Comeup CP-500T User manual

Electric Winch
Model:CP-500T
PN: 153691 380V50Hz 931593 380V60Hz
158415 415V50Hz 158300 400V50Hz
Introduction
 Feature
Lifting capacity: 500 kg at wire rope top layer
Lifting height: 58 m
Lifting speed: 12~18 m/min at 50Hz ; 14~22 m/min at 60Hz
Brake: Electromagnetic spring-applied failsafe brake
Control: Pendant switch powers the winch
 Unpacking
．Winch assembly 1pc
．Wire rope 7 mm x 60 m 1pc
．Weight hook CHW-0005 1pc
．Pendant switch PB-331 w/cord 3.5 mm2
x 5C x 6 m 1pc
 Read this manual carefully
You should carefully read and understand this manual before operating it.
Careless winch operation may result in personal injury hazards or property
damage.
 Information requesting or parts ordering
Please specify the followings information:
．Winch PN
．Part description
．Replacement part number
．Serial number
．Quantity for each part
Installation
Before using the winch, make sure all electrical components have no
corrosion or damaged; the environment should be clear and dry.
 Performance
 Wiring Diagram
Winch Model CP-500T
Motor kw x p 1.8 x 4
Recommend
Wire Rope
Size (mm) 7
Breaking (kg) 2,700
1st
Layer
Rated Load
(kg)
50Hz 757
2nd
Layer
Rated Load
(kg)
50Hz 671
3rd
Layer
Rated Load
(kg)
50Hz 602
60Hz 60Hz 60Hz
Speed
(m/min)
50Hz 12 Speed
(m/min)
50Hz 13.4
Speed
(M/min)
50Hz 14.9
60Hz 14 60Hz 16 60Hz 17.8
Rope-Winding Cumulating
Sum (m) 10 Rope-Winding Cumulating Sum (m) 22 Rope-Winding Cumulating
Sum (m) 35
4th
Layer
Rated Load
(kg)
50Hz 546
5th
Layer
Rated Load
(kg)
50Hz 500
60Hz 60Hz
Speed
(m/min)
50Hz 16.4
Speed
(m/min)
50Hz 18
60Hz 19.6 60Hz 22
Rope-Winding Cumulating
Sum (m) 50 Rope-Winding Cumulating Sum (m) 60

Warning
．The winch is not intended to be used in any manner for the movement or
lifting of personnel.
．The lifting capacity shown is based on the top layer of rope on the drum.
．The rope winding on the drum shall remain 5 wraps from the drum.
Parts List
Item No. Description Part No Qty
1
Induction motor kit
380V
880459
1
Induction motor kit
4
15
V
880460
2 Control box 880957 1
3 Bridge rectifier CBR-072 880425 1
4 Support bracket 880426 2
5 Drum kit 880427 1
6-1 Tie bar 880428 1
6-2 Tie bar kit 880429 2
6-3 Tie bar kit 880430 2
7 2
nd
shaft kit 880431 1
8 Gear box kit 880432 1
9 1
st
stage carrier 881301 1
10 1
st
shaft kit 881302 1
11 Conductor kit 880435 1
12 Brake coil 880436 1
13 Conductor plate A 880438 2
14 Brake disc 880379 2
15 Hex socket 880440 1
16 Conductor plate A kit 880437 1
17 Brake cover 880442 1
18 Wire rope w/weight hook 880443 1
19 Remote control , PB-331 881752 1
Winch Assembly