
Cleveland
™
Project ________________________________
Item __________________________________
Quantity_______________________________
FCSI Section ____________________________
Approval _______________________________
Date __________________________________
1333 East 179 St.,
Cleveland, Ohio,U.S.A. 44110
Tel: 1-216-481-4900
Fax: 1-216-481-3782
Web Site:www.ClevelandRange.com
Email: Steam@ClevelandRange.com
GAS KETTLES
MODELS:cKGT-6-T
cKGT-12-T
Cleveland Standard Features
nSelf contained gas tilting kettle is easily installed, only needs a
gas connection and a 115 volt outlet.
nPrecise, consistent temperature control, less than 1°C
temperature variance (ideal for simmering). Operating
temperature range from 145°- 260°F (63°C-127°C).
n“Splash Proof” solid state control panel for temperature,
low water safety,and power “on/off” switch. Accurate L.E.D.
indicators for heat cycle and low water warning.
nKettle and all exterior surfaces are a 304 Stainless Steel
with a #4 finish.
nEnergy efficient (65%), high performance gas-fired
heating system for fast heat up and recovery time:
nSix gallon model with a 34,000 BTU firing rate, and
n22,100 BTU directly applied to the product.
nTwelve gallon model with a 53,000 BTU firing rate, and
n34,450 BTU directly applied to the product.
nSupplied with Gas Pressure Regulator.
nStandard for natural gas operation.
nSelf locking marine type tilting mechanism prevents
accidental tilting. Balanced design makes it easy to tilt. The tilt
handle easily mounts on left or right side. Double safety gas
shut off turns off the gas when the unit is tilted.
nLargepouring lip for easier, faster pouring. Heavy duty
Rolled Rim design provides strong reinforcement, prevents
damages from abuse.
n“Splash Proof” recessed pressure/vacuum gauge.
nSteam jacket permanently filled with treated distilled
water, venting and / or refilling is not required.
n50 PSI Steam Jacket Rating. Safety valve mounted toward
rear of kettle to avoid tampering.
nAutomatic Electronic Spark Ignition System.
nSupplied with cord and plug for 115 volt controls.
nTypical approvals include AGA, CSA, CE, NSF and ASME.
Options & Accessories
pStainless Steel equipment stand with sliding drain drawer and
splash shield (ST-28)
pHot and cold water faucet (DPK), or Cold Water (SPK).
Requires bracket (FBKT)
p316 Stainless Steel Liner (316G)
pCooking Baskets (BS)
pFood Strainers (FS)
Shall be CLEVELAND, gas kettle, Table Type, self-contained, tilting,
Model KGT- _____-T; _____ gallons, natural or LP gas, 2/3 steam jack-
eted, type 304 Stainless Steel and supports. Jacket rated at 50 psi
with Safety Valve. Complete with solid state water level, tempera-
ture, and safety low water power cut off, including LED indicators.
Option lift off cover.
pMeasuring Strips (MS)
pSpray Hose (PRS-K)
pLift OffCover (CL)
pPropane Gas Operation (PG)
pSelf Locking Hand Tilt Mechanism
(HTK - 12 gallons only)
pKettle Markings (KM)
pProtective Control Panel (PCE)
Short Form Specifications
TABLE TOP, GAS-FIRED KETTLES
TILTING, 2⁄3 STEAM JACKETED
“SPLASH PROOF SERIES”
6or 12 GALLONS (23 or 45 LITERS)
SECT.IX PAGE 1
0707