
Cleveland
™
Project ________________________________
Item __________________________________
Quantity_______________________________
FCSI Section ____________________________
Approval _______________________________
Date __________________________________
1333 East 179 St.,
Cleveland, Ohio,U.S.A. 44110
Tel: 1-216-481-4900
Fax: 1-216-481-3782
Web Site:www.ClevelandRange.com
Email: Steam@ClevelandRange.com
MIXER KETTLES
TWIN MIXER KETTLE, DIRECT STEAM
LEG MOUNTED CONSOLE TYPE
TILTING, 2/3 STEAM JACKETED
MODELS:cTMKDL-40-T cTMKDL-100-T
cTMKDL-60-T cTMKDL-125-T
cTMKDL-80-T cTMKDL-150-T
Cleveland Standard Features
n3HorsePower Hydraulic powered Agitator, Scraper and
Bridge Lift
nInfinitely Variable Scraper Speed Control from 0 to 40 rpm
nInfinitely Variable Ratio between Scraper and Agitator:
Agitator rotates from 0 to 8 times the speed of the Scraper
nRemovable (without tools) Nylon Blades scrape the entire
Jacketed Surface
nSafety Device prevents high speed Starts
nMixing stops when Bridge is lifted
nAgitator and Scraper are Bayonet Mounted for easy removal
nFactory installed Chrome-Plated Steam Control Kit
nTilt Mechanism of roller bearings and case hardened
self-locking worm and segment gear
nPower Tilt standard on 150 gallon model
n3" diameter Quick Opening Butterfly Valve
nHot and Cold Water Faucet
nCondensate Valve with Insulated Handle
n50 psi Steam Jacket Rating on 40 - 100 gallon models
n35 psi Steam Jacket Rating on 125 & 150 gallon models
nAll Plumbing, Electrical, Hydraulics enclosed in Stainless
Steel Consoles
nEnclosed, 10 Gauge Stainless Steel hydraulically operated
Mixer Bridge
nKettles and all exterior surface are Stainless Steel
nLarge Pouring Lip
nGallon Markings stamped into Scraper Shaft
nLevel adjustable solid feet (for floor bolting)
nStandard 208-240 volts, 60 Hz, 3 phase, 4 wire
nTypical approvals include NSF and ASME
Options & Accessories
pCovers (MTP)
pProduct Time/Temperature Controls and Indicators
pAutomatic Water Cooling (AWC-2)
pAlternate Draw-Off Valves
pFood Strainer (FS)
pFlow Diverter (FD)
pPan Carrier (PCK)
pSwing Funnels (SF-1 or SF-2)
pAlternate Mounting Systems (wall)
Shall be CLEVELAND Tilting Twin Mixer Kettle Model TMKDL - _____ -T,
Console/Leg mounted, Direct Steam Mixer Kettles with _____ psi Steam
Jacket Ratings.
3H.P. H
ydraulic powered Scraper/Agitator and Bridge Lift.
0-40 rpm Scraper Speed with Variable Scraper to Agitator Ratio from 1-1 to
8-1. Stainless Steel enclosed Mixer Bridge. All Plumbing, Electrical and
Hydraulics enclosed in Consoles. Gallon markings, Bayonet Mounted
Scraper and Agitator. 3" Butterfly Valve. Hot and Cold Water Faucet. Steam
Control Kit.
Safety Device prevents high speed starts; Mixer stops when
Bridge is lifted. Kettles and all exterior surfaces areStainless Steel.
pPressure Reducing Valve (PRV)
pPower Tilt (PT) where not standard
pKettle Accessory Kit (KAK) includes:
pClean-up Brush (CB) p36˝ Kettle Paddle (KP)
p36˝ Kettle Whip (KW) p36˝ Kettle Brush (KB)
pDraw-off Brush (DB) p24 oz. Ladle (KL)
pType 316 Stainless Steel Kettle Interior for high acid food
products (316-12G)
pWater Meter (GMF or LMF) built into system
pAccessories for connection to food pumps
pLeg Extensions (ELTMK)
Short Form Specifications
SECT. XI PAGE 15
0707
Shown with optional Power Tilt