Cleveland 24CGA6.2S User manual

Cleveland
™
Project ________________________________
Item __________________________________
Quantity _______________________________
FCSI Section ____________________________
Approval _______________________________
Date __________________________________
1333 East 179 St.,
Cleveland, Ohio, U.S.A. 44110
Tel: [phone]
Fax: [phone]
Web Site: www.ClevelandRange.com
Email: [e-mail]
STEAMCRA T®GENERATOR STYLE
HIGH SPEED CONVECTION STEAMERS
MODEL: 24CGA6.2S
Cleveland Standard Features
I
I54.5” (1385mm) height to top of upper compartment
(lower height makes maintenance easier by lowering the descal-
ing ports)
IIEach compartment has cooking capacity for 3 each
12˝ x 20˝ x 21⁄2˝ Steam Table Pans
I
IDoors hinged left and the controls on the right
I
IHigh efficiency independent Power Burner Steam Generators
50,000 BTU's for each compartment
IIEach steam-cooking compartment is independently operated
and controlled by a separate stainless steel steam generator,
gas valve, Power On/Off Control Levers and a Exclusive,
Remote Probe-Type Water Level Control
IIEasy Access Cleaning Port: Each generator has a deliming port
located on the outside, top of the unit
IIGenerator Cleaning Light for each compartment warns the oper-
ator to delime generator
IIGenerator Steam Standby Mode: Holds generator at a
steaming temperature, allows unit to start cooking quickly
IIEach compartment has one, 60-Minute Electro-Mechanical
Timer with "SureCook" load compensating feature.
Manual Bypass Switch for constant steaming.
IIDurable 14 Gauge, 304 Stainless Steel construction for
compartment door, cooking cavity and steam generator
IIExclusive Gemini Drain/Power Control System:
Manual 1/2 inch "Ball Valve" type drain that controls main power
On/Off and automatically fills generator (located on the control
panel)
IIExclusive Brass Steam Jets distribute steam even throughout
cooking compartment
IIEasy, ront -Access Generator Controls comes with a pullout
drawer for simple servicing of unit
II6˝ Stainless Steel Adjustable Legs with langed eet
IIApprovals: CSA (AGA, CSA) and U.L/NS #4
IICompartment Steam Shut-Off Switch when compartment door is
opened
Options & Accessories
ËElectronic Timer with Compensating eature (ETC)
ËOn/Off Steam Switch Controls, no timer (MC)
Cleveland SteamCraft

GeminiTM Model 24CGA6.2S, 54.5" hi h,
Two compartment steamer. Independent steam enerators
, 50,000
BTU's input per compartment.
"SureCook" electro mechanical timer
with load compensatin feature. Gas valve and water level control
system. Exclusive remote probe-type water level controls.
Exclusive Brass “Steam Jet” distribution system. Two-piece free-
floatin compartment door. 14 au e stainless steel cavity and
door. Pullout service drawer for controls and Gemini Drain/Power
Control System.
ËPropane Gas (PG)
ËDissolve ®Descale Solution, 6 one gallon container w/quart
markings (106174)
ËWater ilters
Short For Specifications
Stea Craft ®Ge ini TM6
SHORT SERIES PRESSURELESS STEAMER,
TWIN, INDEPENDENT GAS-FIRED GENERATORS
SECT. IV PAGE 11
1007

GAS E ECTRIC CO D WATER C EARANCE DRAINAGE
1
1
⁄ 4 ˝ IPS line size,
3
⁄ 4 ˝ connection 120V-1Phase, 60 Hz. 35 psi minimum RIGHT = 12.00˝
NATURAL PROPANE BTU 2 Blowers & Controls 60 psi maximum LE T = 3.00˝
Piping
3
⁄ 4 ˝ N.P.T. Piping
3
⁄ 4 ˝ N.P.T. 50,000 each 150 watts each C2
3
⁄ 8 ˝ dia. NPT for Generator R E AR = 3.00˝
Supply pressure Supply pressure Generator, C1
3
⁄ 8 ˝ dia. NPT for Condenser Allow 6˝ space min.
4.50˝ W.C. Min. 11.00˝ W.C. Min. 100,000 total
** Do not connect to G I from rear and sides
14.00˝ W.C. Max. 14.00˝ W.C. Max.
outlet. See note below. When located near
combustible walls
Manufacturer must be notified if unit will
be used above 2,000 feet
20.63"
(524mm)
33.13"
(842mm)
4.87"
(124mm) 3.00" TYP
(76mm)
7.75"
(197mm)
10.44"
(265mm)
5.00"
(127mm)
4.00"
(102mm)
12.00"
(305mm)
24.00"
(508mm)
12.76"
(324mm)
15.06"
(383mm)
17.43"
(443mm)
37.13"
(943mm)
13.25"
(337mm)
10.00"
(254mm)
20.88"
(530mm)
4.75"
(121mm)
13.88"
(353mm)
20.36"
(517mm)
17.25" TYP
(438mm)
21.50"
(546mm)
59.21"
(1504mm)
30.25"
(768)
5.00"
(127mm)
7.34"
(186mm)
20.50"
(521mm)
2.06"
(52mm)
6.60"
(168mm)
33.13"
(842)
6.13"
(156mm)
24.00"
(610mm)
OPERATING
CLEARANCE
SECONDARY
CLEARANCE
C2
D
C1
(NOT TO SCALE)
SECT. IV PAGE 12
1007
itho in U.S.A.
Each Compartment has
Capacity for:
• Three 21⁄2˝ x 12˝ x 20˝
Steam Table Pans
• Six 1˝ x 12˝ x 20˝
Steam Table Pans
• Two 4˝ x 12˝ x 20˝
Steam Table Pans
C
NOTES:
**DO NOT CONNECT TO G I OUTLET. CLEVELAND RANGE RECOMMENDS GAS IRED 120 VOLT STEAMERS BE HARD WIRED DIRECTLY TO ELECTRICAL SYSTEM.
Cleveland Range reserves right of design improvement or modification, as warranted.
Many regional, state and local codes exist and it is the responsibility of the owner and installer to comply with the codes.
Cleveland Range equipment is built to comply with applicable standards for manufacturers. Included among those approval agencies are UL/NS #4 and CSA (AGA, CGA).
D
WATER QUA ITY
REQUIREMENTS
The quality of water varies
greatly from region to
region. Steam equipment
generators must be
drained daily and chemi-
cally descaled periodically
to ensure proper operation.
To minimize service prob-
lems caused by the accu-
mulation of minerals and
chemicals in water review
the following quality guide-
lines with a local water
treatment specialist. Inlet
water that is beyond these
specified guidelines should
be treated to achieve these
acceptable limits. Total
Dissolved Solids less than
60 ppm, Alkalinity less than
20 ppm, Silica less than 13
ppm, pH factor greater
than 7.5, Chlorine less
than 30 ppm.
Right - 3”, Left - 3”,
Rear - 3”
(12” on control side if
adjoining wall or
equipment is over 30”
high for service access)
Contact factory
for variances to
clearances.
1
1
⁄ 2 ˝ dia.
Do not connect other units to this
drain
Drain must not be located
beneath the steamer itself
Preferred floor drain location
should be a minimum distance
(from the unit) of at least 12” from
the left side, 12" from the right
side, 6” from the front and 6" from
the rear
Do not use PVC pipe