Costway TY327975 User manual

Battery Powered Ride On Car
TY327975

Please read all instructions carefully and keep it for future reference.
Warnings:
Attention! Use it with protective equipment.
Attention! Not use it in the traffic.
Attention! The product is not suitable for the children under 3 years.
General Warnings:
The product must be installed and used under the supervision of an adult.
Read through each step carefully and follow the proper order.
Remove all packaging, separate and count all parts and hardware.
Please ensure that all parts are correctly installed, incorrect installation can lead to a danger.
We recommend that, where possible, all items are assembled near to the area in which they
will be placed in use, to avoid moving the product unnecessarily once assembled.
Ensure a secure surface during construction, und place the product always on a flat, steady
and stable surface.
Please use the product carefully, as the product requires great skill, avoid accidents by the
user or others, by fall or collision.
Please wear suitable protective equipment during use, e.g. protective helmet, gloves, knee
pads, elbow pads etc.
OWNERS MANUAL
Please keep this manual for future reference as it contains important information.
Before first time use, charge the battery for at least 8-12 hours.
Read and understand this entire manual before using!
with Assembly Instructions
• Suitable for 3+ Years.
• Maximum user weight: 110 lbs.
Ride On Toy
Mercedes-Benz X-Class
02 03

AAbout Your New Vehicle │ 1
●Non-rechargeable batteries are not to be recharged.
●If removable rechargeable batteries are used, the are only to be charged under adult supervision.
●Remove rechargeable batteries from the product before charging.
●Do not mix old and new batteries. Do not mix different types of batteries: alkaline, standard
(carbon-zinc) or rechargeable (nickel-cadmium).
●Insert batteries as indicated inside the battery compartment, anode to anode, cathode to cathode.
●Remove batteries during long periods of non-use. Always remove exhausted batteries from the
product. Battery leakage and corrosion can damage this product. Dispose of batteries safely.
●Never short circuit the battery terminals.
BATTERY INFORMATION
“Mercedes-Benz”, , and the design of the enclosed
product are subject to intellectual property protection owned by
Daimler AG. They are used by Pinghu City Xiao Ming Xing
Children's Products CO.,LTD
12V7AH X1
12V700-1000mA
550-12000
12V7AH X2
12V1500mA
550-10000
12V10AH X1
12V900-1000mA
550-10000
Specification
Suitable age:
Charge time:
Load capacity:
Size of car:
Speed:
3+ Years
8-12 hours
Under 110 lbs.
55.5” x 30.5” x 25.5”
2-8 km/h
2WD 4WD 4WD
Battery
Charger
input
Motor
Depend on local voltage
M5X45 machine screw
22
B
1
2
2
6
4
4
2
1
12
2
2
1
1
1
1
1
1
1
1
1
1
1
4
4
6
4
4
0
1
12
2
2
1
1
1
1
1
1
1
1
1
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
NO. PART NAME
Q’TY (PCS) REMARK
Vehicle body
Gear box
Driving wheel
Φ12 washer
Lock nut
Wheel cover
Front wheel
Seat
Φ5x12 screw
Door
Wing mirror
Steering wheel
Φ5 nut
Trailer board
Rear support
Roll bar
Trailer gate
Windshield
Charger
Remote controller
Parts List │ 2
4WD 2WD
Screwdriver (not included)Spanner
• Assembly tools required:
04 05

