Cleveland
™
Project ________________________________
Item __________________________________
Quantity_______________________________
FCSI Section ____________________________
Approval _______________________________
Date __________________________________
1333 East 179 St.,
Cleveland, Ohio,U.S.A. 44110
Tel: 1-216-481-4900
Fax: 1-216-481-3782
Web Site:www.ClevelandRange.com
Email: Steam@ClevelandRange.com
MIXER KETTLES
MIXER KETTLE, ELECTRIC
LEG MOUNTED, CONSOLE TYPE
2/3 JACKETED, TILTING
MODELS:cMKEL-40-T cMKEL-80-T
cMKEL-60-T cMKEL-100-T
Cleveland Standard Features
nSolid State Temperature Control (±1°F) for perfect
simmering
nSolid State Low Water Safety Control
nSteam jacket filled with treated water, venting and/or refilling is
not required
n50 psi Safety Valve and Steam Jacket Rating
nNo Water Gauge required
nRear mounted Pressure/Vacuum Gauge and Pressure Relief
Valve
nInfinitely variable Scraper Speed Control from 0-40 rpm
nInfinitely Variable Ratio between Scraper And Agitator: Agitator
rotates from 0-8 times the speed of the Scraper
nRemovable (without tools) Nylon Blades scape entire Jacketed
surface
n3Horsepower Hydraulic powered Agitator, Scraper and Bridge
Lift
nSafety device prevents high speed starts
nMixer stop when Bridge is lifted
nAgitator and Scraper are bayonet mounted for easy removal
nTilt mechanism of Roller Bearings and case hardened
Self-Locking worm and segment gear
nHot and Cold Water Faucets
n2" diameter Tangent Draw-Off Valve with Drain Strainer
nAll Plumbing , Electrical and Hydraulics enclosed in Stainless
Steel Consoles
nEnclosed, 10 Gauge Stainless Steel hydraulically operated
Mixer Bridge
nKettle and all exterior surfaces are Stainless Steel
nLevel adjustable feet (flanged for bolting)
nLarge Pouring Lip
nGallon Markings stamped into Scraper Shaft
nStandard 208-240 volts, 60 Hz, 3 phase, 4 wire, high wattage
nTypical approvals include UL., CSA, CE, NSF and ASME
Options & Accessories
pCovers (MTP)
pProduct Time/Temperature Controls and Indicators
pFood Strainer (FS-20)
pFlow Diverter (FD)
pPan Carrier (PCK)
pSwing Funnels (SF-1 or SF-2)
pAlternate Mounting Systems (wall)
pPower Tilt (PT)
pKettle Accessory Kit (KAK) includes:
pClean-up Brush (CB) p36˝ Kettle Paddle (KP)
p36˝ Kettle Whip (KW) p36˝ Kettle Brush (KB)
pDraw-off Brush (DB) p24 oz. Ladle (KL)
pType 316 Stainless Steel Interior for high acid food
products (316-20G)
pWater Meter (GMF or LMF) Wall Mount or on Stand (SWM)
pLeg Extensions
pVoltages (VOS) other than standard
Short Form Specifications
SECT. XI PAGE 5
0707
Shall be CLEVELAND, Model MKEL- _____ -T,console/Leg mounted, Electric
Mixer Kettle with permanently filled Steam Jacket; 50 psi Kettle Jacket Rating
and Safety Valve, High Wattage standard, Solid State Temperature (±1°F)
and Low Water Safety Controls. 3 H.P. Hydraulic powered Scraper/Agitator
and Bridge Lift. 0-40 rpm Scraper Speed with Variable Scraper to Agitator
Ratio from 1-1 to 8-1. Stainless Steel enclosed Mixer Bridge. All Plumbing,
Electrical and Hydraulics enclosed in Consoles. Gallon Markings. Safety
Device prevent high speed starts. Safety Device prevents high speed starts;
Mixer stops when Bridge is lifted. Bayonet Mounted Agitator and Scraper.
2" Tangent Draw-0ff Valve. Hot and Cold Water Faucet. Kettle and all exte-
rior surfaces are Stainless Steel.
Shown with optional Power Tilt
