College Park AXIS User manual

USER GUIDE

The AXIS is a Locking Shoulder Joint that
can also be operated in Free Swing Mode.
In the default set-up, the lock is controlled
via the knob on the shoulder joint itself.
An optional lock release or nudge kit can
be installed in place of the knob to perform
the same action.
The AXIS is locked when the spring is fully
extended and the knob is near the edge of
the shoulder joint. The AXIS is unlocked
when the knob is pressed down and the
spring is fully compressed.
Leaving the knob in this position will allow
the AXIS to operate in “Free Swing Mode”.
In this mode, the prosthesis will move
freely and can be repositioned and locked
where desired. To re-engage the lock,
simply depress the knob completely and
allow the spring to return to the fully
extended position.
USER
GUIDE
The AXIS has a 240° rotation and can
be locked in 25 dierent positions
AXIS in unlocked
(free swing) position
AXIS in locked
position
©2017 College Park Industries, Inc. All rights reserved. College Park and AXIS are
registered trademarks of College Park Industries, Inc.
569 LIT UG SJ 170823
MADE IN THE USA
800.728.7950 |586.294.7950 |college-park.com
EMERGO EUROPE
Prinsessegracht 20, 2514 AP
The Hague, Netherlands
COLLEGE PARK INDUSTRIES, INC
27955 College Park Dr.
Warren, MI 48088 USA
Australian Sponsor
EMERGO AUSTRALIA
Level 20, Tower II
Darling Park
201 Sussex Street
Sydney, NSW 2000
Australia