Chauvet JAM Pack Gold User manual

User Manual
LASER LIGHT
AVOID DIRECT EYE EXPOSURE
CLASS 3R LASER PRODUCT
CLASSIFIED PER EN/IEC 60825-1:2007
Complies with FDA performance standards
for laser products except for deviations
pursuant to Laser Notice No. 50, dated June
24, 2007.

Page 2 of 114 JAM Pack™ Gold User Manual Rev. 2
TABLE OF CONTENTS
1. Before You Begin................................................................................................................................7
What Is Included.......................................................................................................................................................7
Description................................................................................................................................................................7
Unpacking Instructions.............................................................................................................................................7
Claims .................................................................................................................................................................7
Manual Conventions.................................................................................................................................................7
Symbols....................................................................................................................................................................7
Safety Notes.............................................................................................................................................................8
Non-Interlocked Housing Warning......................................................................................................................9
Laser Safety Notes...................................................................................................................................................9
Disclaimer...............................................................................................................................................................10
Laser Safety Label Reproduction......................................................................................................................11
Laser Exposure Warning...................................................................................................................................12
Laser Emission Data.........................................................................................................................................12
Laser Compliance Statement............................................................................................................................12
2. Introduction.......................................................................................................................................13
Overview.................................................................................................................................................................13
Overview.................................................................................................................................................................14
Dimensions.............................................................................................................................................................15
Dimensions (Cont.).................................................................................................................................................16
3. Setup .................................................................................................................................................17
Fog Machine AC Power .........................................................................................................................................17
External AC Power Supplies ..................................................................................................................................17
Mounting.................................................................................................................................................................18
Orientation.........................................................................................................................................................18
Installation (Rigging) .........................................................................................................................................18
Mounting Diagram.......................................................................................................................................18
Proper Usage .........................................................................................................................................................19
4. Operation...........................................................................................................................................19
Fog Machine Wired Remote...................................................................................................................................19
UV Strobe Control Panel Operation.......................................................................................................................19
UV Strobe Combo ..................................................................................................................................................19
Strobe Modes.........................................................................................................................................................19
Laser Control Switch Operation .............................................................................................................................19
IRC-6 Remote (Infrared Remote Control) ..............................................................................................................20
5. Technical Information.......................................................................................................................21
General Product Maintenance................................................................................................................................21
Fog Machine Maintenance.....................................................................................................................................21
6. General Fogger Troubleshooting .................................................................................................... 22
7. Technical Specifications.................................................................................................................. 23
Returns..................................................................................................................................................25
Contact Us.............................................................................................................................................26
1. Antes de empezar.............................................................................................................................27
Qué va incluido.......................................................................................................................................................27
Descripción.............................................................................................................................................................27
Instrucciones de desembalaje................................................................................................................................27
Reclamaciones..................................................................................................................................................27
Convenciones del manual......................................................................................................................................27

JAM Pack™ Gold User Manual Rev. 2 Page 3 of 114
Símbolos.................................................................................................................................................................28
Notas de seguridad ................................................................................................................................................28
Advertencia sobre carcasa no cerrada .............................................................................................................30
Notas de seguridad sobre láser .............................................................................................................................30
Exención de responsabilidad .................................................................................................................................31
Reproducción de la etiqueta de seguridad del láser.........................................................................................32
Advertencia sobre exposición al láser ..............................................................................................................33
Datos de emisión láser......................................................................................................................................33
Declaración de conformidad láser.....................................................................................................................33
2. Introducción......................................................................................................................................34
Vista general...........................................................................................................................................................34
Vista general...........................................................................................................................................................35
Dimensiones...........................................................................................................................................................36
Dimensiones (cont.)................................................................................................................................................37
3. Configuración ...................................................................................................................................38
Alimentación CC de la máquina de niebla .............................................................................................................38
Fuentes de alimentación de CA externas ..............................................................................................................38
Montaje...................................................................................................................................................................39
Orientación........................................................................................................................................................39
Instalación (anclaje) ..........................................................................................................................................39
Diagrama de montaje..................................................................................................................................40
Uso adecuado ........................................................................................................................................................41
4. Funcionamiento................................................................................................................................41
Mando a distancia con cable de la máquina de niebla ..........................................................................................41
Funcionamiento del panel de control del estroboscopio UV..................................................................................41
Combo UV Estroboscopio......................................................................................................................................41
Modos estroboscopio .............................................................................................................................................41
Funcionamiento del interruptor de control del láser...............................................................................................42
Mando a distancia IRC-6 (control remoto por infrarrojos)......................................................................................42
5. Información técnica..........................................................................................................................43
Mantenimiento general del producto......................................................................................................................43
Mantenimiento de la máquina de niebla ................................................................................................................43
6. Resolución general de problemas de la máquina de niebla.......................................................... 44
7. Especificaciones técnicas................................................................................................................ 45
Devoluciones ........................................................................................................................................47
Contacto................................................................................................................................................48
1. Avant de commencer........................................................................................................................49
Contenu..................................................................................................................................................................49
Description..............................................................................................................................................................49
Instructions de déballage .......................................................................................................................................49
Réclamations.....................................................................................................................................................49
Conventions manuelles..........................................................................................................................................49
Symboles................................................................................................................................................................50
Consignes de Sécurité ...........................................................................................................................................50
Avertissement de boîtier non-verrouillé.............................................................................................................52
Consignes de Sécurité des lasers..........................................................................................................................52
Clause de non Responsabilité................................................................................................................................53
Reproduction de l'étiquette de sécurité laser....................................................................................................54
Avertissement d'exposition au laser..................................................................................................................55
Données d'émission laser.................................................................................................................................55
Déclaration de conformité laser ........................................................................................................................55