20
21
1
19
2
8
15
916
17
18
9
910
11
3
7
4
4
4
13
14
5
5
6
6
12
C
HINT: Some parts shown are assembled on both sides of vehicle
Parts Diagram │ 3 D
WARNING:
• CHOKING HAZARD! Not suitable for children under 36 months.
• ADULT ASSEMBLY REQUIRED.
PREVENT INJURIES AND DEATHS:
• NEVER LEAVE CHILD UNATTENDED.ADULT DIRECT SUPERVISION IS REQUIRED. Always keep
child in view when child is in vehicle.
Rules for Safe Riding
• This vehicle has adjustable play seat belts. Please instruct children how to tie the safety belt before
using, guarantee the security.
• Keep Children within Safe Riding Areas:
- Never use in roadway, near motor vehicles, on lawn space, on or near steep inclines or steps,
swimming pools or other bodies of water;
• Use the toy only on flat surfaces. Such as inside your house, garden or playground.
• Never use in the dark. A child could encounter unexpected obstacles and have an accident.
Operate the vehicle only in the daytime or a well-lit area.
• It is prohibited to change the circuit or add other electric parts
• Inspect wires and connections of the vehicle periodically.
• Do not let any child touch the wheels or be near them when the car is moving .
• This toy should be used with caution since skill is required to avoid falls or collisions causing
injury to the user or third parties.
• Protective equipment should be worn.
• Never use in roadways, near cars, on or near steep inclines or steps, swimming pools or
other bodies of water.
• Always wear shoes, always sit on the seat.
• Not to be used in traffic.
• This toy is unsuitable for children under 36 months due to its maximum speed; Maximum user
weight is 110 lbs.
• This toy has no brake.
Safety │ 4
06 07

6
8
9
10
7
1
2
345
6-A
E
Turn the vehicle body upside down.
1. Side the gear box onto the rear axle (“R” labeled gear box should be fit the “Right” side of
vehicle, and “L” labeled gear box should be fit the “Left” side of vehicle). and keep the
connector on the gear box pass through the hole on the vehicle.
2. Slide a driving wheel onto the rear axle.
3. Slide a Φ12 washer onto the rear axle.
4. Tighten a lock nut to the end of the rear axle with a spanner.
Repeat for the other rear wheel.
Hint: An extra spanner has been provided to hold the lock nut
on the other side of the rear alxe while tightening the
lock nut on the other side.
5. “Snap” the hubcap to the driving wheel.
Remove all the parts from the front axle.
FRONT WHEEL ASSEMBLY
1. Slide a Φ12 washer onto the front axle.
Slide a gear box onto the front axle (Please fit the motor hood to the motor,
refer to page 10). Plug the connector on the motor into connector on the vehicle
body (6-A)
2. Slide a driving wheel onto the front axle.
3. Slide a Φ12 washer onto the front axle.
4. Tighten a lock nut to the end of the front axle with a spanner.
5. “Snap” the hubcap to the driving wheel.
Repeat for the other front wheel.
Attach the Wheels │ 5
Rear bottom view
Front bottom view
4WD
2WD
2
4
1
3
E
Attach the Trailer Board, Rear Support & Roll Bar │ 6
Turn the vehicle body over.
1. Fit the tabs on the trailer board into
the slots on the rear of the vehicle.
2. Insert the two Φ4x12 screws and
tighten with a screwdriver.
3. Fit the tabs on the rear support into
the slots on the vehicle. push until
your hear it “click” into place.
4. Fit the tabs on the roll bar into the
slots on the vehicle, push until your
hear it “click” into place.
Rear view
08 09

1
3
5
4
2
EAttach the Steering Wheel & Windshield │ 7
1. Plug the sound unit connector on the steering wheel into the connector on the
vehicle body.
2. Fit the steering wheel to the end of the steering column.
3. Line up the holes on the steering wheel with the holes on the steering column,
insert the M5x40 machine screw.
4. Fasten a nut on the opposite end of the screw with a screwdriver.
5. Insert the tabs on the windshield into the slots on the vehicle, push until you
hear ”click” into place.
3
2
1
4
Side view
Side view Rear view
Door inside view
E
Attach the Wing Mirror, trailer gate & doors │ 8
1. Fit the door to side of vehicle.
2. Insert the two Φ4x12 screws pass through the door and into the vehicle body,
tighten them with a screwdriver. Repeat for the other door.
3. Fit the tabs on the wing mirror into hole on door, push until you hear it “click”
into place. Repeat for the other wing mirror.
4. Fit the rear gate to the rear of vehicle.
Repeat for the other door.
10 11

