Cisco UNIFIED 9971 User manual

QUICK START
FOR ADMINISTRATIVE ASSISTANTS
Cisco Unified IP Phone 9971
1Dial
2Hang up
3Answer
4Divert
5Hold
6Mute
7Conference
8Transfer
9Forward All
10 Call History
11 Directories
12 Shared Lines
13 Voicemail
14 Tips
Note For best results, print on 8.5 x 14”
(legal-sized) paper.
1 Dial
To dial, lift the handset and enter a number. Or:
• Press an unlit session button (right side).
• Press the New Call softkey.
• Press the (unlit) headset button or
speakerphone button .
To dial from a specific line, first press a line button
(left side).
Dial from Call History
As you enter a phone number, matching numbers
display from your call history. Double-tap a
number to dial it, or scroll to the number and press
the Select button in the Navigation pad.
Redial the last number
Press the Redial softkey. To redial from a specific
line, get a dial tone on the line first.
Speed dial
Press a speed-dial button (if available). Or,
enter a speed-dial code while on-hook (no dial
tone), then press the Speed Dial softkey.
Your system administrator can help you set up
speed dials from your User Options web pages.
2 Hang up
To end a call, replace the handset. Or:
• Press the Release button .
• Press the End Call softkey.
• Press the (lit) headset or speakerphone button.
3 Answer
To answer a ringing call , lift the handset. Or:
• Press the flashing amber session button
(right side).
• Press the Answer softkey.
• Press the (unlit) headset button or
speakerphone button .
• Press the Select button in the Navigation pad.
If multiple calls are ringing, scroll to the call that
you want to answer, then do one of the above.
Or press the Answer button (if available) to
answer the oldest ringing call on any line.
Call waiting
If you get a second call while the first call is active,
a second session label displays.
To connect the second call and put the first call on
hold automatically, press the flashing amber
session button (right side).
(If you are not in the All Calls view, you might need
to first press the All Calls button or select the
ringing line before answering the call.)
Multiple lines
Keep these multiple line “basics” in mind:
• Press the All Calls button to view all calls
on all lines (oldest first) and to dial from your
primary line. You might prefer to keep your
phone in the All Calls view most of the time.
• If a line is selected instead of All Calls, your
phone displays activity for (and dials from) the
selected line only.
• To see which line is selected, look for a blue
icon on the line label and the line extension in
the header bar. (All Calls uses your primary
extension.)
• Press a line button or All Calls at any time to
switch views; doing so does not affect calls.
4 Divert
Use Divert to redirect a ringing or active call to
voicemail or to another phone number (set up in
advance by your system administrator). You must
resume a held call before you can use Divert.
Divert affects the highlighted call only. If necessary,
scroll to the call before pressing Divert.
5 Hold
1. Press the Hold button . The hold icon
displays and the session button pulses green.
2. To resume the highlighted call, press the
pulsing green button , the Resume
softkey, or the Select button in the Navigation
pad.

Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: [phone]
800 553-NETS (6387)
Fax: [phone]
Cisco, Cisco Systems, the Cisco logo, and the Cisco Systems logo are registered trademarks or
trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.
All other trademarks mentioned in this document or Website are the property of their respective
owners. The use of the word partner does not imply a partnership relationship between Cisco and any
other company. (0705R)
© 2009 Cisco Systems, Inc. All rights reserved.
Published December 2, 2009, OL-20206-01
6 Mute
Press the Mute button to toggle Mute on and
off. When Mute is on, the Mute button glows red.
7 Conference
1. From a connected call (not on hold), press
the Conference button .
2. Make a new call.
3. Press the Conference button or the Conference
softkey (before or after the party answers).
The conference begins and the phone displays
“Conference” instead of caller ID.
4. Repeat these steps to add more participants.
The conference ends when all participants hang up.
“Conference in” a held call
1. From a connected call (not on hold), press
the Conference button .
2. Press the pulsing green session button for
the held call that you want to add.
Or, if the held call is on another line, press the
Active Calls softkey, choose a call from the list,
and press the Conference softkey.
The participant is added to the call.
The conference ends when all participants hang up.
View & remove conference participants
During a conference, press the Show Details
softkey. To remove a participant from the
conference, highlight a name and press the Remove
softkey.
8 Transfer
1. From a connected call (not on hold), press
the Transfer button .
2. Call the transfer recipient.
3. Wait for the recipient to answer, or skip to
Step 4 while the call is ringing.
4. Press the Transfer button or the Transfer
softkey.
The transfer is complete. Confirmation
displays on your phone screen.
9 Forward All
1. After selecting the desired line (if necessary),
press the Forward All softkey.
2. Enter a phone number, select a number from
Call History, or press the Messages button
(to forward to voicemail).
3. Look for Forward All icon on your screen.
4. To cancel call forwarding, press the
Forward Off softkey.
Your system administrator can help you forward
calls remotely from your User Options web pages.
10 Call History
Press the Applications button and select
Call History.
The last 150 calls display:
• Missed calls
• Placed calls
• Received calls
To dial, double-tap a call, or scroll to a call and
press the Select button in the Navigation pad.
To view call details, press More > Details.
View new missed calls
Press the session button next to the Missed
Calls icon (right side). The Missed Calls icon
displays when you have new (not yet viewed)
missed calls (may include a count of missed calls).
11 Directories
1. Press the Contacts button and select a
directory.
2. Enter search criteria and press Submit.
3. To dial, double-tap a listing.
12 Shared Lines
If you share a line with your boss:
• Either you or your boss can answer a ringing
call on the shared line.
• When your boss has a call on the shared line,
the shared line button on your phone is
solid red and the call displays on your screen.
• When your boss puts a call on hold, the session
button on your phone pulses red. You or
your boss can resume the call.
• If your boss enables the Privacy feature, your
boss’s calls do not display on your screen.
13 Voicemail
New message indicators:
• A solid red light on your handset.
• A stutter dial tone on the line (if enabled).
• A voicemail icon next to the line label and
session button (may include message count).
Listen to messages
Press the Messages button and follow the
voice prompts. Or, select a line and press the
session button next to the voicemail icon .
14 Tips
What are the buttons next to my screen?
• The buttons on the left side of your screen are
line (and feature) buttons. Line buttons change
line views but do not affect active calls.
• The buttons on the right side of your screen are
session buttons. Each call correlates to a
session button. Use session buttons to answer
and resume calls or to view call details.
How do I use the touchscreen?
• To select items, gently press or double-tap (as
needed) using your fingertip or a pencil eraser.
• To scroll down a page, “flick” the last item up.
• To disable the touchscreen for 60 seconds,
press and hold the Select button in the
Navigation pad until confirmation displays.
How do I silence my ringing phone?
Press the left side of the volume button
one time while the phone is ringing.
How do I change my ringtone per line?
1. Select Applications > Preferences >
Ringtone, then select a line and press Edit.
2. Select a ringtone and press Play, then press Set.
What does the Back button do?
Press the Back button to back out of
applications and menus.
Where can I find a complete User Guide?
http://www.cisco.com/en/US/products/ps10453/pr
oducts_user_guide_list.html