Page 4 of 114 JAM Pack™ Gold User Manual Rev. 2
2. Introduction.......................................................................................................................................56
Vue d'ensemble......................................................................................................................................................56
Vue d'ensemble......................................................................................................................................................57
Dimensions.............................................................................................................................................................58
Dimensions (suite)..................................................................................................................................................59
3. Configuration....................................................................................................................................60
Alimentation CA de la machine à brouillard ...........................................................................................................60
Alimentation externe CA.........................................................................................................................................60
Installation ..............................................................................................................................................................61
Orientation.........................................................................................................................................................61
Montage ............................................................................................................................................................61
Schéma de montage...................................................................................................................................62
Utilisation appropriée..............................................................................................................................................63
4. Utilisation ..........................................................................................................................................63
Télécommande de la machine à brouillard ............................................................................................................63
Utilisation du panneau de commande du stroboscope UV....................................................................................63
Combo lampe UV/stroboscope ..............................................................................................................................63
Modes.....................................................................................................................................................................63
Fonction-nement du commutateur de contrôle du laser.........................................................................................64
Télécommande IRC-6 (Télécommande par infrarouge) ........................................................................................64
5. Informations Techniques .................................................................................................................65
Entretien général des appareils..............................................................................................................................65
Entretien de la machine à brouillard.......................................................................................................................65
6. Dépannage général de la machine à brouillard .............................................................................. 66
7. Spécifications techniques................................................................................................................67
Renvois .................................................................................................................................................69
Nous Contacter.....................................................................................................................................70
1. Erste Schritte ....................................................................................................................................71
Packungsinhalt.......................................................................................................................................................71
Beschreibung..........................................................................................................................................................71
Anweisungen für das Auspacken...........................................................................................................................71
Schadensmeldung.............................................................................................................................................71
Konventionen des Handbuchs ...............................................................................................................................71
Symbole..................................................................................................................................................................72
Sicherheits-hinweise...............................................................................................................................................72
Achtung! Kein Schutz bei geöffnetem Gehäuse...............................................................................................74
Hinweise zur Laser-sicherheit ................................................................................................................................74
Haftungs-ausschluss..............................................................................................................................................75
Warn- und Sicherheitsschilder auf dem Lasergerät..........................................................................................76
Warnung vor Laserstrahlen...............................................................................................................................77
Laseremissions-daten.......................................................................................................................................77
Laser-Konformitäts-erklärung............................................................................................................................77
2. Einleitung..........................................................................................................................................78
Übersicht ................................................................................................................................................................78
Übersicht ................................................................................................................................................................79
Abmessungen.........................................................................................................................................................80
Abmessungen (Fortsetz.).......................................................................................................................................81
3. Einrichten des Geräts.......................................................................................................................82
Geräteschalter der Nebelmaschine........................................................................................................................82
Externe Netzkabel für Wechselstrom.....................................................................................................................82

