Comeup CWG-10077 User manual

Electric
Winch
Model: CWG-10
077
PN: 152266 220V50Hz
151077 115V60Hz
Introduction
 Feature
Lifting capacity: 300 kg wire rope top layer
Lifting height: 58 m for 6 mm x 60 m rope
Lifting speed: 12-19 m/min at 50Hz；14-21 m/min at 60Hz
Brake: Electromagnetic spring-applied failsafe brake
Control: Pendant switch powers the winch
 Unpacking
．Winch assembly 1pc
．Wire rope 6 mm x 60 m 1pc
．Weight hook CHW-0031 1pc
．Pendant switch w/cord 3.5 mm2
x 5C x 3 m 1pc
 Read this manual carefully
You should carefully read and understand this manual before operating it.
Careless winch operation may result in personal injury hazards or property
damage.
 Information requesting or parts ordering
Please specify the followings information:
．Winch PN
．Serial number
．Part description
．Replacement part number
．Quantity for each part
Installation
Before using the winch, make sure all electrical components have no
corrosion or damaged; the environment should be clear and dry.
 Performance
 Wiring Diagram
Winch Model CWG-10077
Motor kw x p 1.5 x 4
Recommend
Wire Rope
Size(mm) 6
Breaking (kg) 2,010
1st
Layer
Rated Load
(kg)
50Hz 467
2nd
Layer
Rated Load
(kg)
50Hz 420
3rd
Layer
Rated Load
(kg)
50Hz 382
60Hz 60Hz 60Hz
Speed
(m/min)
50Hz 12 Speed
(m/min)
50Hz 13.5
Speed
(m/min)
50Hz 14.9
60Hz 14 60Hz 15.5 60Hz 17.1
Rope-Winding Cumulating
Sum (m)
8.1 Rope-Winding Cumulating
Sum (m)
17.2
Rope-Winding
Cumulating Sum (m)
27.1
4th
Layer
Rated Load
(kg)
50Hz 350
5th
Layer
Rated Load
(kg)
50Hz 323
6th
Layer
Rated Load
(kg)
50Hz 300
60Hz 60Hz 60Hz
Speed
(m/min)
50Hz 16.2
Speed
(m/min)
50Hz 17.6
Speed
(m/min)
50Hz 19
60Hz 18.6 60Hz 20.2 60Hz 21
Rope-Winding Cumulating
Sum (m) 38 Rope-Winding Cumulating Sum (m) 50 Rope-Winding Cumulating Sum (m) 60

Warning
．The winch is not intended to be used in any manner for the movement or
lifting of personnel.
．The lifting capacity shown is based on the top layer of rope on the drum.
．The rope winding on the drum shall remain 5 wraps from the drum.
Parts List
Item No. Description Part No. Qty
1
Induction motor kit
880795
1
Induction motor kit for 115V/60Hz 880794 1
2 Control kit 881324 1
3 Bridge rectifier 880368 1
4 Support bracket 880776 2
5 Drum kit 880777 1
6-1 Tie bar 881863 1
6-2 Tie bar kit 880778 3
7 2
nd
shaft kit 880781 1
8 Gear box kit 880782 1
9 1
st
stage carrier kit 880783 1
10 1
st
shaft kit 880784 1
11 Conductor kit 880785 1
12 Brake coil 880786 1
13 Conductor plate A 880787 2
14 Brake disc 880379 2
15 Hex socket 880790 1
16 Conductor plate A kit 880788 1
17 Brake cover kit 880792 1
18 Wire rope 6 mm X 60 m 881328 1
19 Weight hook, CHW-0031 880384 1
Winch Assembly