33
4
E
1
Top view
Vehicle
connector
Motor
connector
Connect the Power Supply & Attach the Seat │ 9
2
Vehicle connector
Battery connector
1. Plug the vehicle connectors into the motor connectors.
2. Plug the battery connector into the vehicle connector.
3. Insert the tabs on the back of seat into the slots on trailer board.
4. Insert two Φ4x12 screws and tighten.
1
1
2
3
F
Rear bottom view
1. Rotate the pull handle out. The pull handle is below the trailer gate.
2. You may move the ride-on by pulling.
Before using the pull handle, operates
the vehicle to 2WD mode. Avoid to
damage the front motors.
4WD
4WD
This step only for the front gear boxes of type.
Using the Pull Handle & Assemble the Motor Hood │ 10
12 13

1
2 3
4
B
A
I
K
L
J
C
D
E
FG
H
G
Always stop vehicle
when changing the
speed or direction to
avoid damage the
gears and motor.
IMPORTANT!
Use Your New Vehicle │ 11
1. Foot pedal: ●To move the vehicle, press the pedal down.
●To brake or slow down, release pressure from the pedal.
2. Horn button: Press for horn playing
3. Next / Increase volume button:
Long press for + volume.
4. 4WD TYPE ONLY-2WD/4WD switch:
change the ride-on drive in 2WD and 4WD mode.
A. Power Switch: Press it to power on the vehicle,
long press it for 3 seconds to power off.
B. Forward/Reverse switch:
Changes the direction that vehicle moves from forward to
reverse. The vehicle equipped with 3 speeds in forward:
high speed / normal speed / low speed .
C. Display screen: It displays the power level of the battery when the vehicle stops. When the numerical
value is less than 12, recharge the battery please.
D: Lights button: Turns the lights on and off.
E: Play / Pause
F. Previous / decrease volume
G. Next / Increase volume
H. Rocking mode
I. USB interface: Allow the audio from your portable device to be played through the vehicle speakers.
MP3 format ONLY.
J. 3.5mm AUX input: Allow the audio from your portable music player or phone to be played through the
vehicle speakers. MP3 format ONLY.
K. Music mode
L. Change the audio input from the FM radio, USB, AUX input or Bluetooth
Under the FM radio mode, long press button E (play/pause) for radio searching. When your phone
connecoted to the product with bluetooth, the product could answer the call through the microphone inside
the dash.
Police car only: The button "L" has one more function, it also controls the front
warning light, and plays the siren sound at the same time.
H
Use the Remote Controller │ 12
• Leave the remote controller idling for about 10 seconds, it will shut down
automatically.
• Rebuild connection when you replace the batteries of the remote controller.
Attach the batteries of controller
Lift the battery compartment door on the back of the controller and insert two
AAA(LR03) batteries.
HINT: Batteries not included. Refer to the Battery Information on the page 1.
NOTE:
1. Build connection
Long press the forward and reverse buttons for 3 seconds, and the speed
indicator flashes. Then power on the vehicle, the speed indicator goes to long
bright, means the connection successful. If the speed indicator no response,
means the connection failed. Replace the batteries and retry.
2. Brake button
Press the button to stop the vehicle, press it again to release the brake.
3. Speed select button
The switch operates the vehicle to move in low, normal or high speed.
HINT: This switch won’t work while your vehicle moves reverse.
Speed select button Speed indicator
Forward button
Reverse button
Left button
Brake button
Right button
14 15

