Chauvet Strike 324 User manual

User Manual

Edition Notes
STRIKE™ 324 User Manual Rev. 3
Edition Notes
The STRIKE™ 324 User Manual Rev. 3 covers the description, safety precautions,
installation, programming, operation, and maintenance of the STRIKE™ 324. Chauvet
released this edition of the STRIKE™ 324 User Manual in September 2014.
Trademarks
CHAUVET® is a registered trademark of CHAUVET & Sons Inc. (d/b/a CHAUVET® or
Chauvet). The CHAUVET® logo in its entirety including the CHAUVET® name and the
dotted triangle, and all other trademarks in this manual pertaining to services, products,
or marketing statements (example: It’s Green Thinking™
) are owned or licensed by
CHAUVET®. Any other
product names, logos, brands, company names, and other
trademarks featured or referred to within this document are the property of their
respective trademark holders.
Copyright Notice
Chauvet owns the content of this User Manual in its entirety, including but not limited to
pictures, logos, trademarks, and resources.
© Copyright 2014 Chauvet. All rights reserved.
Electronically published by Chauvet in the United States of America.
Manual Use
Chauvet authorizes its customers to download and print this manual for professional
information purposes only. Chauvet expressly prohibits the u
sage, copy, storage,
distribution, modification, or printing of this manual or its content for any other purpose
without written consent from Chauvet.
Document Printing
For better results, print this document in color, on letter size paper (8.5 x 11 in), double-
sided. If using A4 paper (210 x 297 mm), configure your printer to scale the content
accordingly.
Intended Audience
Any person in charge of installing, operating, and/or maintaining this product should
completely read through the guide that shipped with the product, as well as this manual,
before installing, operating, or maintaining this product.
Disclaimer
Chauvet believes that the information contained in this manual is accurate in all
respects. However, Chauvet assumes no responsibility for any errors or omissions in
this document. Chauvet reserves the right to revise and make changes to the content of
this document without obligation that Chauvet notify any person or company of such
revision or changes. This does not in any way constitute a commitment by Chauvet to
make such changes. Chauvet may issue a revision of this manual or a new edition to
incorporate such changes.
Document Revision
The STRIKE™ 324 User Manual Rev. 3 supersedes all previous versions of this manual.
Discard any older versions of this manual and replace with this version.
Go to
www.chauvetlighting.com/download/pro for the latest version.
Author Date Editor Date Updated
D. Couppe
09/29/14
A. Leon
09/29/14

Table of Contents
STRIKE™ 324 User Manual Rev. 3 -i-
Table of Contents
1. Before You Begin......................................................................................................................................1
What is Included ...........................................................................................................................................................1
Claims..........................................................................................................................................................................................1
Manual Conventions ....................................................................................................................................................................1
Symbols.......................................................................................................................................................................................1
Product at a Glance......................................................................................................................................................1
Safety Notes .................................................................................................................................................................2
Personal Safety............................................................................................................................................................................2
Mounting and Rigging..................................................................................................................................................................2
Power and Wiring.........................................................................................................................................................................2
Operation.....................................................................................................................................................................................2
Expected LED Lifespan................................................................................................................................................2
2. Introduction...............................................................................................................................................3
Description....................................................................................................................................................................3
Features........................................................................................................................................................................3
Overview.......................................................................................................................................................................4
Dimensions...................................................................................................................................................................5
3. Setup..........................................................................................................................................................6
AC Power......................................................................................................................................................................6
AC Plug........................................................................................................................................................................................6
Fuse Replacement.......................................................................................................................................................................6
Power Linking ...............................................................................................................................................................7
DMX Linking..................................................................................................................................................................7
DMX Modes .................................................................................................................................................................................7
Master/Slave Connectivity............................................................................................................................................................7
Mounting.......................................................................................................................................................................8
Orientation ...................................................................................................................................................................................8
Rigging.........................................................................................................................................................................................8
4. Operation...................................................................................................................................................9
Control Panel Description.............................................................................................................................................9
Control Options.............................................................................................................................................................9
Programming ................................................................................................................................................................9
DMX Personality ..........................................................................................................................................................................9
DMX Control.................................................................................................................................................................................9
Static Operation .........................................................................................................................................................................10
Auto Programs...........................................................................................................................................................................10
Auto Test....................................................................................................................................................................................10
Master/Slave..............................................................................................................................................................................10
Software Information..................................................................................................................................................................10
Temperature...............................................................................................................................................................................10
Backlight ....................................................................................................................................................................................10
Menu Map...................................................................................................................................................................11
DMX Values................................................................................................................................................................12
DMX Values (cont.).....................................................................................................................................................13
DMX Values (cont.).....................................................................................................................................................14
5. Technical Information.............................................................................................................................15
Product Maintenance..................................................................................................................................................15
Returns .......................................................................................................................................................................15
Technical Specifications.............................................................................................................................................16
Contact Us..................................................................................................................................................................17