JAM Pack™ Gold User Manual Rev. 2 Page 5 of 114
Montage..................................................................................................................................................................83
Montagerichtung................................................................................................................................................83
Installation (hängende Montage).......................................................................................................................83
Montageansicht...........................................................................................................................................84
Bestimmungsgemäße Verwendung.......................................................................................................................85
4. Betrieb...............................................................................................................................................85
Drahtge-bundene Fernbedienung der Nebel-maschine.........................................................................................85
Betrieb des Bedienfelds für UV-Strobe ..................................................................................................................85
UV-Strobe-Kombi ...................................................................................................................................................85
Strobe-Modi............................................................................................................................................................85
Betrieb des Steuer-schalters für das Laser-Gerät..................................................................................................86
IRC-6-Fernbedienung (Infrarot-Fernbedienung) ....................................................................................................86
5. Technische Informationen ...............................................................................................................87
Allgemeine Produkt-wartung..................................................................................................................................87
Wartung der Nebelmaschine..................................................................................................................................87
6. Nebelmaschine – allgemeine Fehlersuche...................................................................................... 88
7. Technische Daten.............................................................................................................................89
Reklama-tionen.....................................................................................................................................91
Kontakt..................................................................................................................................................92
1. Voordat u begint ...............................................................................................................................93
Wat is er inbegrepen ..............................................................................................................................................93
Beschrijving............................................................................................................................................................93
Uitpakinstructies.....................................................................................................................................................93
Claims ...............................................................................................................................................................93
Conventies van deze handleiding ..........................................................................................................................93
Symbolen................................................................................................................................................................94
Veiligheidsvoorschriften .........................................................................................................................................94
Niet-bevestigde waarschuwing op de behuizing...............................................................................................96
Veiligheidsvoorschriften voor de laser....................................................................................................................96
Disclaimer...............................................................................................................................................................97
Reproductie van veiligheidsetiket voor de laser................................................................................................98
Blootstellingswaarschuwing van de laser .........................................................................................................99
Emissiegegevens van de laser .........................................................................................................................99
Nalevingsverklaring van de laser ........................................................................................................................99
2. Inleiding........................................................................................................................................... 100
Overzicht ..............................................................................................................................................................100
Overzicht ..............................................................................................................................................................101
Afmetingen ...........................................................................................................................................................102
Afmetingen (vervolg) ............................................................................................................................................103
3. Instelling..........................................................................................................................................104
Wisselstroom bij de rookmachine.........................................................................................................................104
Externe wisselstroomvoedingen...........................................................................................................................104
Montage................................................................................................................................................................105
Oriëntatie.........................................................................................................................................................105
Installatie (opbouw).........................................................................................................................................105
Montagediagram .......................................................................................................................................106
Correct gebruik.....................................................................................................................................................107
4. Werking ...........................................................................................................................................107
Bedrade afstandsbediening van de rookmachine................................................................................................107
Werking van het bedieningspaneel van de UV-stroboscoop ...............................................................................107

Page 6 of 114 JAM Pack™ Gold User Manual Rev. 2
UV-stroboscoop combinatie .................................................................................................................................108
Stroboscoopmodi..................................................................................................................................................108
Gebruik van de laserbedieningsschakelaar .........................................................................................................108
IRC-6 afstandsbediening (infrarood afstandsbediening)......................................................................................108
5. Technische informatie.................................................................................................................... 109
Algemeen onderhoud van het product.................................................................................................................109
Onderhoud van de rookmachine..........................................................................................................................109
6. Algemene problemen met de rookmachine oplossen.................................................................. 110
7. Technische Specificaties ............................................................................................................... 111
Retouren..............................................................................................................................................113
Neem contact Op................................................................................................................................114