K
Troubleshooting Guide │ 14
.
Problem Possible Cause Solution
Vehicle does not run
Vehicle does not run
very long
Vehicle runs sluggishly
Vehicle needs a push
to go forward
Difficult shifting from
forward to reverse or
vice-versa
Loud grinding or clicking
noises coming from
motor or gear box
Battery low on power
Thermal fuse has tripped
Battery connector or wires
are loose
Battery is dead
Electrical system is damaged
Motor is damaged
Battery is under charged
Battery is old
Battery is old
Vehicle is overload
Vehicle is being used in harsh
conditions
Poor contact of wires or
Connectors
“Dead Spot” on motor
Motor or gears are damaged
Battery low on power
Recharge battery.
Reset fuse, see <Fuse>
Check that the battery connectors are firmly plugged
into each other. If wires are loose around the motor
contact your distributor please.
Check that the battery connectors are firmly plugged
into each other. If wires are loose around the motor,
contact your distributor please.
A dead spot means the electric power is not being
delivered to the terminal connection and the vehicle
needs repair. Contact your distributor please.
Attempting to shift while the
vehicle is in motion
Completely stop the vehicle and shift, see <Use Your
New Vehicle>
Check that the battery connectors are firmly plugged
into each other when recharging
Replace battery, contact your distributor please.
Replace battery, contact your distributor please.
Replace battery, contact your distributor please.
Reduce weight on vehicle. Maximum user weight is
110 lbs.
Avoid using vehicle in harsh conditions ,see <Safety>.
Recharge battery, contact your distributor please.
Contact your distributor please.
Contact your distributor please.
Contact your distributor please.
Contact your distributor please.
Battery will not
recharge
Charger feels warm
when recharging
Battery connector or adapter
connector is loose
Charger not plugged in
Charger is not working
This is normal and not a
cause for concern
Check that the battery connectors are firmly plugged
into each other.
Check that the battery charger is plugged into a
working wall outlet.
Completely read through this manual and the troubleshooting guide table before calling. If you
still need help resolving the problem Contact your distributor please.
I
J
Charging │ 13
• The POWER SWITCH must be turned in OFF
position when charging.
• After each use or once a month minimum
recharge time as 8 to 12 hours, less than 20
hours at most.
• When the vehicle begins to run slowly,
recharge the battery.
1. Plug the charger port into the input socket.
(on the dash)
2. Plug the charger plug into a wall outlet. The
battery will begin charging.
Maintaining
• It is parents' responsibility to check main parts of the toy before using, Must regularly
examine for potential hazard, such as the battery, charge,cable or cord, plug, screws are
fastening enclosure of other parts and that in the event of such damage, the toy must
not be used until that damage had been properly removed.
• Make sure the plastic parts of the vehicle are not cracked or broken.
• Occasionally use a lightweight oil to lubricate moving parts such as wheels.
• Park the vehicle indoors or cover it with a tarp to protect it from wet weather.
• Keep the vehicle away from sources of heat, such as stoves and heaters. Plastic parts
may melt.
• Recharge the battery after each use. Only an adult can handle the battery. Recharge the
battery at least once a month when the vehicle Raider is not being used.
• Do not wash the vehicle with a hose. Do not wash the vehicle with soap and water. Do
not drive the vehicle in rainy or snowy weather. Water will damage the motor, electric
system and battery.
• Clean the vehicle with a soft, dry cloth. To restore shine to plastic parts, use a non-wax
furniture polish. Do not use car wax. Do not use abrasive cleaners.
• Do not drive the vehicle in loose dirt, sand or fine gravel which could damage the moving
parts, motors or the electric system.
• When not using, all the electrical source should be turn off. Turn off the power switch and
disconnect the battery connection.
WARNING!
This product with Charging Protection: when charging, all functions will be cut
off! Only an adult can charge and recharge the battery!
16 17

Our products are suitable for ASTM F963; GB6675; EN71 and EN62115 standard.
Disposal Of Battery
● Your sealed lead-acid battery must be recycled or disposed of in an environ-
mentally sound manner.
● Do not dispose of your lead-acid battery in a fire. The battery may explode or
leak.
● Do not dispose of a lead-acid battery in your regular, household trash. The
incineration, land filling or mixing of sealed lead-acid batteries with household
trash is prohibited by law.
Welcome to visit our website and purchase our quality products!
We would like to extend our hearelt thanks to
all of our customers for taking me to assemble
this product and giving us valuable feedbacks.
With your inspiring rating, COSTWAY will be more consistent to offer you
EASY SHOPPING EXPERIENCE, GOOD PRODUCTS and EFFICIENT SERVICE!
US office: Fontana, California
UK office: Ipswich
www.costway.com
Reward Points
Exclusive Customer Service
Personalized Recommendaons
Permanent Shopping Cart
Order History
www.costway.com
18 19