Corsair 460X User manual

CRYSTAL SERIES 460X
Case Specifications
Length......................................................................................................mm
Width .......................................................................................................mm
Height ......................................................................................................mm
MaximumGPUlength .......................................................................mm
MaximumCPUcoolerheight .........................................................mm
MaximumPSUlength........................................................................mm
Fanlocations
Front .........................................................................xxmm
Top....................................................................................xmm
Rear...................................................................................................mm
Radiatorcompatibility
Front ............................................................................... mmmm
Top.....................................................................................................mm
Rear...................................................................................................mm
464mm
440mm220mm
INSTALLATION GUIDE

CRYSTAL SERIES 460X
Case Features
Accessory Kit Contents
Tempered glass side panel
Solid side panel
Removable, modular PSU and 3.5” Drive Covers
Modular HDD Cage & Sleds
Rear SSD mounts
AF140L front intake fan
AF120L rear exhaust fan
CPU backplate cutout, and built-in cable routing cutouts with grommets
Dust filters
Top cover
Front I/O Panel (x2 USB 3.0, Headphone, Mic, Power, and Reset)
(x7) Expansion slots
Removable tempered glass front fascia
(x3) SP120 RGB LED fans (460X - RGB)
A
B
C
D
E
F
G
H
I
J
K
L
M
N
ax6
Cable ties
gx1
Motherboard
stando
ex16
Short fan screws
dx4
SSD pan head
screws
fx4
Long fan screws
b
MBD/HDD screws
x16 cx16
SSD/ODD screws
HA BEG J K N
C D F IL M

CRYSTAL SERIES 460X
4. Installing SSDs
3. Installing HDDs
2. Installing the Motherboard
1. Removing the Side Panels
Remove the thumb screws
and pull the side panel o.
Snap your motherboard’s I/O
shield into the cutout.
Align the motherboard with
the standoffs in the case.
Secure with the included
screws. b
Step 1 – Place the drive into
the 3.5” drive tray.
Step 2 – Slide the drive
and rail assembly into the
HDD cage from behind the
motherboard as shown.
400C_400Q STEP 3
400C_400Q STEP 3
Step 2
Step 1
Slide the 2.5” drive into the
tray until it snaps into place.
400C_400Q Step 4

CRYSTAL SERIES 460X
8. Installing the Front I/O Connectors
7. Removing the Front Fascia
6. Installing PCI-E/PCI Card(s)
5. Installing the Power Supply
1. Remove thumbscrews and
corresponding slot covers.
2. Install the expansion
card and secure with
thumbscrews.
Unscrew the front panel, then
gently but firmly pull away from
the chassis.
Install the PSU into the
lower chamber of the case,
and secure with four screws
from behind.
400C_400Q STEP 6
1
400C_400Q STEP 6
2
USB 3.0
HD AUDIO RESET SW POWER LED +
POWER LED –POWER SW HDD LED
See your motherboard’s
manual for front panel header
locations and pin-outs.

CRYSTAL SERIES 460X
13
Frequently Asked Questions9. Using RGB Fan Controller (460X - RGB)
1. Does the polarity matter with the I/O panel’s power
and reset header?
No, only the LED headers.
2. Where can I mount a fan?
Fan Mount Locations
Front 3x120mm, 2x140mm
Top 2x140mm/120mm
Rear 120mm
Bottom x
Side x
Mid x
See included RGB Fan controller
Quick Start Guide for detailed instructions.