Courtyard Creations TMS24BJ-WM User manual

WASHER d6.5*D13*1.0
LEG
CROSS BOLT
17KAA0101----Y4
17KAB1101----Y4
18000337004
17C21A0709001Y4
17FA05040301-Y4
TMS24BJ-CS02
1
1
4
TMS24BJ-CS01 6
5
7
8
9
2
4
12
4
1
3
4
2
1
Q’TYPARTMATERIAL CODE
PARTS LIST
PART
NO.
TMS24BJ-WM
ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
PAGE 1 OF 2 COURTYARD CREATIONS INC.
18000C23001 8
TABLE TOP
3
3
2
2
2
2
Step 1:
Insert the cross bolts (#3) into the legs (#2).
See Figure 1.
FIGURE 1
PLASTIC NUT M6*P1.0
HEX.KEY WRENCH 4MM
NUT WRENCH 10&13MM
BOLT CAP
17C33A0722001Y4
BOLT M6*14
STOP DON’T RETURN TO STORE!
Use the correct bolts as indicated. Do not tighten any of the bolts until is completely assembled.
Do not sit or stand on this table.
Do not discard of any of the packaging until you have checked that you have all of the parts and
fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed by
children. Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
!
!
!
!
!
!
SERVICE CENTER TOLL FREE NO.
TEL: [phone]
FAX: [phone]

FIGURE 3
FIGURE 4
PAGE 2 OF 2
1
2
2
2
2
Step 4:
Turn the table to its upright position. See Figure 4.
Step 3:
Place the table top (#1) onto a non-abrasive
surface, such as a carpet, with its underside facing
upwards. Fasten the legs (#2) to the underside of
the table top (#1) rim by using bolts (#4) and
washers (#5). Make sure that all of the bolts have
been tightened completely and cover them with
bolt caps (#7). See Figure 3.
Step 2:
Fasten the cross bolts (#3) to the middle of the
legs (#2) by using washers (#5) and plastic nuts
(#6). Keep the plastic nuts loose. See Figure 2.
7
4
5
65
5
3
6
2
2
2
2
6
5
5
6
FIGURE 2
Cleaning and Maintenance
• Wash frame parts with mild soap and water, rinse
thoroughly, and dry completely. Do not use bleach,
acid, or other solvents on the frame parts.
• Inspect and tighten all bolts and fasteners on a
regular basis to ensure the proper performance
and safety of your table.
• When moving the table, lift. Do not drag this table.
• We recommend the use of furniture covers when
not in use.
• In order to prolong the life and beauty of your
table, we recommend that it be stored in a dry
and protected area during off season periods.
STOP DON’T RETURN TO STORE!
The store where you made your purchase
does not stock parts for this item.
If you need parts,
whether they are missing or damaged,
STOP!
Missing A Part?
No Need To Go Back To
The Store
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
Call Toll Free:
TEL: [phone]
FAX: [phone]
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU
HAVE ALL OF THEPARTSLISTED.
IF YOU DO NOTLOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTSTHAT MAYHAVEBECOME
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCEANY DIFFICULTY DURING ASSEMBLYOR IF ANY
PARTS ARE MISSING OR DAMAGED,CALL THE HELP LINE AT
1-877-539-7436 BEFORERETURNING THIS ITEM TO THE STORE.
PROVIDE THEFOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THEPRODUCT.
2-PARTNUMBER AND MATERIAL CODE OF THE PARTFROM THE PARTS
LIST.
MOST PROBLEMS CAN BERESOLVED WITHOUT RETURNING THIS
PRODUCT TO THERETAILER.