controller.
2. Press <MENU> repeatedly until Automatic shows on the display.
3. Press <ENTER>. The MotionOrb™ starts operating in Automatic mode.
Automatic
Programs
Program selects 1 of 30 preset color patterns and changes for the MotionOrb™ to go through in
Automatic mode.
1. Press <MENU> repeatedly until Program shows on the display.
2. Press <ENTER>. The currently selected program shows on the display.
3. Use <UP> or <DOWN> until the desired program shows on the display.
4. Press <ENTER> the MotionOrb™ starts operating in the newly selected program mode.
Automatic
Program Speed
The Speed setting adjusts how fast the MotionOrb™ goes through an automatic program.
To adjust the speed setting, do the following:
1. Press <MENU> repeatedly until Speed shows on the display.
2. Press <ENTER> and 1–3also shows on the display.
3. Use <UP> or <DOWN> until the desired speed shows on the display..
Sound Mode
Sound mode sets the MotionOrb™ to respond to sounds and music.
To set the MotionOrb™ to Sound mode, do the following:
1. Press <MENU> repeatedly until Sound shows on the display.
2. Press <ENTER>. The MotionOrb™ begins responding to sounds and music.
•The MotionOrb™ responds only to low frequencies of music such as bass or drums.
•If the MotionOrb™ does not respond to sounds or music increase the sound
sensitivity.
Sound Sensitivity
The Sound Sen setting adjusts the sensitivity of the MotionOrb™ microphone.
To adjust the sensitivity setting, do the following:
1. Press <MENU> repeatedly until Sound Sen and a number show on the display.
2. Use <UP> or <DOWN> until the desired sensitivity shows on the display.
Custom Color
Color sets all the orbs to a single color.
To set the MotionOrb™ to a single color, do the following:
1. Press <MENU> repeatedly until Color shows on the display.
2. Press <ENTER>. A color (Red, Green, Blue) shows in the display with 3 numbers under it
and the MotionOrb™ glows in the currently selected color.
3. Use <UP> or <DOWN> to adjust the color value 000–255 (0–100%).
Note: Selecting 000 turns off that color.
4. Press <ENTER>to set the color and scroll through the other colors.

4. Operation
Page 20 of 96 MotionOrb™ User Manual Rev. 1
Master/Slave
Configuration
Master/Slave mode allows a single MotionOrb™ (the master) to control the actions of one or
more MotionOrb™ products (the slaves) without a DMX controller. Master/Slave configuration
involves doing the following:
•Configuring the slaves with the MS mode and MS address.
•Configuring the master.
•Setting the master to Sound or Automatic mode.
The master and slaves are daisy chained though the DMX In and Out ports with the master
at
the beginning of the chain. For more information see DMX Linking above.
The MotionOrb™ products have three different Master/Slave modes in which they operate
singly, or in groups of 2, or in groups of 3.
•When configured singly there is one master and any number of slaves duplicating the
master.
•When configured in groups of 2 there is 1 master plus 1 slave for a group of 2. Then there
are any number of groups of slaves, with the 1st in the group duplicating the master and the
2nd in the group duplicating the slave.
•When configured in groups of 3 there is 1 master plus 2 slaves for a group of 3. Then there
are any number of groups of slaves, with the 1st in the group duplicating the master, the 2nd
in the group duplicating the 1st slave, and the 3rd in the group duplicating the 2nd slave.
See the diagrams below for the Master/Slave modes and how they group the MotionOrb™
products.