Copernicus ELS1 User manual

1
Released Oct 11, 2019 - Copernicus Educational Products Inc.
ELS1
Early Learning Station
Please Recycle

Released Oct 11, 2019 - Copernicus Educational Products Inc.
2
ELS1
Early Learning Station
10
Year
Frame
Warranty
Life
Time
Tub
Warranty

Released Oct 11, 2019 - Copernicus Educational Products Inc.
3
Power Strip
Read your power strip electrical specifications. Only plug in devices that are approved for use with this
power strip. Connect the supplied power strip directly to a wall outlet. Do not connect to another
power strip or use an extension cord. Unplug when not in use. Do not leave this product plugged in
for more than 72 consecutive hours. Turn off power strip before unplugging.
Please read the warnings below for important safety information regarding your product. Failure to
read these warnings or to follow the instructions below could result in personal injury or damage to
your product that could void your warranty.
Small
Parts
In its unassembled state, this product contains parts that can be hazardous to small children. This
product should be assembled by an adult.
Adult
Supervision
This product is to be used under the supervision of an adult.
This product is intended for indoor use only. To reduce the risk of fire or electric shock, do not expose
this product to rain or moisture. The internal components are not sealed from the environment.
Indoor Use
Only
Specifications
Electronic
Equipment
Read the electrical specifications of any electronic equipment you are using with your Copernicus
products. Failure to read these specifications and follow their instructions could result in damage to your
equipment or personal injury.
Cable Trip
Hazard
Ensure that any cables extending across the floor to your product are properly bundled and marked to
avoid tripping or falling which may lead to personal injury.
Do not install or use the electrical components of this unit during a lightning storm.
Electrical Shock
Climb Hazard
Do not climb on, hang from or suspend objects from any components of your product unless otherwise
specified.
Warning! Hazard Risks!

Released Oct 11, 2019 - Copernicus Educational Products Inc.
4
Before beginning, you should have:
Contents Box-1 Hardware ( actual size)
Whiteboard Frame
(with lines)
1x
Whiteboard Frame
(without lines)
1x
A
M6 x 19mm Bolt
(43219)
8x
B
M6 Lock Washer
(43273)
6x
C
M6 Nylon Washer
4x
In Box 1
Tub Rack
1x
Additional Hardware ( not to scale)
Contents Box-2
Open Tub
(CC4068)
2x
Safety Cap™ Premium Book Ledge
(PABL-ELS)
1x
Allen Key 4mm
(43281)
2x
Knob
2x
Frame Bracket
2x
10 lbs Weight Limit
Roll Up Felt Surface
1x
2” Twin Wheel
Locking Caster
(410011)
4x
Chart Loop Hook
(310171)
2x
Chart “S” Hook
(31018)
2x
ELS1
Early Learning Station

Released Oct 11, 2019 - Copernicus Educational Products Inc.
5
!
Watch for These Helpful Symbols
This symbol denotes a 2-Person Task. For safety, please ensure that there are the
suggested number of people working on steps displaying this symbol.
Watch for this symbol throughout the Assembly Guide. Wherever you see it, pay close
attention. The symbol denotes a step needing extra attention to ensure it is done
correctly.
The star symbol highlights an advisory note.
Before You Begin
Lay out and identify all of the included parts.
The hardware has been packed according to step.
Read the assembly guide over once to familiarize yourself with them.
Please note that in its unassembled state, this product contains parts that can be
hazardous to small children. This product should be assembled by an adult.
2-Person Task
Please note, star washers
are critical components for
electrical safety. Star
washersmust be included
and fasteners fully tightened
to prevent the risk of electric
shock..
As You Assemble the Unit
Follow the steps in sequence.
Before beginning each step, find the part(s) that you need
for that step.
Pay attention to the labels on the parts; they are there to
help direct you at certain stages.
The title of each step states what you
will be doing. Review the text and the
pictures as you build the unit.
Tips for Assembly

Released Oct 11, 2019 - Copernicus Educational Products Inc.
6
You will need: (Not to Scale)
1
Install Casters
2”Twin Wheel Locking Caster
4x
Whiteboard Frame
(with lines)
1x
Whiteboard Frame
(without lines)
1x
Place Whiteboard Frames upside down to install casters more easily.
Tap them in with a mallet if necessary.

Released Oct 11, 2019 - Copernicus Educational Products Inc.
7
Attach BOTH Frame Brackets
Place both Whiteboard Frames on their sides
to install Frame Brackets. Repeat step for other side.
A
B A A
B B
2x
Actual Size:
A
2x
C
4x
You will need: (Not to Scale)
Knob
2x
Tub Rack
1x
Install Tub Rack
Install knob
on same side
as Triangle Part
Knobs
Knob A C C
2
Actual Size:
You will need: (Not to Scale)
A
6x
B
6x
Frame Bracket
2x
3
Triangle
Part

Released Oct 11, 2019 - Copernicus Educational Products Inc.
8
Actual Size:
4
You will need: (Not to Scale)
Install Safety Cap™ Book Ledge
Safety Cap™ Premium Book Ledge
1x
Please note the spring
tension is designed to
discourage children
from unhooking it
Actual Size:
5
You will need: (Not to Scale)
Install All Chart Hooks
Chart Look Hook
2x
Chart “S” Hook
2x
Snap
Place empty hardware bag over frame
to prevent scratching

Released Oct 11, 2019 - Copernicus Educational Products Inc.
9
Secure Roll Up Felt Surface On Whiteboard
Secure using cords at each corner.
7
Actual Size:
You will need: (Not to Scale)
Roll Up Felt Surface
1x
6
Actual Size:
You will need: (Not to Scale)
10 lbs Weight Limit
Open Tub
2x
Install Tubs On Tub Rack