JAM Pack™ Gold User Manual Rev. 2 Page 7 of 114
1. BEFORE YOU BEGIN
What Is
Included
•Laser
•Derby
•Fog Machine
•UV Strobe combo
•IRC-6 Remote
•Power Cord
•3 Power Supply Units
•CHAUVET®Fog Fluid (FJP)
•Warranty Card
•User Manual
Description
The Just Add Music, JAM Pack™ Gold is the ultimate all-in-one easy party system that
includes:
•A laser with a dual-color laser light that creates a dynamic red and green pattern in either
Automatic or Sound-Active mode.
•A tri-color derby effect light with high-powered red, green, and blue LEDs that reside behind
28 lenses. IRC-6 remote controllable motor speed and sound-active or automated
programs, allows anyone to create instant entertainment.
•A compact fog machine, that emits thick bursts of water-based fog to enhance any light
show. A pint of water-based fog fluid is included for immediate usability.
•A UV wash and strobe combo in a blacklight strip with the ability to strobe bright white while
maintaining a cool UV wash effect. You can manually change the speed of the strobe, or
set it to Automatic or Sound-Active modes. Also compatible with the IRC-6.
Unpacking
Instructions
Carefully unpack the product immediately and check the box to make sure all the parts are in
the package and are in good condition.
Claims
If the box or the contents (the product and included accessories) appear damaged from
shipping or show signs of mishandling, notify the carrier immediately, not Chauvet. Failure to
do so in a timely manner may invalidate your claim with the carrier. In addition, keep the
container and all the packing material for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or
concealed damage, file a claim with Chauvet within 7 days of delivery.
Manual
Conventions
Convention
Meaning
1–512
A range of values
50/60
A set of values of which only one can be chosen
Settings
A menu option not to be modified
Menu > Settings
A sequence of menu options to be followed
<ENTER>
A key to be pressed on the product’s control panel
ON
A value to be entered or selected
Symbols
Symbol
Meaning
Critical installation, configuration, or operation information. Ignoring this
information can cause the product to not work, damage it, or cause harm to
the operator.
Important installation or configuration information. The product may not
function correctly if this information is not used.
Useful information.

Page 8 of 114 JAM Pack™ Gold User Manual Rev. 2
Safety Notes
The Safety Notes include important laser system safety information. Read and understand all
instructions before powering on the laser for the first time
. Knowing these safety instructions is
crucial to avoiding laser eye injury and breaking the law. Keep this User Manual
in a safe place
for future reference.
STOP AND READ ALL LASER SAFETY DATA
•Lasers can be hazardous and have unique safety considerations. Permanent eye injury and
blindness is possible if lasers are used incorrectly. Pay close attention to each safety
REMARK and WARNING statement in this User Manual. Read all instructions carefully
BEFORE operating this device.
•Always connect the product to a grounded circuit to avoid the risk of electrocution.
•Always disconnect the product from the power source before cleaning.
•Avoid direct eye exposure to the light source while the product is on.
•Make sure the power cord is not crimped or damaged.
•Never disconnect the product from power by pulling or tugging on the cord.
•If mounting the product overhead, always secure to a fastening device using a safety cable.
•Make sure there are no flammable materials close to the product when operating.
•Do not touch the product’s housing when operating because it may be very hot.
•This product is not intended for permanent installation.
•Always make sure that the voltage of the outlet to which you are connecting the product is
within the range stated on the decal or rear panel of the product.
•The product is for indoor use only! (IP20) To prevent risk of fire or shock, do not expose the
product to rain or moisture.
•Always install the product in a location with adequate ventilation, at least 20 in (50 cm) from
adjacent surfaces.
•Be sure that no ventilation slots on the product’s housing are blocked.
•Never connect the product to a dimmer.
•Always use the mounting bracket to carry the product.
•Do not switch the product on/off in short intervals. This will reduce the laser diode life.
•Do not shake this product. Avoid brute force when mounting or operating this product.
•ALWAYS use a safety cable when mounting the product overhead.
•The maximum ambient temperature for the derby, UV strobe and fogger is 104 °F
(40 °C). Do not operate these products at higher temperatures.
•The ambient operating temperature for the laser is 59 °F to 95 °F (15 °C to 35 °C). Do not
operate this product outside this range.
•In the event of a serious operating problem, stop using the product immediately.
•Never try to repair the product. Repairs carried out by unskilled people can lead to damage
or malfunction. Contact the nearest authorized technical assistance center.
•Do not use for space heating purposes.
•Use only CHAUVET® water-based fog fluid.
•Drain the tank before transporting the product.
•To eliminate unnecessary wear and improve the lifespan, during periods of non-use
completely disconnect the products from power via breaker or by unplugging it.
FCQ (Fog Cleaner Quart) was specifically developed by Chauvet to clean your
fog
machine. Make sure you use FCQ regularly to increase the life of your product.
CAUTION! Use of controls, adjustments, or procedures other than THOSE specified IN
THIS USER MANUAL may result in hazardous radiation exposure.