Table of Contents
-ii- STRIKE™ 324 User Manual Rev. 3
NOTES

Before You Begin
STRIKE™ 324 User Manual Rev. 3 -1-
1. Before You Begin
What is Included
•STRIKE™ 324
•Neutrik® powerCON® power cord
•Warranty card
•Quick Reference Guide
Claims
Carefully unpack the product immediately and check the box to make sure all the parts
are in the package and are in good condition.
If the box or the contents (the product and included accessories) appear damaged from
shipping or show signs of mishandling, notify the carrier immediately, not Chauvet
.
Failure to report damage to the carrier immediately may inv
alidate your claim. In
addition, keep the box and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping,
or concealed damage, file a claim with Chauvet within 7 days of delivery.
Manual Conventions
Convention Meaning
1–512
A range of values in the text
50/60
A set of mutually exclusive values in the text
<SET>
A button on the product’s control panel
Settings
A product function or a menu option
MENU>Settings
A sequence of menu options
1–10
A range of menu values from which to choose in a menu
Yes/No
A set of two mutually exclusive menu options in a menu
ON
A unique value to be entered or selected in a menu
Symbols
Symbols Meaning
Critical installation, configuration, or operation information.
Failure to comply with this information may cause the product not
to work, damage third-party equipment, or cause harm to the
operator.
Important installation or configuration information. Failure to
comply with this information may keep the product from working.
Useful information.
The term “DMX” used throughout this manual refers to the USITT DMX512-A digital data
transmission protocol.
Product at a Glance
Use on Dimmer
x
Auto Programs
P
Outdoor Use
x
Auto-Ranging Power
Supply
P
Sound-Activated
x
Replaceable Fuse
P
DMX
P
User-Serviceable
x
Master/Slave
P

