Crestron MC2E Manual

Crestron MC2E 2-Series Professional Media Controller
2-Series Professional Media
Controller: MC2E
Purpose
The purpose of this addendum is to update incorrect drawing information and
provide additional information not supplied with the original MC2E Operations
Guide (Doc. 6142). Specifically, this addendum corrects incorrect power supply
descriptions appearing on pages 4, 9, and 14.
Incorrect Power Supply Descriptions
Due to production changes, the label for the power supply port has been changed
from “24 VDC, 2.0 A” to “24 VDC, 1.0 A”. References to this port on drawings
found on pages 4, 9, and 14 must be changed accordingly. All drawings showing the
power supply should show:
New Label for Power Port on MC2E
24VDC
1.0A
On page 9, the heading for the section “24VDC, 2.0A (Power Supply)” should read
“24VDC, 1.0A (Power Supply)”.
Crestron Electronics, Inc. Addendum #1 for DOC. 6142
15 Volvo Drive Rockleigh, NJ 0764703.04
Tel: 888.CRESTRON
Fax: [phone] Specifications subject to
www.crestron.com change without notice.