JAM Pack™ Gold User Manual Rev. 2 Page 9 of 114
•Avoid direct eye contact with laser light. Never intentionally expose your eyes or others to
direct laser light.
•This laser product can potentially cause instant eye injury or blindness if laser light directly
strikes the eyes.
•It is illegal and dangerous to shine this laser into audience areas, where the audience or
other personnel could get direct laser beams or bright reflections into their eyes.
•It is a U.S. federal offense to shine any laser at aircraft.
•Use of controls, adjustments, or procedures other than those specified in this User Manual
may result in hazardous radiation exposure.
•DO NOT attempt any repairs. Repairs and servicing must be carried out by a certified
technician. Unauthorized modifications are forbidden for safety reasons!
•Keep this User Manual for future consultation. If transferring ownership of the product
to another user, be sure this document is kept with the laser.
Non-Interlocked
Housing Warning
•This unit contains high power laser devices internally.
•Do not open the laser housing, due to potential exposure to unsafe levels of laser radiation.
•The laser power levels, accessible if the unit is opened, can cause instant blindness, skin
burns, and fires.
Laser Safety
Notes
STOP AND READ ALL THE LASER SAFETY NOTES BELOW
Laser light is different from any other light. Laser light can cause eye injury if the product is not
set up and used properly. Laser light is a thousand times more concentrated than
any other kind
of light. This concentration can cause instant eye injuries by burning the retina (the light-
sensitive portion at the back of the eye). The heat from a laser light cannot be felt, but it can still
injure or blind product operators and the audience. Even very small amounts of laser light
at
long distances are are potentially hazardous.
DO NOT assume that exposure to an individual laser beam is safe, even a tiny beam split off
from a larger beam. This laser product uses dozens of milliwatts of laser power—
Class 3B
levels internally—and splits them into multiple beams—Class 3R levels. The individual
Class 3R
level beams are potentially hazardous to the eyes.
DO NOT assume that a moving laser light is safe. Laser light is never without risk
. Since eye
injuries can occur instantly, it is critical to prevent the possibility of ANY
direct eye exposure.
According to laser safety regulations, it is not legal to aim Class 3R lasers into areas where
people can be exposed, even if the laser is aimed below people’s faces, such as at
a dance
floor.

Page 10 of 114 JAM Pack™ Gold User Manual Rev. 2
•Do not operate the laser without first reading and understanding all the safety and technical
data in this manual.
•ALWAYS set up and install all laser effects so that any laser light is at least 3 meters
(9.8 feet) above the floor on which people are standing. See the Proper Usage section of this
manual.
•After setup, and prior to public use, test the lasers to ensure they are functioning properly.
Do not use the product if any defect is detected.
•DO NOT use laser if it is emitting only one or two beams, rather than dozens/hundreds, as
this indicates damage to the diffraction grating optic, and allows emission of laser levels
higher than Class 3R.
•DO NOT point lasers at people or animals.
•DO NOT look into the laser aperture or laser beams.
•DO NOT point lasers into areas where people could be exposed to them.
•DO NOT point lasers at highly reflective surfaces such as windows, mirrors, and shiny metal.
Even laser reflections can be hazardous.
•Never point a laser at aircraft; this is a U.S. federal offense.
•Never point un-terminated laser beams into the sky.
•Do not expose the output optic (aperture) to harsh cleaning chemicals.
•Do not use the laser if the housing is damaged, open, or if the optics appear damaged in any
way.
•Never open the laser housing. The high laser power levels inside of the protective housing
can start fires or burn skin, and will cause instant eye injury.
•Never leave this product running unattended.
•The operation of a Class 3R laser show is allowed only if the lasers are operated by a skilled
and well-trained professional, who is familiar with the data included in this manual.
•The legal requirements for using laser entertainment products vary from country to country.
The user is responsible for the legal requirements in the location/country of use.
CAUTION! Do not operate this device in ways not specified in this User Manual. Failure to follow the
instructions will void the warranty, may damage the product, or injure the user or the audience.
CAUTION! This product cannot be discarded with household waste. Contact your local waste
management service for electronic disposal regulations in your area.
Disclaimer
The information and specifications contained in this document are subject to change without
notice. Chauvet assumes no responsibility or liability for any errors or omissions that may
appear in this manual, and reserves the right to revise or recreate this manual at any time.
Download the latest version from http://www.chauvetlighting.com/product-manuals-literature/.
© Copyright 2015 Chauvet. All rights reserved.
Printed in P.R.C.
Electronically published by Chauvet in the United States of America.
Author
Date
Editor
Date
R. Isenstadt 03/26/15 M. Trouard 05/13/15