Before You Begin
-2- STRIKE™ 324 User Manual Rev. 3
Safety Notes
Read all the following Safety Notes before working with this product. These notes
include important information about the installation, usage, and maintenance of this
product.
This product contains no user-serviceable parts. Any reference to servicing in
this User Manual will only apply to properly trained Chauvet certified
technicians. Do not open the housing or attempt any repairs.
All applicable local codes and regulations apply to proper installation of this
product.
Personal Safety
•Avoid direct eye exposure to the light source while the product is on.
•CAUTION: Flashing light is known to trigger epileptic seizures. User must comply
with local laws regarding notification of strobe use.
•Always disconnect this product from its power source before servicing.
•Always connect this product to a grounded circuit to avoid the risk of electrocution.
•Do not touch this product’s housing during operation because it may be very hot.
Mounting and
Rigging
•This product is for indoor use only! (IP20) To prevent risk of fire or shock, do not
expose this product to rain or moisture.
•CAUTION: When transferring product from extreme temperature environments,
(e.g. cold truck to warm humid ballroom) condensation may form on the internal
electronics of the product. To avoid causing a failure, allow product to fully
acclimate to the surrounding environment before connecting it to power.
•Mount this product in a location with adequate ventilation, at least 20 in (50 cm)
from adjacent surfaces.
•Make sure there are no flammable materials close to this product while it is
operating.
•When hanging this product, always secure to a fastening device using a safety
cable.
•Use caution when loosening the barrel rotation knobs. If these knobs become too
loose, the barrel assembly may inadvertently separate from the reflector housing.
Power and Wiring
•Always make sure you are connecting this product to the proper voltage in
accordance with the specifications in this manual or on the product’s specification
label.
•To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
•Never connect this product to a dimmer pack or rheostat.
•Never disconnect this product by pulling or tugging on the power cable.
Operation
•Do not operate this product if you see damage on the housing, lenses, or cables.
Have the damaged parts replaced by an authorized technician at once.
•Do not cover the ventilation slots when operating to avoid internal overheating.
•The maximum ambient temperature is 113 °F (45 °C). Do not operate this product
at a higher temperature.
•In case of a serious operating problem, stop using this product immediately!
In the unlikely event that your Chauvet product may require service, contact Chauvet
Technical Support.
Expected LED
Lifespan
LEDs gradually decline in brightness over time, mostly because of heat. Packaged in
clusters, LEDs exhibit higher operating temperatures than in ideal, single-LED
conditions. For this reason, using clustered LEDs at their fullest intensity significantly
reduces the LEDs’ lifespan. Under normal conditions, this lifespan can be 40,000 to
50,000 hours. If extending this lifespan is vital, lower the operating temperature by
improving the ventilation around the product and reducing the ambient temperature to
an optimal operating range. In addition, limiting the overall projection intensity may also
help to extend the LEDs’ lifespan.

Introduction
STRIKE™ 324 User Manual Rev. 3 -3-
2. Introduction
Description
The STRIKE™ 324 combines 324 cool white SMD 5739 LEDs with a cast housing, to
create a strobe for touring and production applications. The body houses an 8-
segment
LED array, 3 and 5-pin DMX connections, and Neutrik® powerCON®
in and out easy
operation and connection. The All-
On feature allows the STRIKE™ 324 to be used as a
flood light in addition to being a strobe fixture..
Features
•1-, 5-, 8-, or 12-channel LED wash product
•Operating modes:
•1-channel: strobe
•5-channel: intensity, duration, rate, effect, macro
•8-channel: flash 1–8
•12-channel: flash 1–8, auto programs, auto speed, dimmer, strobe
•8-segment control for ultimate strobe design
•Multiple modes of DMX control, for ease-of-use
•Master/Slave control
•3-pin and 5-pin DMX
•Neutrik® powerCON® in/out
•Combine pixel control and special effect macros for stunning visual impact
•Rugged die-cast housing for touring and production

Introduction
-4- STRIKE™ 324 User Manual Rev. 3
Overview
Power In
Power Out
Control Panel
Front View
Rear View
Side View
Adjustment Knob
Double-Yoke
Bracket
Safety Cable Loop
DMX Out
DMX In
Fuse Holder
DMX In
DMX Out

Introduction
STRIKE™ 324 User Manual Rev. 3 -5-
Dimensions
7.25 in
184 mm
5.71 in
145 mm
3.74 in
95 mm
9.80 in
249 mm
6.30 in
160 mm
7.09 in
180 mm
9.06 in
230 mm

