College Park Breeze Owner's manual

TECHNICAL INSTRUCTIONS
383 INS BE TIS 140815
MADE IN THE USA
PACKAGE CONTENTS TOOLS RECOMMENDED
(1) Breeze™ Foot
(1) Foot Shell
(1) CPI Sock
4mm Hex Key
FootHorn™
©2014 College Park Industries, Inc. All rights reserved. College Park is a registered trademark, with Breeze, IntelliWeave,
EnviroShell and FootHorn as trademarks of College Park Industries, Inc.
WARRANTY INSPECTION AND MAINTENANCE INFORMATION
College Park recommends that you schedule your patients for check-ups according
to the warranty Inspection schedule below.
High patient weight and/or impact level may require more frequent inspections.
We recommend you visually inspect the following applicable parts for excessive
wear and fatigue at each warranty inspection.
▪Composites and Adapters
▪CPI Sock
▪Foot Shell
WARRANTY INSPECTION SCHEDULE FOR BREEZE: ANNUALLY.
Technical Assistance / Emergency Service 24-7-365
College Park’s regular oce hours are Monday thru Friday, 8:30 am – 5:30 pm (EST). After hours, an emer-
gency Technical Service number is available to contact a College Park representative.
FEATURING:
• IntelliWeave™
composite technology
• Water friendly
EnviroShell™
• Integrated pyramid
800.728.7950 |586.294.7950 |college-park.com
EMERGO EUROPE
Molenstraat 15, 2513 BH, The Hague, Netherlands
COLLEGE PARK INDUSTRIES
27955 College Park Dr. Warren, MI 48088 USA

GENERAL INSTRUCTIONS
MOUNTING
Use only high quality endoskeletal components.
ASSEMBLY AND DISASSEMBLY (for sock replacement)
Use the FootHorn to don and do the foot shell. Remove the CPI Sock and replace as needed. Any further
disassembly or modification of components will void the warranty.
STATIC ALIGNMENT
For optimal function have the patient’s weight balanced between the forefoot and heel.
The load line divides the foot at the 1/3 heel lever and 2/3 toe lever.
The Breeze was designed with a 3/8” heel rise. Adjustments will need to be made when
used without shoes.
DYNAMIC ADJUSTMENTS
DESIRED RESULT ALIGNMENT CHANGE
Firmer Toe Response Plantarflex the Breeze or move load line posterior
Softer Toe Response Dorsiflex the Breeze or move load line anterior
Firmer Heel Response Dorsiflex the Breeze or move load line anterior
Softer Heel Response Plantarflex the Breeze or move load line posterior
EXPOSURE TO MOISTURE
To maintain the lifespan of the EnviroShell and CPI sock, always dry foot thoroughly after exposure to
moisture. Rinse and dry if exposed to salt water or chlorinated water.
COSMETIC FINISHING
College Park does not recommend cosmetically finishing the prosthesis if it will be exposed
to moisture.
WARNING
■Under certain circumstances, use in wet environments may increase the risk of slip and fall.
■Remove all shoes and sock and allow to dry in a cool, dry location.
■Do not expose this product to corrosive materials or pH extremes.
■Contaminants such as dirt and the use of lubricants or powder, may eect the function of the CPI Sock
and lead to noise.
■Failure to follow these technical instructions or use of this product outside the scope of its Limited
Warranty may result in injury to the patient or damage to the product.
FOOT COMPONENTS
DRAIN HOLE
This diagram is to help familiarize you with the unique parts of the Breeze. These parts are referenced in the
instructions and used when speaking with a technical service representative.
A thin area is located on the bottom of the EnviroShell™. Create a draining path for water by dong the
footshell and drilling or cutting a 1/4” (6mm) diameter hole in the designated location.
Thin Spot
BOTTOM OF SHELL
3
4
2
1COMPONENTS
1 Integrated Pyramid
2 Housing (Ankle)
3 Foreheel with
IntelliWeaveTM technology
4 CPI Sock (not shown)