Cooper Lighting AMETRIX ADY071480 User manual

Warning : Before starting any work ensure
that all sources of power are turned off. All
work must meet local/national codes and be
performed by a certified electrician.
Do not
mount fixtures vertically.
Installation Instructions
Vault C Scroll Roundel
These installation instructions are valid with the above Ametrix styles.
1
3
2
Sheet 1 of 3
Large, INDOOR
CR
(Cantilever, Remote ballast)
Visor and Non-Visor
ADY071480 REVA(ECN080352)
Mounting cantile er to structure
J box
(by others)
#8 32 x3/8"
Set screw
Canopy
Mounting plate
1/4" fastener
(by others)
(4x)
Wiring the fixture
Use additional bracing around
J-box to support J-box.
Exploded iew and part call-out
Canopy
#8 32 x3/8"
Set screw
(2x)
Fixture head #10 32 x1
End screw
(2x)
Yoke end cap
Yoke assembly
1/4 20 x3/4"
Hex bolts
(2x)
1. Prior to attaching fixture head to cantilever, remove both
#8 32 x3/8" set screws and allow canopy to slide down
pendant.
2. Feed power wire through wiring holes and using appropriate
fasteners, secure mounting plate to structure. Use additional
bracing around J-box to support J-box.
Attention:
All large fixtures require additional bracing/structure
around J box to support fixture.
1. After pulling wires through wiring holes in mounting plate,
attach appropriate wires and ensure all connections are
properly matched.
2. Push connections into J box and secure canopy using both
#8 32 x3/8" set screws.
3. Refer to supplementary sheet for instructions on aiming and
sealing the fixture.
#8 32 x 3/8"
Set screws
(2x)
Wiring holes
Canopy
Securing fixture to cantile er
1. To remove fixture head from yoke assembly, remove #10 32
x1 end screw from one side.
2. Remove the #6 32 x 1/4" Flat head screw from the inside of the
yoke arm and remove the yoke end cap.
3. With fixture head removed, secure yoke to cantilever using
1/4 20 x 3/4" hex bolts.
4. Run wiring from fixture head, into pendant and out holes in
mounting plate.
#10 32 x1
End screw
Yoke arm
end cap
Fixture head
#6 32 x1/4
Flat head screw
1/4 20 x3/4"
Hex bolts
(2x)

Installation Instructions
Vault w/ visor C Scroll w/ visor Roundel w/ visor
These installation instructions are valid with the above Ametrix styles
Warning : Before starting any work ensure
that all sources of power are turned off. All
work must meet local/national codes and be
performed by a certified electrician. Do not
mount fixtures vertically.
Large, INDOOR
CR
(Cantilever, Remote ballast)
Visor and Non-Visor
Sheet 2 of 3
ADY071480 REVA(ECN080352)
Mounting plate dimensions In[mm]
Top View
Side View
3
127
5"
19.05
4
3
"
88.90
"
127
5"
32
1
2
1
3
88.90
"
9
7.11
"
32
19.05
"
4
11
2"
38.10
Length dependant
on order
1
2"
12.70

Installation Instructions
Vault w/ visor C Scroll w/ visor Roundel w/ visor
These installation instructions are valid with the above Ametrix styles
Warning : Before starting any work ensure
that all sources of power are turned off. All
work must meet local/national codes and be
performed by a certified electrician. Do not
mount fixtures vertically.
Large, INDOOR
CR
(Cantilever, Remote ballast)
Visor and Non-Visor
Sheet 3 of 3
ADY071480 REVA(ECN080352)
Lamping Size Chart
(lamps provided by others)
FIXTURE SIZE
(inches/ mm) WATTAGE
# OF
LAMPS LAMP TYPE LAMP DESCRIPTION
Lamp
(not to scale)
16
1/2
/ 419.1 32 W 1 T4 Compact Flourescent
16
1/2
/ 419.1 42 W 1 T4 Compact Flourescent
16
1/2
/ 419.1 57 W 1 T4 Compact Flourescent
16
1/2
/ 419.1 100 W 1 ED17 Ceramic Metal Halide
16
1/2
/ 419.1 150 W 1 T6 Ceramic Metal Halide
16
1/2
/ 419.1 175 W 1 ED17 Ceramic Metal Halide
22 1/2 /571.5 mm 250 W 1 ET18 Metal Halide
22
1/2
/571.5 mm 400 W 1 ET18 Metal Halide
22
1/2
/571.5 mm 150 W 2 T6 Ceramic Metal Halide
22
1/2
/571.5 mm 32 W 2 T4 Compact Flourescent
22
1/2
/571.5 mm 42 W 2 T4 Compact Flourescent
22
1/2
/571.5 mm 250 W 1 ET18 Metal Halide
22
1/2
/571.5 mm 400 W 1 ET18 Metal Halide
22
1/2
/571.5 mm 150 W 2 T6 Ceramic Metal Halide
22
1/2
/571.5 mm 350 W 1 T3 Halogen(Double Ended)
22
1/2
/571.5 mm 500 W 1 T3 Halogen(Double Ended)
30
1/2
/ 774.7 36 W 1 T5 Twin Tube
30
1/2
/ 774.7 40 W 1 T5 Twin Tube
30
1/2
/ 774.7 50 W 1 T5 Twin Tube
30
1/2
/ 774.7 55 W 1 T5 Twin Tube
30
1/2
/ 774.7 36 W 2 T5 Twin Tube
30
1/2
/ 774.7 40 W 2 T5 Twin Tube
30
1/2
/ 774.7 50 W 2 T5 Twin Tube
30
1/2
/ 774.7 55 W 2 T5 Twin Tube
30
1/2
/ 774.7 250 W 2 ET18 Metal Halide
30
1/2
/ 774.7 400 W 2 ET18 Metal Halide
30
1/2
/ 774.7 900 W 1 T3 Halogen(Double Ended)
30
1/2
/ 774.7 1000 W 1 T3 Halogen(Double Ended)