Setup
-6- STRIKE™ 324 User Manual Rev. 3
3. Setup
AC Power
Each STRIKE™ 324 has an auto-ranging power supply that works with an input voltage
range of 100 to
240 VAC, 50/60 Hz. To determine the power requirements for each
STRIKE™ 324, refer to the label affixed to th
e product. You can also refer to the
Technical Specifications chart in this manual.
The listed current rating indicates the maximum current draw during normal operation.
For more information, you may download Sizing Circuit Breakers from the Chauvet
website: www.chauvetlighting.com/download/pro.
•Always connect this product to a protected circuit with an appropriate
electrical ground to avoid the risk of electrocution or fire.
•To eliminate unnecessary wear and improve its lifespan, during periods of non-
use completely disconnect the product from power via breaker or by
unplugging it.
Never connect this product to a rheostat (variable resistor) or dimmer circuit, even
if the rheostat or dimmer channel serves only as a 0 to 100% switch.
AC Plug
The STRIKE™ 324 comes with a NEUTRIK® powerCON A connector on one end and
an Edison plug on the other end (US market). If the power cord adapter that came wi
th
your product has no plug or you need to change the Edison plug, use the table below to
wire the new plug.
Connection Wire (U.S.) Wire (Europe) Screw Color
AC Live
Black
Brown
Yellow or Brass
AC Neutral
White
Blue
Silver
AC Ground
Green/Yellow
Green/Yellow
Green
Make sure to disconnect the product’s power cord before replacing a blown fuse.
Always replace the blown fuse with another of the same type and rating.
Fuse Replacement
1. Disconnect this product from the power outlet.
2. Using a flat-head screwdriver, unscrew the fuse holder cap from the housing.
3. Remove the blown fuse and replace with another fuse of the same type and rating
(T 3.15 A, 250 V).
4. Screw the fuse holder cap back in place and reconnect power.

Setup
STRIKE™ 324 User Manual Rev. 3 -7-
Power Linking
The STRIKE™ 324 supports power linking. You can power link up to 11 products at
120 V, 19 at 208 V, or 21 at 230 V. This product comes with a power input cord. A
power
linking cable is available from Chauvet for purchase.
DMX Linking
You can link the STRIKE™ 324 to a DMX controller using a standard DMX serial
connection. If using other DMX compatible products with the STRIKE™ 324
, you can
control each individually with a single DMX controller.
DMX Modes
The STRIKE™ 324 uses the standard DMX data connection for the 1-, 5-, 8-, and
12-channel DMX modes.
•Refer to the Introduction chapter for a brief description of these modes.
•Refer to the Operation chapter to learn how to configure the STRIKE™ 324
to work in
these modes.
•The DMX Values section provides you with detailed information regarding the DMX
modes.
Master/Slave
Connectivity
The Master/Slave mode allows a STRIKE™ 324 (the “master”) to control one or more
STRIKE™ 324s (the “slaves”) without a DMX controller. One STRIKE™ 324
becomes
the master when running an Auto or Custom program, or by being in Static mode.
You must configure each slave’s control panel to operate in Slave
mode. During
Master/Slave operation, the slaves will operate in unison with the master.
DO NOT connect a DMX controller to products operating in Master/Slave mode.
The DMX controller signals may interfere with the signals from the master.
The Operation section of this manual provides detailed instructions on how to configure
the master and slaves.
If you are not familiar with or need more information about DMX standards, Master/Slave
connectivity, or the DMX
cables needed to link this product to a DMX controller,
download the DMX Primer from the Chauvet
website:
www.chauvetlighting.com/download/pro.

Setup
-8- STRIKE™ 324 User Manual Rev. 3
Mounting
Before mounting this product, read and follow the Safety Notes.
Orientation
Always mount this product in a safe position and make sure there is adequate room for
ventilation, configuration, and maintenance.
Rigging
The STRIKE™ 324 consists of a double-yoke bracket and the body of the product
Chauvet recommends using the following general guidelines when mounting th
is
product.
•When selecting an installation location, consider easy access to this product for
operation, programming adjustments, and routine maintenance.
•Make sure to mount this product away from any flammable material as indicated in
the Safety Notes.
•Never mount in places where rain, high humidity, extreme temperature changes, or
restricted ventilation may affect the product.
•If hanging this product, make sure that the mounting location can support the
product’s weight. See the Technical Specifications for the weight-bearing
requirements of this product.
•When hanging this product, always secure to a fastening device using a safety cable.
Procedure
The STRIKE™ 324 comes with a double-yoke bracket to which you can either attach
mounting clamps for hanging or simply use as a floor stand. You must supply your own
mounting clamps. Make sure the clamps are capable of supporting the weight of this
product. Use at least one mounting point per product.
Mounting Diagram
Floor Mounting
Overhead Mounting
Mounting Clamp
(such as CLP-15
or
CLP-15N from Chauvet)
Safety Cable
(such as CH-0
5
from Chauvet
)

