Cisco SPA300 Series User manual

Configuration of Speed Dial with Soft Keys
on the SPA300 and SPA500 Series IP Phones
Objective
Speed dial is used to quickly call numbers that are often used. This option is used in place of
dialing the entire phone number.
The objective of this document is to guide you on how to configure speed dial on the
SPA300 and SPA500 Series IP Phone.
Applicable Devices
• SPA500 Series IP Phone
• SPA300 Series IP Phone
Software Version
• v7.5.3
Configuration of Speed Dial Settings With Soft Keys
Step 1. Press the Setup button on the IP phone and choose Speed Dial.
Step 2. Use the navigation keys and choose the number of the speed dial you wish to set
between 2-9, and press Edit.
Step 3. Use the DelChar button to delete the last character or Clear button to clear the
telephone number. Use the number keys to input the telephone number.

Step 4. Press OK.
Step 5. Press Save to save the settings, or press Cancel to discard the settings.