JAM Pack™ Gold User Manual Rev. 2 Page 11 of 114
Laser Safety Label
Reproduction
Front
Rear
Top
Bottom

Page 12 of 114 JAM Pack™ Gold User Manual Rev. 2
Laser Exposure
Warning
LASER LIGHT AVOID DIRECT EYE EXPOSURE
Further guidelines and safety programs for safe use of lasers can be found in the ANSI Z136.1
Standard “For Safe Use of Lasers”, available from the Laser Institute of America:
www.laserinstitute.org. Many local governments, corporations, agencies, military,
and others,
require all lasers to be used under the guidelines of ANSI Z136.1. Laser Display guidance can
be obtained via the International Laser Display Association: www.laserist.org.
Laser Emission
Data
As measured under
IEC measurement
conditions for
classification
Laser Classification Class 3R
Green Laser Medium DPSS Nd:YVO4, 532 nm/30 mW
Red Laser Medium LD GaAIAs, 650 nm/100 mW
Beam Diameter <5 mm at aperture
Pulse Data All pulses < 4 Hz (>0.25 sec)
Divergence (each beam) <2 mrad
Divergence (total light) <160 degrees
Laser Power of Each Beam from Aperture <5 mW
Laser
Compliance
Statement
This laser product complies with EN/IEC 60825-1 Ed 2, 2007-03, and U.S. FDA/CDRH
FLPPS via the terms of Laser Notice No. 50 dated June 24, 2007.
This laser device is
classified 3R. (Class 3R is the international equivalent of U.S. Class IIIa.
) No maintenance
is required to keep this product in compliance with laser performance standards.

JAM Pack™ Gold User Manual Rev. 2 Page 13 of 114
2. INTRODUCTION
Overview
Laser
Derby
Laser
Aperture
IR
Sensor
Front View Back Panel View
Lenses
Safety
Loop
Microphone
Sensitivity
Adjustment
DC Power In
DC Power In
Motor Speed
Adjustment
Microphone
Music/On/Off
Switch

Page 14 of 114 JAM Pack™ Gold User Manual Rev. 2
Overview
(Cont.)
UV Strobe Combo
Fog Machine
Fuse
Holder
UV and
Strobe
Menu
Buttons
Sound
Sensitivity
Adjustment
IR Sensor
Back Panel View
Front View
DC Power
In
Indicato
r
LED
Microphone
Power In
Fog
Nozzle
Wired
Remote
Fluid Line
Fog Fluid
Level
Indicator
Fog Fluid
Tank
Cover

JAM Pack™ Gold User Manual Rev. 2 Page 15 of 114
Dimensions
Laser
Derby
8 in
203 mm
4.8 in
120 mm
3.7 in
94 mm
4 in
101 mm
7 in
177 mm
6.6 in
167 mm

Page 16 of 114 JAM Pack™ Gold User Manual Rev. 2
Dimensions
(Cont.)
UV Strobe Combo
Fog Machine
2 in
55 mm
1.5 in
40 mm
21 in
537 mm
8.5 in
215 mm
7.1 in
180 mm
4.9 in
124 mm

JAM Pack™ Gold User Manual Rev. 2 Page 17 of 114
3. SETUP
Fog Machine
AC Power
The JAM Pack™ Gold fog machine has a fixed voltage
power supply and it can work with an
input voltage of 120 VAC at 60 Hz.
The listed current rating indicates the product’s average current draw under normal conditions.
•Always connect the product to a protected circuit (circuit breaker or fuse). Make sure
the product has an appropriate electrical ground to avoid the risk
of electrocution or
fire.
•To eliminate wear and improve its lifespan, during periods of non-
use completely
disconnect from power via breaker or by unplugging it.
Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if the
rheostat or dimmer channel serves only as a 0 to 100% switch.
Fog Machine
Fuse
Replacement
1. Disconnect the fogger from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the b
lown fuse from the clip on the front of the safety cap and replace with a fuse of the exact
same type and rating.
5. Re-insert the fuse holder and reconnect power.
The product does not ship with a spare fuse; however, the safety cap has room for a
spare.
Always replace a blown fuse with a fuse of the same type and rating.
External AC
Power
Supplies
The JAM Pack™ Gold products (excluding the fog machine) have an external auto-ranging
power supply and can work with an input voltage range of 100 to 240 VAC, 50/60 Hz.

