Cisco 6825 User manual

Cisco IP Phone DECT 6825 Quick Start Guide
- Indicator light (LED)
- Emergency button
- Headset port
- Softkeys, phone control buttons
(Speaker, Menu), Navigation cluster,
call control buttons (Answer/Send,
Power/End)
- Keypad
- Volume and Mute buttons
1
2
3
4
5
6
1
2
3
4
5
6
Your Phone
1. When your handset is idle, enter the phone
number with the keypad.
2. Press Answer/Send .
Place a Call
Press Answer/Send .
Answer a Call
1. From an active call, press Hold.
2. Press Resume to pick the call back up.
Put a Call on Hold
1. From an active call, press Transfer.
2. Enter the coworker’s number and press
Answer/Send .
3. Press Transfer before or after the coworker
answers.
Transfer a Call
1. Press Recents.
2. Press right or left on the Navigation ring
to view different lists.
(All, Missed, Received, Placed)
View Your Recent Calls
Press and hold Power/End until the
screen turns on.
Turn On The Handset
Press and hold Power/End until the
screen turns off.
Turn Off The Handset
Note: When the keypad is locked, you can only dial emergency numbers.
Press and hold Asterisk until the
message “Press and hold *” is displayed
on the screen.
Lock the Handset Keypad
Press and hold Asterisk until the
message “Press and hold *” doesn’t
display on the screen.
Unlock the Handset Keypad

Quick Start Guide
Turn OffTurn On
Please enter you PIN
followed by the # sign.
1. Listen to Messages 8. Personal Options 9. Repeat Menu
Press the voicemail soft button
1. Change PIN
2. Save 3. Erase 9. Repeat
2. Personalize
Greeting
3. Personal
Name 5. Unconditional
Call Forwarding
6. Call Screen
Forwarding
Number
9. Repeat
Menu 0. Exit Menu
Please enter
your new PIN
followed by the
# sign
1. Record
default
greeting
2. Record
greeting for
calls sent to
voice mail
when busy
3. Record
greeting for
call that you do
not answer
Please record
your name
after the beep
When finished
press #
1. Forward all
calls
2. Send calls to
line
Please enter
the forward
destination
number
followed by the
# sign
1. Skip 0. Exit Menu
New Message / Saved message
0. Exit Menu
Please record your greeting after the beep
When finished press #
Call Forwarding
is currently
(Disabled or
Enabled)
- From another phone, dial your phone number.
- Listen for your voicemail greeting and press #.
To access your voicemail from any Phone
Press Messages and follow the voice
prompts.
-- See voicemail map Below.--
Listen to Voice Messages
While the handset is ringing, press Volume
up or down.
Adjust the Ringtone Volume
1. Press Menu .
2. Select Settings.
3. Select Audio Settings > Ring Melody.
4. Scroll through the list of ringtones and
press Play to hear a sample.
5. Press Set and Apply to save a selection.
Change Ringtone
1. Press Menu .
2. Select Settings > Do Not Disturb.
3. highlight your choice.
- Disabled (default)
- Enabled
4. Press Select to save the setting.
Set Do Not Disturb
1. Press Menu .
2. Select Settings > Audio Settings.
3. Highlight Coverage warning.
4. Do one of these actions.
- Press Off to stop the tone.
- Press On to play the tone.
Set the Coverage Warning
1. Press Mute .
2. Press Mute again to turn mute off.
Mute Your Audio
Press Volume up or down to
adjust the handset, headset, or speakerphone
volume when the phone is in use.
Adjust the Volume in a Call
Cisco IP Phone DECT 6825