Comeup WT-180 User manual

Electric Winch
Model: WT-180
PN : 151800 400V50Hz
151830 380V50Hz
Introduction
XFeature
Lifting capacity: 180 kg wire rope top layer
Lifting height: 98 m
Lifting speed: 17-23 m/min at 50Hz
Brake: Electromagnetic spring-applied failsafe brake
Control: Pendant switch powers the winch
XUnpacking
．Winch assembly 1pc
．Wire rope 5 mm x 100 m 1pc
．Weight hook CHW-0033 1pc
．Low voltage control ass’y LV-320 1pc
．Pendant switch PB-306 w/cord 1.25 mm2
x 3C x 3 m 1pc
XRead this manual carefully
You should carefully read and understand this manual before operating it.
Careless winch operation may result in personal injury hazards or property
damage.
XInformation requesting or parts ordering
Please specify the followings information:
．Winch PN
．Serial number
．Part description
．Replacement part number
．Quantity for each part

Installation
Before using the winch, make sure all electrical components have no
corrosion or damaged; the environment should be clear and dry.
XPerformance
XWiring Diagram
Warning
．The winch is not intended to be used in any manner for the movement or
lifting of personnel.
．The lifting capacity shown is based on the top layer of rope on the drum.
．The rope winding on the drum shall remain 5 wraps from the drum.
Winch Model WT-180
Motor kw x p 0.75 x 4
Size (mm) 5
Recommend
Wire Rope Breaking (kg) 1,230
Rated Load
(kg) 50Hz 252 Rated Load (kg) 50Hz 233.3 Rated Load (kg) 50Hz 217.2
Speed
(m/min) 50Hz 17.0 Speed (m/min) 50Hz 18.3 Speed (m/min) 50Hz 19.7
1st
Layer
Rope-Winding Cumulating
Sum
(
m
)
14.5
2nd
Layer
Rope-Winding
Cumulatin
g
Sum
(
m
)
30.2
3rd
Layer
Rope-Winding
Cumulatin
g
Sum
(
m
)
47.1
Rated Load
(kg) 50Hz 203.2 Rated Load (kg) 50Hz 190.2 Rated Load (kg) 50Hz 180
Speed
(m/min) 50Hz 21.0 Speed (m/min) 50Hz 22.4 Speed (m/min) 50Hz 23
4th
Layer
Rope-Winding Cumulating
Sum (m) 65.1
5th
Layer
Rope-Winding
Cumulating Sum (m) 84.3
6th
Layer
Rope-Winding
Cumulating Sum (m) 100

Parts List
Part No. configurations:
Item No. Description Part No. Qty
1 Motor kit As arranged 1
2 Gear box kit 882116 1
3 Motor coupling 882117 1
4 1st stage carrier 882118 1
5 2nd stage carrier 882119 1
6 Connecting base kit 882120 1
7 Support rack A kit 882121 1
8 Drum kit 882122 1
9 Support rack B kit 882124 1
10 Bearing base kit 882126 1
11 Over-winding bracket kit 882128 1
12 Transmitting plate 882129 2
13 Stopper kit 882130 2
14 Up limit lever shaft kit 882131 1
15 Left returning spring kit 882132 1
16 Right returning spring kit 882133 1
17 Base plate kit 882134 1
18 Limit switch kit 882135 2
19 Low voltage control ass’y LV-320 882136 1
20 Wire rope 882139 1
21 Weight hook CHW-0033 880505 1
Cycle Voltage kw x p Motor
50 Hz 400 / 230 V 0.75 x 4 882113
50 Hz 380 / 230 V 0.75 x 4 882115

Winch Assembly