Page 18 of 114 JAM Pack™ Gold User Manual Rev. 2
Mounting
Before mounting the product, read and follow the safety recommendations indicated in the
Safety Notes. The JAM Pack™ Gold products can be surface
mounted, but if you choose to
mount overhead using the mounting hole, do this with a screw, nut and bolt, or a hanging clamp.
When rigging, consider routine maintenance. Please see the following notes on installation.
Orientation
The JAM Pack™ Gold products must be mounted in a position that includes planning for safe
laser usage. In addition, make sure adequate ventilation is provided around the product.
Installation
(Rigging)
•Before deciding on a location for the product, always make sure there is easy access to the
product for maintenance and programming.
•Make sure that the structure or surface onto which you are mounting the product can support
the product’s weight (see Technical Specifications).
•When mounting the product overhead, always use a safety cable. Mount the product
securely to a rigging point, such as an elevated platform or a truss.
•When aiming the products, you may use the bracket adjustment knob(s). Loosen the
knob(s), adjust to the desired angle, and then tighten the knob(s) by turning clockwise. Do
not use tools for this step, as it may cause damage.
Mounting Diagram
L-Brackets
Mounting Clamp
Bracket
Adjustment
Knobs
Mounting
Clamp
Safety
Cable
Rubber Feet
(x4) for Floor
Mounting
Mounting
Bracket
Surface
Mounting

JAM Pack™ Gold User Manual Rev. 2 Page 19 of 114
Proper Usage
This laser product is for overhead mounting only. For safety purposes, Chauvet recommends
mounting light
ing effect products on steady elevated platforms or sturdy overhead supports
using suitable hanging clamps. In all cases, use safety cables. O
btain appropriate mounting
hardware from your lighting vendor.
International laser safety regulations require that laser products must be operated in the fashion
illustrated below, with a minimum of 3 meters (9.8 ft) of vertical separation between the floor and
the lowest laser light. Additionally, 3 meters of horizontal separation is required between laser
light and audience or other public spaces.
CAUTION! Use of controls, adjustments, or procedures other than THOSE specified IN
THIS USER MANUAL may result in hazardous radiation exposure.
4. OPERATION
This laser product is not designed for continual use. Make sure there are regular breaks during operation to
maximize the life of your laser. Always disconnect the JAM Pack™ Gold products from power when not in use.
Fog Machine
Wired Remote
Trigger the fogger using the included wired
remote. The LED indicator on the remote indicates when the
fogger has reached the required operating temperature. Press the button on the remote to momentarily
output fog. The length of the wired remote cable is 13 ft (4 m).
UV Strobe
Control Panel
Operation
Button
Function
<UV ON/OFF> Turns the UV blacklight on or off.
<STROBE MODE> Controls the Strobe Mode.
•
Indicator LED will blink when Strobe Mode is on
•Indicator LED will be static on when in Sound-Active Mode
UV Strobe
Combo
Strobe Modes
Function
LED Status
Strobe Modes
Very Fast (20–30 Hz)
Blink
Fast (10–20 Hz)
Blink
Medium (5–10 Hz) Blink
Slow (1–5 Hz)
Blink
Very Slow (0.5–1 Hz)
Blink
Off
Static On
Sound-Active Mode
Static On
Static On
Static On
Laser Control
Switch
Operation
Button
Function
<MUSIC/ON/OFF> Switches between Music (Sound-Active) Mode, on, or off.

Page 20 of 114 JAM Pack™ Gold User Manual Rev. 2
IRC-6
Remote
(Infrared
Remote
Control)
The JAM Pack™ Gold products are compatible with the IRC-6 remote from Chauvet
, with the exception of the
laser and fogger.
The following IRC-6 buttons are used with the JAM Pack™ Gold products:
Turns LED on/off
Selects Sound-Active mode
Start/Stop Strobing (0–20 Hz)
Selects Automatic Mode
Speed of Strobe up or down
Static Red
Static Green
Static Blue
Turns the UV On/Off for UV Strobe
Turns White On/Off for UV Strobe
Red/Green/Blue Green/Blue
Red Blue
Red/Green Red/Blue
Red/Green Red/Blue
Green Red/Green
No Function
From a distance, all products (except for the laser and fogger) will respond to the IRC-6
simultaneously when they are in close proximity to each other. To select an individual product
remotely, the IRC-6 must be aimed only at the desired product.