Courtyard Creations KUS891W-WM User manual

Note:
The labels marked “L” and “R” on the arms (#3 and #4) should
coincide with Figure 1 to ensure proper assembly.
BOLT M6*16
17C33A0706001Y4
ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
PAGE 1 OF 3 COURTYARD CREATIONS INC.
Use the correct bolts as indicated. Do not tighten any of the bolts until is completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings
required.
Keep children away during assembly. This item contains small parts that can be swallowed by children.
Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
SERVICE CENTER TOLL FREE NO.
TEL: [phone]
FAX: [phone]
STOP DON’T RETURN TO STORE!
"
"
"
"
"
Step 1:
Place the right arm (#4) onto a non-abrasive surface, such as a
carpet. At the front of the bench, fasten both the left arm (#3)
and the right arm (#4) to the seat assembly (#2) by using bolts
(#5 and #6) and washers (#8). Keep the bolts loose.
See Figure 1.
KUS891W-WM
FIGURE 1
RIGHT ARM
BOLT M6*40
SEAT ASSEMBLY
BOLT CAP M6
BOLT CAP
BOLT CAP M6
HEX.KEY WRENCH 4MM
HEX.KEY WRENCH 6MM
NUT WRENCH 10&13MM
BACK CUSHION
SEAT CUSHION
LEFT ARM
PARTS LIST
PART
NO.
12
7
6
4
2
1
1
1
2
28
10
11
12
13
14
15
16
17
1
1
1
4
14
6
2
2
3
4
5
6
18000337002
18000337004
18000337006
17KAA0101----Y4
17KAA0201----Y4
17KAB1101----Y4
61K891WX00001BA
61K891WY00001BA
KUS891W-CS01
KUS891W-CS02
KUS891W-CS03
KUS891W-CS04
17C01A0714003Y4
17FA05040301-Y4
BACK ASSEMBLY
MATERIAL
CODE PART Q’TY
Attention:
Make sure that each bolt needed for all steps matches the
corresponding figure to ensure proper assembly.
WASHER d6.5*D13*1.0
BOLT M6*14
17C02A0755131Y4
16 14
6
5
2
3
8
11
12
#5 BOLT M6*16 #6 BOLT M6*14
L
4R
94
18000C23001
PLASTIC NUTS M6*P1.0

STOP DON’T RETURN TO STORE!
PAGE 2 OF 3
FIGURE 2 FIGURE 3
Step 2:
At the rear of the bench, fasten both the left arm (#3) and the
right arm (#4) to the seat assembly (#2) by using bolts (#5)
and washers (#8). Keep the bolts loose. See Figure 2.
FIGURE 4
FIGURE 6
FIGURE 5
5
22
8
8
7
7
10
10
8
8
9
9
3
4
8
11
5
8
11
E
3
2
8
8
7
1
0
9
1
1
Step 3:
Fasten the back assembly (#1) to the seat assembly (#2) by
using bolts (#7) washers (#8) and plastic nuts (#9). Make sure
that all of the bolts have been tightened completely and cover
them with bolt caps (#10, #11 and #12). See Figure 3.
Step 4:
Rotate the back assembly (#1) to desired position.
See Figure 4.
Step 5:
Place the cushions (#16 and #17) onto the bench. Secure the
cushions to the bench by using the plastic clamps.
See Figure 5.
Step 6:
Two hiden side tables under each arm can stretch out for side
table usage. Weight limit of this side table is 4kgs (8.8Ibs).
Please keep load within limit to avoid damage or injury.
16
11
#5 BOLT M6*16
40
16
16
17 17
#7 BOLT M6*40
GURE
6

Cleaning and Maintenance

bleach, acid, or other solvents on the frame or fabric parts.
Cushions may be washed on the surface only by using mild soap and water or a commercial foaming
upholstery cleaner if necessary. If washed, rinse well, and hang to dry. Do not machine wash or dry.
We recommend the use of furniture covers when not in use.
on a regular basis to ensure the proper performance and safety of
your bench.

area during off season periods.
The store where you made your purchase
does not stock parts for this item.
If you need parts,
whether they are missing or damaged,
STOP!
Missing A Part?
No Need To Go Back To
The Store
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
Call Toll Free:
TEL: [phone]
FAX: [phone]
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU
HAVE ALL OF THE PARTS LISTED.
IF YOU DO NOT LOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTS THAT MAY HAVE BECOME
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCE ANY DIFFICULTY DURING ASSEMBLY OR IF ANY
PARTS ARE MISSING OR DAMAGED, CALL THE HELP LINE AT
1-877-539-7436 BEFORE RETURNING THIS ITEM TO THE STORE.
PROVIDE THE FOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THE PRODUCT.
2-PART NUMBER AND MATERIAL CODE OF THE PART FROM THE PARTS
LIST.
MOST PROBLEMS CAN BE RESOLVED WITHOUT RETURNING THIS
PRODUCT TO THE RETAILER.
STOP DON’T RETURN TO STORE!
PAGE 3 OF 3