Comeup CWG-30750 User manual

Electric Winch
Model: CWG-30750
PN: w/5.5kw x 4P motor
154452 380V50Hz 154985 400V50Hz
152840 415V50Hz 152850 440V50Hz
152855 415V50Hz
Introduction
XFeature
Lifting capacity: 2,200 kg at 50Hz wire rope top layer
Lifting height: 97 m
Lifting speed: 4P: 6.9-12.6 m/min at 50Hz
Brake: Electromagnetic spring-applied failsafe brake
Control: Pendant switch powers the winch
XUnpacking
．Winch assembly 1pc
．Wire rope 16 mm x 100 m w/safety hook 1pc
．Low voltage control ass’y LV-320 1pc
．Pendant switch PB-306 w/cord 1.25 mm2
x 3C x 3 m 1pc
XRead this manual carefully
You should carefully read and understand this manual before operating it.
Careless winch operation may result in personal injury hazards or property
damage.
XInformation requesting or parts ordering
Please specify the followings information:
．Winch PN
．Serial number
．Part description
．Replacement part number
．Quantity for each part

Installation
Before using the winch, make sure all electrical components have no
corrosion or damaged; the environment should be clear and dry.
XPerformance
XWiring Diagram
Warning
．The winch is not intended to be used in any manner for the movement or
lifting of personnel.
．The lifting capacity shown is based on the top layer of rope on the drum.
．The rope winding on the drum shall remain 5 wraps from the drum.
Winch Model CWG-30750
Motor kwxp 5.5 x 4 3.8 x 6
Size(mm) 16
Recommended
Wire Rope Breaking (kg) 11,900
50Hz 4,014 50Hz 3,446 50Hz 3,019Rated Load
(kg) 60Hz 3,211 Rated Load (kg) 60Hz 2,756 Rated Load (Kg) 60Hz 2,415
6.9 8.1 9.2
50Hz 4.5 50Hz 5.3 50Hz 6
8.2 9.7 11
Speed
(m/min) 60Hz 5.4
Speed
(m/min) 60Hz 6.3
Speed
(M/min) 60Hz 7.2
1st
Laye
r
Rope-Winding Cumulating
Sum
(
m
)
11
2nd
Laye
r
Rope-Winding
Cumulatin
g
24
3rd
Laye
r
Rope-Winding
Cumulatin
g
Sum
(
m
)
39
50Hz 2,686 50Hz 2,419 50Hz 2,200Rated Load
(kg) 60Hz 2,148 Rated Load (kg) 60Hz 1,935 Rated Load (kg) 60Hz 1,760
10.4 11.5 12.6
50Hz 6.8 50Hz 7.5 50Hz 8.3
12.4 13.8 15.1
Speed
(m/min) 60Hz 8.1
Speed
(m/min) 60Hz 9
Speed
(m/min) 60Hz 9.9
4th
Laye
r
Rope-Winding Cumulating
Sum (m) 56
5th
Laye
r
Rope-Winding
Cumulating Sum (m) 75
6th
Laye
r
Rope-Winding
Cumulating Sum (m) 100

Parts List
Part No. configurations:
Cycle Voltage kw x p Motor
50 Hz 380 V 5.5 x 4 880637
50 Hz 400 V 5.5 x 4 881448
50 Hz 415 V 5.5 x 4 880638
50 Hz 440 V 5.5 x 4 880636
C
ycle Voltage Brake kit Brake coil LV-320
50 Hz 380 V 881640 880648 881828
50 Hz 400 V 881641 881450 881829
50 Hz 415 V 881642 880649 881830
50 Hz 440 V 881643 880650 881833
Standard Value for brake coil (50Hz):
Voltage 220V 380V 415V 440V
Black & Blue wires 28Ω108Ω117Ω126Ω
Black & Red wires 12Ω48Ω52Ω56Ω
Red & Blue wires 15Ω54Ω62Ω70Ω
Item No. Description Part No. Qty
1 Motor kit As arranged 1
2 Motor support rack kit 880610 1
3 Drum kit 880611 1
4 Connect shaft kit 880612 1
5 Tie bar kit 880613 4
6 Gearbox support rack kit 880614 1
7 3rd stage carrier kit 880616 1
8 2nd stage carrier kit 880618 1
9 2nd & 3rd ring gear kit 880619 1
10 Fix plate kit 880620 1
11 1st stage carrier kit 880622 1
12 1st ring gear kit 880623 1
13 1st shaft kit 880624 1
14 Brake base kit 881638 1
15 Brake kit As arranged 1
15-1 Brake disc 880626 2
15-2 Brake coil As arranged 1
16 Brake rear cover kit 880627 1
17 Wire rope w/hook 880628 1
18 Low voltage control ass’y LV-320 As arranged 1
18-1 Remote control,PB-306 881048 1
19 Base plate kit 881637 1

Winch Assembly