Cleveland KDL-40-SH User manual

Cleveland
™
Project ________________________________
Item __________________________________
Quantity _______________________________
FCSI Section ____________________________
Approval _______________________________
Date __________________________________
1333 East 179 St.,
Cleveland, Ohio, U.S.A. 44110
Tel: [phone]
Fax: [phone]
Web Site: www.ClevelandRange.com
Email: [e-mail]
DIRECT STEAM KETTLES
Cleveland Standard Features
n50 psi Steam Jacket Rating and 50 psi chrome plated
Safety Valve
nType 304 Stainless Steel with #4 finish on kettle and
supports
nSpring-assisted, hinged, rotatable, domed Stainless
Steel Cover
n2˝ Tangent Draw-Off Valve with Drain Strainer
nFaucet Mounting Bracket (FBK)
nSteam Control Inlet Valve
nCondensate Drain Valve with insulated handle
nLevel adjustable flanged feet for floor bolting
nTypical approvals include NSF and ASME
Options & Accessories
p316 Stainless Steel Interior Liner (316G)
pFactory installed Steam Control Kit, consisting of a Steam
Trap, Condensate Strainer and Check Valve (SCK1)
p3˝ Tangent Draw-off Valve (TD3)
p3˝ Butterfly Valve (BV3)
pHot & Cold Water Faucet (DPK)
pPressure Reducing Valve for regulating incoming steam
pressure over 45 psi (PRVK)
pKettle Accessory Kit (KAK)
pTri-Basket Strainer Support Systems (TBS)
pKettles Markings (KM)
pMeasuring Strips (MS)
pCorrectional Packages
pHeat Deflector Shield (HS001)
pIsulated Out Jacket (IOJ)
Cleveland Direct Steam Stationary Kettle, Model KDL-( )SH, 32 rim
height (40 gal), 34 rim height (60, 80 gal) fully steam jacketed, 50
psi Steam Jacket Rating, spring-assisted rotable Domed cover,
Faucet Bracket, 2 Tangent Draw-off Valve; heavy re-enforced
Rolled Rim.
Short Form Specifications
MODELS: cKDL-40-SH cKDL-80-SH
cKDL-60-SH
SHORT SERIES™DIRECT STEAM KETTLES
RIM HEIGHTS - 32.1˝ (40 GALLON), 34.8˝ (60 & 80 GALLONS)
STATIONARY, FULL STEAM JACKETED
40, 60 or 80 GALLONS (150, 225 or 300 LITERS)
SECT. XPAGE 23
0707

DIRECT STEAM DRAINAGE WATER CLEARANCE
Steam Supply 1⁄2˝ N.P.T. Condensate 1⁄2˝ diameter RIGHT = 0
* Furnish 3⁄4˝ IPS Return with Strainer Soft Copper LEFT = 0
minimum line and Trap Tubing each REAR = 0
* Operating Pressure When ordered
5-45 psi with a 50 psi with optional
Safety Valve faucet
MODEL NO A B C D E F G H J K L M N
KDL-40SH IN 29.5 19.2 32.1 34.2 41.2 10.7 62.6 26.3 18.5 34.7 15.7 9.7 22.7
mm 749 488 815 869 1046 272 1590 668 470 881 399 246 577
KDL-60SH IN 33 22.6 34.8 36.6 43.6 9.7 68.8 29.8 20.2 38.2 17.5 11.5 23.8
mm 850 574 884 930 1107 246 1748 757 513 970 445 292 605
KDL-80SH IN 35.5 25.3 34.8 38.5 45.5 7.06 71.3 32.3 21.5 40.7 18.7 12.7 21.9
mm 902 643 884 978 1156 179 1811 820 546 1034 475 323 556
(NOT TO SCALE)
SECT
.XP AGE 24
0707
Litho in U.S.A.
NOTES:
Cleveland Range reserves right of design improvement or modification, as warranted.
Many regional, state and local codes exist and it is the responsibility of the owner and installer to comply with the codes.
Installation of backflow preventers, vacuum breakers and other specific coder requirements is the responsibility of the owner and installer.
Cleveland Range equipment is built to comply with applicable standards for manufacturers. Included among those approval agencies are U.L., A.G.A., NSF, ASME/N.Bd., CSA, CGA, ETL and others.
CAPACITIES: (in 8 oz. servings,
other sizes may be calculated.)
40 Gallon / 150 liters . . . 640 servings
60 Gallon / 225 liters . . . 960 servings
80 Gallon / 300 liters . . . 1280 servings