Crestron HT-CAM User manual

The Crestron HomeTime video conferencing system (HT-CAM) supports
at-home Zoom Rooms™ meetings. The HT-CAM can function as a
standalone system, or it can be integrated into an existing Crestron®
control system with or without DM NVX® technology.
The Crestron HomeTime add-a-room upgrade (HT-CAM-AUX) provides
the necessary devices for multi-room video conferencing. The upgrade
must be used in a Crestron HomeTime system (HT-CAM) that utilizes DM
NVX technology.
Minimum Requirements:
Standalone System
lA video display, connected to the UC-ENGINE-SD-Z
lA Zoom Rooms™ software account or activation code
lTablet device with the Zoom Rooms controller app installed
NOTE: For compatible tablet devices, refer to Zoom Rooms
Controller Requirements at System Requirements for Zoom
Rooms.
Integrated System
lExisting Crestron control system installation
lControl device such as a TSR- series remote, TSW- series touchpanel,
or mobile device running either the custom user interface provided or
another compatible custom user interface
Integrated System with DM NVX technology
lExisting Crestron control system installation that utilizes DM NVX
with a DM-NVX-350 or DM-NVX-351 to connect to the UC Engine
lA second video display
lControl device such as a TSR- series remote, TSW- series touchpanel,
or mobile device running either the custom user interface provided or
another compatible custom user interface
In the Box
1 HT-CAM, Crestron HomeTime™ Video Conferencing System
for Zoom Rooms™ Software
or
1 HT-CAM-AUX, Crestron HomeTime™ Video Conferencing
System Add-a-Room Upgrade
LOGI-960-001101, USB Camera (HT-CAM and HT-CAM-AUX)
1 Logitech® MeetUp Conferencing Camera (6511549)
UC-BRKT-100-SD-Z-ASSY, UC Engine Bracket Assembly
(HT-CAMOnly)
1 UC-BRKT-100-SD-Z-ASSY (6511147)
1 Power cord, 6 ft (1.8 m) (2053985)
Mounting Hardware
Accessories (HT-CAM Only)
1 CBL-CAT5E-7, CAT5e cable, RJ-45-to-RJ-45, Black, 7 ft
(2.1m) (6509924)
1 CBL-USBC-HD-9, USB 3.0 to HDMI® Converter cable, 9 ft
(2.7m) (6510718)
DM-NVX-350, Network AV Encoder/Decoder (HT-CAM-AUXOnly)
1 DM-NVX-350 (6508251)
1 Power Pack, 24 VDC, 2.5 A, 100-240 VAC (2045873)
1 Power Cord, 5 ft 10 in. (1.78 m) (2042043)
1 Connector, 4-Pin (2003576)
2 Connector, 5-Pin (2003577)
1
HT-CAM and HT-CAM-AUX QuickStart
Crestron HomeTime™ Video Conference System for Zoom Rooms™ Software

Mounting
Mount the Bracket Assembly
To mount the bracket assembly, refer to the UC-BRKT-100-SD-Z-ASSY
Quick Start (Doc.8527).
Mount the DM-NVX-350
To mount the DM-NVX-350, refer to the DM-NVX-350 Quick Start
(Doc.8391).
Connect
1. Remove the connector covers prior to making UC-ENGINE-SD-Z
connections on the UC-BRKT-100-SD-Z-ASSY bracket assembly.
2
HT-CAM and HT-CAM-AUX QuickStart
Crestron HomeTime™ Video Conference System for Zoom Rooms™ Software

2. Connect the UC-BRKT-100-SD-Z-ASSY bracket assembly, LOGI-960-001101 USB camera, and display based on the system types shown below.
NOTE: In router based control systems such as the CP3N or PRO3, ensure all system devices are connected to the LAN and not the control subnet.
lIntegrated and Standalone HT-CAM Systems: When the HT-CAM is connected to a control system, connect the devices as shown below. When the
HT-CAM is not connected to a control system, make LAN connections directly from the UC-ENGINE-SD-Z to the home's network.
3
HT-CAM and HT-CAM-AUX QuickStart
Crestron HomeTime™ Video Conference System for Zoom Rooms™ Software

