Cleveland KDP-25-T User manual

Cleveland
™
Project ________________________________
Item __________________________________
Quantity _______________________________
FCSI Section ____________________________
Approval _______________________________
Date __________________________________
1333 East 179 St.,
Cleveland, Ohio, U.S.A. 44110
Tel: [phone]
Fax: [phone]
Web Site: www.ClevelandRange.com
Email: [e-mail]
DIRECT STEAM KETTLES
Cleveland Standard Features
nPedestal is Stainless Steel with 3⁄4˝thick Floor Plate, (level
adjustable for sloping floors), comes with Stainless Steel
Collar for sealing
nKettle and all exterior surfaces are 304 Stainless Steel for
ease of cleaning
nTilting Mechanism with permanently lubricated, self-locking,
Worm Drive of space saving design
nLarge Pouring Lip for chunky products
n50 psi Steam Jacketed Rating
n50 psi chrome plated Safety Valve
nCondensate Drain Valve with insulated handle
nSteam Control Valve mounted on console
nTypical approvals include NSF and ASME
Options & Accessories
pType 316 Stainless Steel Kettle Liner for high acid food
products (316-G)
pLift-off Covers (CL)
pSteam Control Kit includes: Steam Trap, Condensate Strainer,
CheckValve, nipples and fittings (SCK2)
pSpring-assisted Cover: domed, hinged, one-piece rotatable
(CHS-)
pHot and Cold Water Faucet, comes with Swing Spout and
Mounting Bracket (DPK and FBKT)
p2˝ or 3" diameter Tangent Draw-Off Valve (TD2 or TD3)
p 2˝ or 3" diameter T
angent Draw-Off Valve (TD2 or TD3*), *TD3 for
60 gallon only and will raise height of kettle by 5-5/8" (143mm)
p3" diameter Butterfly Valve (BV3)
pCooking Baskets and T
ri-Basket Supports
(BS and TBS)
pPan Carrier (PCK)
pMeasuring Strips (MS)
pGallon Markings (KM)
pKettle Accessory Kit (KAK) includes:
pClean-up Brush (CB) p36˝ Kettle Paddle (KP)
p36˝ Kettle Whip (KW) p36˝ Kettle Brush (KB)
pDraw-off Brush (DB) p24 oz. Ladle (KL)
pFaucet Mounting Bracket (FBKT)
pSwing Funnels for drain (SF)
pPressure Reducing Valve for regulating incoming
steam pressure of over 45 psi (PRV-K)
Shall be CLEVELAND, Direct Steam Kettle, Pedestal mounted,
hand tilting, Model KDP - _____ - T; ____ gallons. 23 Steam Jacketed;
Type 304 Stainless Steel kettle and supports; 50 psi Steam Jacket
Rating; heavy re-enforced Rolled Rim. To operate, connect directly
to a steam source supplying from 5 to 45 psi of steam pressure.
pHot and cold or cold only Kettle Filler with 60˝
Hose (DKF-K or SKF-K)
pAutomatic Water Cooling* (AWC-1)
*requires Console Mounting Option
pAlternate Mounting Systems - Console Mounting
pAutomatic Water Meter (GMF or LMF)
pWater Meter Stand (SWM)
pFood Strainers (FS)
pFlow Diverter (FD)
pDrain Strainers (DS-)
pHeat Deflector Shield (HS001)
ShortForm Specifications
Shown with optional Spring-Assisted Cover,
2" Tangent Draw-Off Valve, and Double Pantry Faucet
MODELS:cKDP-25-T cKDP-60-T
cKDP-40-T
PEDESTAL, DIRECT STEAM
TILTING, 2⁄3 STEAM JACKETED
25, 40 or 60 GALLONS (100, 150 or 225 LITERS)
SECT. XPAGE 13
0707

CAPACITIES: (in 8 oz. servings,
other sizes may be calculated.)
25 Gallon / 100 liters . . . 400 servings
40 Gallon / 150 liters . . . 640 servings
60 Gallon / 225 liters . . . 960 servings
(NOTTOSCALE)
SECT
.XP AGE 14
0707
Litho in U.S.A.
NOTES:
Cleveland Range reserves right of design improvement or modification, as warranted.
Many regional, state and local codes exist and it is the responsibility of the owner and installer to comply with the codes.
Installation of backflow preventers, vacuum breakers and other specific coder requirements is the responsibility of the owner and installer.
Cleveland Range equipment is built to comply with applicable standards for manufacturers. Included among those approval agencies are U.L., A.G.A., NSF, ASME/N.Bd., CSA, CGA, ETL and others.
NOTE: TD3, 3" tangent draw off will
raise height of kettle by 5-5/8" (143mm).
Available on 60 gallon models only.
43.00
1093
43.00
1093
47.00
1194