Crestron AM-300 User manual

The Crestron AirMedia® Presentation System 300 (AM-300) enables
secure wired and wireless presentation in conference rooms, lounges,
lobbies, and open spaces, and integrates with popular calendaring
platforms to maximize use. It is ideal for organizations with a dispersed
workforce, open floor plans, and reliance on mobile devices to present.
In the Box
1 AM-300, AirMedia Presentation System 300
Additional Items
4 Anchor, Wall, Plastic, Self Drill, #8 x 1-1/4 in. Screw
(P/N 2050199)
1 Connector, 4-Pin (P/N 2003576)
1 Connector, 5-Pin (P/N 2003577)
1 Power Cord, 5 ft 10 in. (1.78 m) (P/N 2042043)
1 Power Pack, 24 VDC, 2.5 A, 100-240 VAC (P/N 2045873)
Install the Device
The AM-300 can be mounted onto a rack rail or onto a flat surface.
Mount Onto a Rack Rail
Use two mounting screws (not included) to mount the left or right
mounting flange of the device onto the front or rear rail of a rack.
1
AM-300 QuickStart
AirMedia® Presentation System 300

Mount Onto a Flat Surface
Use the four included anchors to mount the device onto a flat surface.
NOTE: The anchors are best suited for surfaces with 3/8 in. to 3/4 in.
thickness.
2
AM-300 QuickStart
AirMedia® Presentation System 300

Make Connections
Make connections to the device as shown in the following diagrams. Use the included Crestron® power pack to supply power.
Top panel connections
3
AM-300 QuickStart
AirMedia® Presentation System 300

Bottom panel connections
4
AM-300 QuickStart
AirMedia® Presentation System 300

Configure the Device
Use the device’s web interface to configure the device. For details on
configuring the device, refer to the AM-200/AM-300 Product Manual
(Doc. 8254).
Visit the Product Page
Scan the QR code to visit the product page.
AM-300
www.crestron.com/model/6508637
5
AM-300 QuickStart
AirMedia® Presentation System 300

Additional Information
Original Instructions
The U.S. English version of this document is the original instructions.
All other languages are a translation of the original instructions.
Crestron product development software is licensed to Crestron dealers and Crestron
Service Providers (CSPs) under a limited nonexclusive, nontransferable Software
Development Tools License Agreement. Crestron product operating system software is
licensed to Crestron dealers, CSPs, and end-users under a separate End-User License
Agreement. Both of these Agreements can be found on the Crestron website at
www.crestron.com/legal/software_license_agreement.
The product warranty can be found at www.crestron.com/warranty.
The specific patents that cover Crestron products are listed at
www.crestron.com/legal/patents.
Certain Crestron products contain open source software. For specific information, visit
www.crestron.com/opensource.
Crestron, the Crestron logo, AirMedia, Crestron Toolbox, DigitalMedia, and DM are
either trademarks or registered trademarks of Crestron Electronics, Inc. in the United
States and/or other countries. HDMI and the HDMI logo are either trademarks or
registered trademarks of HDMI Licensing LLC in the United States and/or other
countries. Other trademarks, registered trademarks, and trade names may be used in
this document to refer to either the entities claiming the marks and names or their
products. Crestron disclaims any proprietary interest in the marks and names of others.
Crestron is not responsible for errors in typography or photography.
©2020 Crestron Electronics, Inc.
Doc. 8253D
(2050347)
05/31/20
6
AM-300 QuickStart
AirMedia® Presentation System 300