lIntegrated HT-CAM System with DM NVX: When the HT-CAM is connected to a control system that utilizes DM NVX technology, connect the
devices as shown below.
a. Make network, HDMI, and USB connections as shown below.
4
HT-CAM and HT-CAM-AUX QuickStart
Crestron HomeTime™ Video Conference System for Zoom Rooms™ Software

b. Make HT-CAM and HT-CAM-AUX connections as shown below. If an HT-CAM-AUX is not used, only make the connections specified for the HT-CAM.
NOTE: When using the HT-CAM-AUX upgrade, only one display in the HT-CAM system can be used to video conference at a time.
5
HT-CAM and HT-CAM-AUX QuickStart
Crestron HomeTime™ Video Conference System for Zoom Rooms™ Software

3. Connect control peripherals such as TSW- series touch screen, a TSR- series remote, a mobile device, or a tablet (none included) as shown below. In a
standalone system, only a tablet running the Zoom Rooms controller app can be used as a control peripheral.
NOTE: Only TSR- series remotes and iPhone® mobile devices are supported with the Crestron provided module. Other control peripherals, such as a
TSW- series touch screen, will require a custom built module. Tablet devices can use the Zoom Rooms controller app.
6
HT-CAM and HT-CAM-AUX QuickStart
Crestron HomeTime™ Video Conference System for Zoom Rooms™ Software

4. Bundle the cables with the integrated cable tie wraps. The cable tie
wraps are reusable.
Complete the Installation
After completing UC-ENGINE-SD-Z connections, secure the connector
covers using a #1 Phillips head screwdriver to replace the screws.
NOTE: For additional security, replace the screws with the spanner
screws included with the bracket assembly. A 1/4 in. bit is also supplied
with the bracket assembly to install the spanner screws.
7
HT-CAM and HT-CAM-AUX QuickStart
Crestron HomeTime™ Video Conference System for Zoom Rooms™ Software

Configure
Apply Power
Press the power button on the UC-ENGINE-SD-Z and apply power to all
of the other devices in the system.
Configuring the System
For system configuration, refer to the Crestron HomeTime™ Video
Conferencing System Product Manual (Doc.8760).
Visit the Product Page
Scan the QR code to visit the product page.
HT-CAM
www.crestron.com/model/6511547
HT-CAM-AUX
www.crestron.com/model/6511548
8
HT-CAM and HT-CAM-AUX QuickStart
Crestron HomeTime™ Video Conference System for Zoom Rooms™ Software

Additional Information
Original Instructions
The U.S. English version of this document is the original instructions.
All other languages are a translation of the original instructions.
Crestron product development software is licensed to Crestron dealers and Crestron
Service Providers (CSPs) under a limited nonexclusive, nontransferable Software
Development Tools License Agreement. Crestron product operating system software is
licensed to Crestron dealers, CSPs, and end-users under a separate End-User License
Agreement. Both of these Agreements can be found on the Crestron website at
www.crestron.com/legal/software_license_agreement.
The product warranty can be found at www.crestron.com/warranty.
The specific patents that cover Crestron products are listed at
www.crestron.com/legal/patents.
Certain Crestron products contain open source software. For specific information, visit
www.crestron.com/opensource.
Crestron, the Crestron logo, Crestron HomeTime, and DM NVX are either trademarks
or registered trademarks of Crestron Electronics, Inc. in the United States and/or other
countries. iPhone is either a trademark or registered trademark of Apple Inc. in the
United States and/or other countries. HDMI is either a trademark or registered
trademark of HDMI Licensing LLC in the United States and/or other countries.
Logitech is either a trademark or registered trademark of Logitech International SA in
the United States and/or other countries. Wi-Fi is either a trademark or a registered
trademark of Wi-Fi Alliance in the United States and/or other countries. Zoom Rooms
is either a trademark or registered trademark of Zoom Video Communications, Inc. in
the United States and/or other countries. Other trademarks, registered trademarks,
and trade names may be used in this document to refer to either the entities claiming
the marks and names or their products. Crestron disclaims any proprietary interest in
the marks and names of others. Crestron is not responsible for errors in typography or
photography.
©2020 Crestron Electronics, Inc.
Doc. 8757A
05/27/20
9
HT-CAM and HT-CAM-AUX QuickStart
Crestron HomeTime™ Video Conference System for Zoom Rooms™ Software