Comeup CP-500T User manual

Electric Winch
Model:CP-500T
PN: 155002 380V50Hz
155125 415V50Hz
Introduction
Feature
Lifting capacity: 500 kg at wire rope top layer
Lifting height: 58 m
Lifting speed: 12~18 m/min at 50Hz
Brake: Electromagnetic spring-applied failsafe brake
Control: Pendant switch powers the winch
Unpacking
．Winch assembly 1pc
．Wire rope 7 mm x 60 m 1pc
．Weight hook CHW-0005 1pc
．Low voltage control ass’y LV-320 1pc
．Pendant switch PB-306 w/cord 1.25 mm2
x 3C x 3 m 1pc
Read this manual carefully
You should carefully read and understand this manual before operating it.
Careless winch operation may result in personal injury hazards or property
damage.
Information requesting or parts ordering
Please specify the followings information:
．Winch PN
．Part description
．Replacement part number
．Serial number
．Quantity for each part
Installation
Before using the winch, make sure all electrical components have no
corrosion or damaged; the environment should be clear and dry.
Performance
Wiring Diagram
Winch Model CP-500T
Motor kw x p 1.8 x 4
Recommend
Wire Rope Size (mm) 7
Breaking (kg) 2,700
1st
Layer
Rated Load
(kg) 50Hz 757
2nd
Layer
Rated Load
(kg) 50Hz 671
3rd
Layer
Rated Load
(kg) 50Hz 602
Speed
(m/min) 50Hz 12 Speed (m/min) 50Hz 13.4 Speed (M/min) 50Hz 14.9
Rope-Winding Cumulating
Sum
(
m
)
10 Rope-Winding Cumulating
Sum
(
m
)
22 Rope-Winding Cumulating
Sum
(
m
)
35
4th
Layer
Rated Load
(kg) 50Hz 546
5th
Layer
Rated Load
(kg) 50Hz 500
Speed
(m/min) 50Hz 16.4 Speed (m/min) 50Hz 18
Rope-Winding Cumulating
Sum
(
m
)
50 Rope-Winding Cumulating
Sum
(
m
)
60

Warning
．The winch is not intended to be used in any manner for the movement or
lifting of personnel.
．The lifting capacity shown is based on the top layer of rope on the drum.
．The rope winding on the drum shall remain 5 wraps from the drum.
Parts List
Item No. Description Part No Qty
1 Induction motor kit 380V 880459 1
Induction motor kit 415V 880460
2 Low voltage control ass’y LV-320,380V 881841 1
Low voltage control ass’y LV-320,415V 881840 1
2-1 Remote control , PB-306 881048 1
3 Bridge rectifier CBR-072 880425 1
4 Support bracket 880426 2
5 Drum kit 880427 1
6-1 Tie bar 880428 1
6-2 Tie bar kit 880429 2
6-3 Tie bar kit 880430 2
7 2n
d
shaft kit 880431 1
8 Gear box kit 880432 1
9 1s
t
stage carrier 881301 1
10 1s
t
shaft kit 881302 1
11 Conductor kit 880435 1
12 Brake coil 880436 1
13 Conductor plate A 880438 2
14 Brake disc 880379 2
15 Hex socket 880440 1
16 Conductor plate A kit 880437 1
17 Brake cover 880442 1
18 Wire rope w/weight hook 880443 1
Winch Assembly