Cleveland KDL-100-F User manual

Cleveland
™
Project ________________________________
Item __________________________________
Quantity _______________________________
FCSI Section ____________________________
Approval _______________________________
Date __________________________________
1333 East 179 St.,
Cleveland, Ohio, U.S.A. 44110
Tel: [phone]
Fax: [phone]
Web Site: www.ClevelandRange.com
Email: [e-mail]
DIRECT STEAM KETTLES
Cleveland Standard Features
nFull Steam Jacketed for faster heating
nLow working height (37.00˝)
nTri-leg supports of 15⁄8˝ O.D., type 304 Stainless Steel tubular
construction, with level adjustable flanged feet for floor bolting
nKettle and all exterior surfaces are Stainless Steel
for ease of cleaning
nSpring-assisted Cover: domed, hinged, one-piece
rotatable (not available on KDL-125-F)
n2˝ diameter Tangent Draw-off Valve, with Drain Strainer
n50 psi Steam Jacket Rating on 30 - 60 gal. models,
35 psi Steam Jacket Rating on 80 - 125 gal. models
n50 psi chrome plated Safety Valve on 30 - 60 gal. models,
35 psi chrome plated Safety Valve on 80 - 125 gal. models
nCondensate Drain Valve with insulated handle
nFaucet Mounting Bracket
nSteam Control Inlet Valves
nTypical approvals include NSF and ASME
Options & Accessories
p316 Stainless Steel Kettle Liner for high acid food
products (316-G)
pLift-off Covers (CL)
pChrome plated Steam Control Kit includes: Steam Traps,
Condensate Strainers, Check Valves, nipples and fittings,
factory assembled and mounted on kettle (SCK1)
pHot and Cold Water Faucet, comes with Swing Spout
p100 psi Pressure Option (PO) (for 125 gallons and larger)
pCooking Baskets and Tri-Basket Supports (BS and TBS)
pMeasuring Strips (MS)
pGallon Markings (KM)
pKettle Accessory Kit (KAK) includes:
pClean-up Brush (CB) p36˝ Kettle Paddle (KP)
p36˝ Kettle Whip (KW) p36˝ Kettle Brush (KB)
pDraw-off Brush (DB) p24 oz. Ladle (KL)
pSwing Funnels for drain (SF)
pDrain Strainers (DS-)
pPressure Reducing Valve for regulating incoming
steam pressure of over 45 psi (PRV-K)
Shall be CLEVELAND, Direct Steam Kettle, Tri-leg, stationary,
Model KDL - _____ -F. Full Steam Jacketed, type 304 Stainless Steel
with
50 psi Steam Jacket Rating on 30 - 60 gallon, 35 psi on 80 gallon
and larger
.Tri-leg supports to be Stainless Steel. Includes spring-
assisted Domed Cover and 2 diameter Tangent Draw-off Valve;
heavy re-enforced Rolled Rim. To operate, connect directly to a
steam source supplying from 5 to 45 psi on 30 and 40 gallon mod-
els; 30 psi on larger models.
pHot and cold, or cold only, Kettle Filler with 60˝
Hose (DKF-K or SKF-K)
pAutomatic Water Cooling* (AWC-1)
*requires Console Mounting Option
pAlternate Mounting Systems - Console Mounting
pAutomatic Water Meter (GMF gallons or LMF liters)
pWater Meter Stand (SWM)
p3" diameter T
angent Draw-Off Valve w/Strainer (TD3)
p3" diameter Butterfly Valve (BV3)
pPre-Rinse Spray Head and Hose (PRSK)
pCorrectional Packages
pHeat Deflector Shield (HS001)
Short Form Specifications
Shown with optional Steam Control Kit
MODELS:cKDL-30-F cKDL-80-F
cKDL-40-F cKDL-100-F
cKDL-60-F cKDL-125-F
TRI-LEG , DIRECT STEAM
STATIONARY, FULL STEAM JACKETED
30, 40, 60, 80, 100, 125 or 150, GALLONS
(110, 150, 225, 300, 375, 475 or 575 LITERS
SECT. XPAGE 19
0707

135 LBS / 63 KG
185 LBS / 84 KG
205 LBS / 93 KG
315 LBS / 143 KG
360 LBS / 164 KG
410 LBS / 186 KG
490 LBS / 223 KG
UNIT SHOWN WITH
2" TANGENT DRAW-OFF
VALVE, SPRING ASSIST
COVER, HOT AND COLD
WATERFAUCET AND
STEAM CONTROL KIT.
CAPACITIES: (in 8 oz. servings,
other sizes may be calculated.)
30 Gallon / 110 liters . . . 480 servings
40 Gallon / 150 liters . . . 640 servings
60 Gallon / 225 liters . . . 960 servings
80 Gallon / 300 liters . . . 1280 servings
100 Gallon / 375 liters . . . 1600 servings
125 Gallon / 475 liters . . . 2000 servings
150 Gallon / 575 liters . . . 2400 servings
(NOTTOSCALE)
SECT
.XP AGE 20
0707
Litho in U.S.A.
NOTES:
Cleveland Range reserves right of design improvement or modification, as warranted.
Many regional, state and local codes exist and it is the responsibility of the owner and installer to comply with the codes.
Installation of backflow preventers, vacuum breakers and other specific coder requirements is the responsibility of the owner and installer.
Cleveland Range equipment is built to comply with applicable standards for manufacturers. Included among those approval agencies are U.L., A.G.A., NSF, ASME/N.Bd., CSA, CGA, ETL and others.
DIMENSIONS
GALS./
LITERS A B1 B2 C1 C2 D E F G H J K L M N 0 P (ID)
30 IN 34.63 38.88 36.13 34.13 31.38 68.00 37.25 28.50 17.38 7.63 19.00 30.5 6.38 26.25 13.00 29.38 29.25
110 mm 867 987 918 867 797 1727 946 724 441 194 483 775 162 667 330 746 743
40 IN 38.13 41.25 38.50 36.50 33.75 71.13 37.13 27.88 15.38 7.88 20.75 33.63 6.38 28.88 14.75 31.75 33.00
150 mm 968 1048 97.8 927 857 1807 943 708 390 200 527 854 162 733 375 806 838
60 IN 40.63 43.13 40.38 38.38 35.63 73.63 37.25 27.50 14.25 8.00 22.00 36.00 6.38 30.75 16.00 33.63 35.50
225 mm 1032 1095 1026 975 905 1870 946 699 362 203 559 914 162 781 406 854 902
80 IN 45.13 46.63 43.50 41.88 38.75 77.50 37.25 26.50 12.00 8.25 24.25 40.25 6.38 34.13 18.25 36.75 40.00
300 mm 1146 1184 1105 1064 984 1969 946 673 305 210 626 1022 162 867 464 933 1016
100 IN 51.00 47.00 43.38 42.00 38.75 82.00 37.00 29.38 9.00 7.88 26.75 45.63 7.25 34.38 20.75 36.75 45.00
375 mm 1295 1194 1102 1067 984 2083 940 746 229 200 679 1159 184 873 527 933 1143
125 IN 53.13 48.88 45.63 44.13 39.25 89.25 39.00 32.75 10.00 8.25 28.25 48.38 7.25 36.88 22.25 37.25 48.00
475 mm 1349 1241 1159 1121 997 2267 991 832 254 210 718 1229 184 937 565 946 1219
150 IN 53.13 48.88 45.63 44.13 39.25 91.25 41.00 32.75 10.00 8.25 28.25 48.38 7.25 36.88 22.25 37.25 48.00
575 mm 1349 1241 1159 1121 997 2318 1041 832 254 210 718 1229 184 937 565 946 1219