Operation
STRIKE™ 324 User Manual Rev. 3 -9-
4. Operation
Control Panel
Description
Button Function
<MENU>
Exits from the current menu or function
<ENTER>
Enables the currently displayed menu or sets the currently
selected value in to the current function
<UP>
Navigates upward through the menu list and increases the
numeric value when in a function
<DOWN>
Navigates downward through the menu list and decreases the
numeric value when in a function
Control Options
You can set the STRIKE™ 324 starting address in the 001–512 DMX range. This
enables control of up to 42 products in the 12-channel 12 Ch personality.
Programming
Refer to the Menu Map to understand the menu options. The menu map shows the main
level and a variable number of programming levels for each option.
•To go to the desired main level, press <MENU> repeatedly until the option shows on
the display. Press <ENTER> to select. This will take you to the first programming
level for that option.
•To select an option or value within the current programming level, press <UP> or
<DOWN> until the option shows on the display. Press <ENTER> to select. In this
case, if there is another programming level, you will see that first option, or you will
see the selected value.
•Press <MENU> repeatedly to exit to the previous main level.
DMX Personality
This setting allows you to choose a particular DMX personality.
1. Go to the Channel main level.
2. Select the desired personality (
1 Ch
,
5 Ch
,
8 Ch
, or
12 Ch
).
•See the DMX Values section for the highest starting address you can select for each
personality.
•Make sure that the starting addresses on the various products do not overlap due to
the new personality setting.
DMX Control
In this mode, each product will respond to a unique starting address from the DMX
controller. All products with the same starting address will respond in unison.
1. Select a DMX personality as shown in DMX Personality.
2. Set the running mode:
a. Go to the M&S Mode main level.
b. Select Slave.
3. Set the starting address:
a. Go to the Address main level.
b. Select the starting address (001–512).
The highest recommended starting address for each DMX mode is as follows:
DMX Mode DMX Address
1 Ch
512
5 Ch
508
8 Ch
505
12 Ch
501

Operation
-10- STRIKE™ 324 User Manual Rev. 3
Static Operation
The Static mode allows the user to set the intensity and the strobe frequency from the
control panel without a DMX controller.
1. Go to the Static main level.
2. Select Dimmer.
•Choose desired intensity (000–255).
3. Select Strobe.
•Select the desired strobe frequency (000–255).
Auto Programs
Auto programs allow for control of pre-programmed strobe looks without a DMX
controller.
1. Go to the Auto main level.
2. Select the desired auto (Auto 0–7).
3. Select Speed.
4. Choose the desired speed value (
000–100
).
You cannot edit any of the auto programs (Auto 0–7).
Auto Test
This option allows you to test all the LEDs on the STRIKE™ 324.
1. Go to Info main level.
2. Select Auto > Test.
Master/Slave
The Master/Slave mode allows a group of STRIKE™ 324s (the slaves) to simultaneously
duplicate the output of another STRIKE™ 324 (the master) without a DMX controller.
1. Set each of the slaves:
a. Go to the M&S Mode main level.
b. Select Slave.
2. Set the master product:
a. Go to the M&S Mode main level.
b. Select Master.
c. Select an Auto or Static program as explained in Auto Programs.
•The master is the one that runs a program whether in Auto or Static mode.
•Do not connect a DMX controller to the products configured for Master/Slave
operation. The DMX controller may interfere with signals from the master product.
•The master should be the first product in the daisy chain.
Software Information
This option shows what version of software the STRIKE™ 324 is running.
1. Go to the Info main level.
2. Select Version and the version number will show on the screen.
Temperature
This option shows the internal temperature of the STRIKE™ 324.
•Go to the Temp xx° C main level.
Backlight
This setting allows you to set the amount of time the backlight on the STRIKE™ 324
stays on after the last button is pressed on the control panel.
1. Go to the BackLite main level.
2. Select On (remains on), 10S (10 seconds), 20S (20 seconds), or 30S (30 seconds).
3. Press <ENTER>.

Operation
STRIKE™ 324 User Manual Rev. 3 -11-
Menu Map
Main Level Programming Levels Description
Auto
Auto 0–7
Speed 001–100
8 automatic programs
Static
Dimmer
000–255
Sets the intensity of the light output
Strobe
Selects the strobe frequency
BackLite
On
Sets the amount of time the control panel
backlight stays on
10S
20S
30S
Info
Auto
Test
Sets product in test mode
Version Vx.x
Shows the installed software version
Address
001–512
Sets product’s DMX address
Channel
1 Ch
1-channel: strobe
5 Ch
5-channel: intensity, duration, rate, effect, macro
8 Ch
8-channel: Flash 1–8
12 Ch
12-channel: Flash 1–8, auto programs, auto
speed, dimmer, strobe
M&S Mode
Master
Selects Master mode
Slave
Selects Slave mode
Temp xx° C
Displays product’s internal temperature

Operation
-12- STRIKE™ 324 User Manual Rev. 3
DMX Values
1 Ch
Channel Function Value Percent/Setting
1 Strobe
000 ó005
006 ó255
No function
0–100%
5 Ch
Channel Function Value Percent/Setting
1 Flash Intensity
000 ó005
006 ó255
No function
0–100%
2
Flash Duration
000 ó255
0–100%
3 Flash Rate
000
ó
005
006 ó255
No function
0–100%
4 Special Effects
000 ó005
006 ó042
043 ó085
086 ó128
129 ó171
172 ó214
215
ó
255
No function
Ramp up
Ramp down
Ramp up – ramp down
Random
Lighting effect
Spike effect
5 Pixel Control Macros
000
ó
005
006 ó042
043 ó085
086 ó128
129 ó171
172 ó214
215 ó255
No function
Macro 1
Macro 2
Macro 3
Macro 4
Macro 5
Macro 6
To achieve blinder effects similar to a discharge strobe light, put channels 1, 2,
and 3 to 100%.

Operation
STRIKE™ 324 User Manual Rev. 3 -13-
DMX Values (cont.)
8 Ch
Channel Function Value Percent/Setting
1 Ring 1
000 ó005
006 ó255
No function
Slow to fast
2 Ring 2
000
ó
005
006 ó255
No function
Slow to fast
3 Ring 3
000 ó005
006 ó255
No function
Slow to fast
4 Ring 4
000
ó
005
006 ó255
No function
Slow to fast
5 Ring 5
000 ó005
006 ó255
No function
Slow to fast
6 Ring 6
000 ó005
006 ó255
No function
Slow to fast
7 Ring 7
000
ó
005
006 ó255
No function
Slow to fast
8 Ring 8
000 ó005
006
ó
255
No function
Slow to fast
Ring 1
Ring 2
Ring 3
Ring 4
Ring 5
Ring 6
Ring 7
Ring 8

Operation
-14- STRIKE™ 324 User Manual Rev. 3
DMX Values (cont.)
12 Ch
Channel Function Value Percent/Setting
1 Ring 1
000 ó005
006 ó255
No function
Slow to fast
2 Ring 2
000
ó
005
006 ó255
No function
Slow to fast
3 Ring 3
000 ó005
006 ó255
No function
Slow to fast
4 Ring 4
000
ó
005
006 ó255
No function
Slow to fast
5 Ring 5
000 ó005
006 ó255
No function
Slow to fast
6 Ring 6
000 ó005
006 ó255
No function
Slow to fast
7 Ring 7
000
ó
005
006 ó255
No function
Slow to fast
8 Ring 8
000 ó005
006
ó
255
No function
Slow to fast
9 Auto Programs
000 ó010
011 ó040
041 ó070
071 ó100
101 ó130
131 ó160
161 ó190
191 ó220
221 ó255
No function
Auto 0
Auto 1
Auto 2
Auto 3
Auto 4
Auto 5
Auto 6
Auto 7
10 Auto Speed 000 ó255
Slow to fast
(Only when Ch. 9 has Auto 0–7 activated)
11
Master Dimmer
000 ó255
0–100%
12 Master Strobe
000
ó
005
006 ó255
No function
0–25 Hz

Technical Information
STRIKE™ 324 User Manual Rev. 3 -15-
5. Technical Information
Product
Maintenance
To maintain optimum performance and minimize wear, you should clean this product
frequently. Usage and environment are contributing factors in determining the cleaning
frequency.
As a rule, clean this product at least twice a month. Dust build-up reduces
light output
performance and can cause overheating. This can lead to reduced light source life and
increased mechanical wear.
To clean your product:
•Unplug the product from power.
•Wait until the product is at room temperature.
•Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on
the external vents.
•Clean all external surfaces with a mild solution of non-ammonia glass cleaner or
isopropyl alcohol.
•Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue.
•Wipe any dirt or grime to the outside edges of the lens surface.
•Gently polish the lens surfaces until they are free of haze and lint.
Always dry the external surfaces thoroughly and carefully after cleaning them.
Returns
You must send the product prepaid, in the original box, and with the original packing and
accessories. Chauvet will not issue call tags.
Call Chauvet
and request a Return Merchandise Authorization (RMA) number before
shipping the product. Be prepared to provide the model number, serial number, and a
brief description of the cause(s) for the return.
Clearly label the package with an RMA number. Chauvet
will refuse any product
returned without an RMA number.
DO NOT write the RMA number directly on the box. Instead, write it on a properly affixed
label.
Once you have received the RMA number, include the following information on a piece
of paper inside the box:
•Your name
•Your address
•Your phone number
•The RMA number
•A brief description of the problem(s)
Be sure to pack the product
properly. Any shipping damage resulting from inadequate
packaging will be the customer’s responsibility. FedEx packing or double-boxing
are
recommended.
Chauvet reserves the right to use its own discretion to repair or replace returned
product(s).

Technical Information
-16- STRIKE™ 324 User Manual Rev. 3
Technical Specifications
Dimensions and
Weight
Length Width Height Weight
9.06 in (230 mm)
3.74 in (95 mm)
9.80 in (249 mm)
6.20 lb (2.8 kg)
Note: Dimensions in inches rounded to the nearest decimal digit.
Power
Power Supply Type
Range
Voltage Selection
Switching (internal)
100 to 240 VAC, 50/60 Hz
Auto-ranging
Parameter 120 V, 60 Hz 230 V, 50 Hz
Consumption
145 W
144 W
Operating
1.21 A
.62 A
Power linking current
(products)
13.6 A (11 products)
13.6 A (21 products)
Fuse
T 3.15 A, 250 V
T 3.15 A, 250 V
Power I/O U.S./Worldwide Europe
Power input connector
Neutrik® powerCON® A
Neutrik® powerCON® A
Power output connector
Neutrik® powerCON® B
Neutrik® powerCON® B
Power cord plug
Edison (U.S.)
Local plug
Light Source
Type
Power
Lifespan
LED
1 W
50,000 hours
Color
Quantity
Current
Cool White
324
250 mA
Photo Optic
Parameter Standard Optics
Illuminance @ 5 m
206 lx
Beam angle
120°
Field angle
120°
Thermal
Max. External Temperature
Cooling System
113 °F (45 °C)
Convection
DMX
I/O Connectors Connector Type Channel Range
3- and 5-pin XLR
Sockets
1, 5, 8 or 12
Ordering
Product Name Item Code UPC Number
STRIKE™ 324
03050778
781462211264