Crestron IntelliClass IC-300-CSP-P User manual

1
quickstart guide
IntelliClass™IC-300-CSP-P
www.crestron.com
888.273.7876 201.767.3400
Specifications subject to
change without notice.
IC-300-CSP-P
QUICKSTART DOC. 7054B (2028482) 12.12
Complete Classroom AV System Package
1
Crestron®IntelliClass™ systems provide educators with a simplified yet comprehensive
classroom presentation solution that saves time and money. Designed to deliver the
highest level of quality and convenience without using up the AV/IT budget, IntelliClass
assembles all the vital pieces needed to outfit the classrooms for an engaging teaching
experience.
IntelliClass makes it easy and affordable to install a quality projection system in every
classroom, ending the days of wheeling in the AV cart, or forcing students to squint at a
tiny TV screen. The IC-300-CSP-P package includes a professional wall mount controller,
a pair of high-performance ceiling speakers, a compact stereo amplifier, a universal
projector ceiling mount, wall plate inputs for (one) video and (two) VGA computer sources,
cabling and connectors. Just add a preferred video projector and screen to complete the
classroom presentation system. IntelliClass also integrates seamlessly with interactive
whiteboards and wireless microphones.
The diagram to the right shows a typical IC-300-CSP-P system arrangement.
Verify Contents
Before starting installation procedures, check the contents of the system package.
The items that should have been received are listed in the following table. Retain
all documents and parts supplied for use in the installation process.
DESCRIPTION PART NUMBER QTY
Media Presentation Controller, White MPC-M5-W 1
Media Presentation Audio Amplifier MP-AMP30 1
Ceiling Mount Media Presentation Speakers, Pair, White FSDI8-W 1
Media Presentation Wall Plate, Video & Audio, White MP-WP100-W11
Media Presentation Wall Plate, VGA & Audio, White MP-WP131-W12
Universal Projector Mount, White PMTC-50-6W 1
Power Pack for MP-AMP30 PW-2420RU 1
PoE Injector for MPC-M5 PWE-4803RU 1
RS-232 Projector Control Cable, Plenum, 50 ft (15 m) CBL-KSERIAL-DB9-L-P-5021
Ethernet LAN Cable, Plenum, 50 ft (15 m) CBL-CAT5E-P-5021
Speaker Cable, 16AWG, Plenum, 35 ft (11 m) CBL-SPK-P-35 2
RCA Video & Stereo Audio Cable, Plenum, 50 ft (15 m) CBL-KAV-RCAM3-L-P-502, 3 1
HD15 VGA Cable, Plenum, 50 ft (15 m) CBL-KVGA-L-P-502, 3 2
RCA Stereo Audio Cable, Plenum, 50 ft (15 m) CBL-KAUDIO-RCAM2-L-P-5022
Projector-to-Amplifier RCA Stereo Audio Cable, 3 ft (1 m) (Supplied with MP-AMP30) 1
RCA to 3.5mm Mini-TRS Stereo Audio Adapter CBL-AUDIO-RCAF-0.524
1-Gang Decorator Style Faceplate, White FPL-G1-W-T 3
1-Gang Low-Voltage Trim Ring BB-G1-LV 3
2-Gang Low-Voltage Trim Ring BB-G2-LV 1
1. Each package includes a 2-gang post-construction trim ring for the MPC-M5-W, and a 1-gang post-construction
trim ring and decorator style faceplate for each wall plate.
2. Specified in illustration on page 2.
3. Includes uninstalled RCA and/or BNC compression connectors as required for termination at the wall plate.
Installation requires IDEAL OmniSeal™ 30-793 or equivalent compression tool (not included).
2Installation
Tools Required - Not Supplied
Hand-Held Drill
Wire Cutter
Wire Stripper
Philips Screwdriver(s)
Flathead Screwdriver(s)
Compression Tool for supplied RCA and
BNC connectors (Refer to footnote 3
in the table on this page.)
Screw (4)
Washer (4)
Wingnut (4)
Washer (4)
Ceiling Tile
PMTC-50-6W
MP-AMP30
1. Refer to the documentation supplied with the projector to determine the
optimum mounting location. Refer also to the typical hookup arrangement
diagram provided in section ❸on page 2.
2. Install the PMTC-50-6W Universal Projector Ceiling Mount following the
instructions contained in the latest version of the Installation Guide
(Doc. 7013), supplied.
3. Mount the MP-AMP30 Media Presentation Audio Amplifier to the
PMTC-50-6W, using four screws, eight washers, and four wingnuts
(provided). Refer to the diagram to the right for details.
4. Mount the FSDI8-W speakers in the ceiling grid following the instructions
contained in the latest version of the QuickStart Guide (Doc. 7070), supplied.
5. Mount the Media Presentation Wall Plate devices in appropriate locations
in the room.
6. Run the cables for the system. The supplied cables are plenum rated so
they can be routed above the ceiling, and are already terminated for the
projector end. The opposite ends are not terminated to make it easier to
route the cables through the walls and ceiling.
7. Terminate BNC and RCA fittings as required.
8. Configure the MPC-M5 using the MPC Wizard in SystemBuilder™. Refer to the
instructions contained in the latest version of the Operations & Installation Guide
(Doc. 6955), supplied.
LAN
LAN PoE
POWER
PWE-4803RU
AC POWER
CORD
POWER LIGHTS
OFF
LIGHTS
ON
SCREEN
DOWN SCREEN
UP
VOLUME
DOWN
VOLUME
UP
DVD
LAPTOP
PC
MPC-M5MPC-M5
PROJECTOR
MP-WP100
LAN
PW-2420RU
MP-AMP30
CRESTRON
2 CHANNELS 15 WATTS
VGA
AUDIO
CBL-VGA-AUD*
MP-WP131
MP-AMP30
AC POWER
CORD
VGA
AUDIO
CBL-VGA-AUD*
MP-WP131
MPC-M5
POWER LIGHTS
OFF
LIGHTS
ON
SCREEN
DOWN SCREEN
UP
VOLUME
DOWN
VOLUME
UP
DVD
LAPTOP
PC
MPC-M5MPC-M5
CEILING
MOUNT
PMTC-50-6W
*These Cables Sold Separately
LAPTOP
LAPTOP
Control Cable 50’
CAT5E Cable 50’
50’ A/V Cable
50’ Video
50’ Audio
35’ (x2) CBL-SPK-P-35
3’
50’ Video
50’ Audio
VCR DVD
CBL-RCA*
CBL-RCA2*
CEILING
SPEAKERS
FSDI8-W

QUICKSTART DOC. 7054B (2028482) 12.12
2
quickstart guide
www.crestron.com
888.273.7876 201.767.3400
Specifications subject to
change without notice
IC-300-CSP-P
Complete Classroom AV System Package
CBL-AUDIO-RCAF-0.5
The specific patents that cover Crestron products are listed at
patents.crestron.com.
Crestron, the Crestron logo, the Crestron C logo, IntelliClass, RoomView
Connected, and SystemBuilder are either trademarks or registered
trademarks of Crestron Electronics, Inc. in the United States and/or other
countries. IDEAL and OminSeal are either trademarks or registered
trademarks of IDEAL INDUSTRIES, INC. in the United States and/or other
countries. Other trademarks, registered trademarks, and trade names may
be used in this document to refer to either the entities claiming the marks
and names or their products. Crestron disclaims proprietary interest in the
marks and names of others.
©2012 Crestron Electronics, Inc.
IntelliClass™IC-300-CSP-P
LGR
Red
Green
Blue
Black
CBL-KVGA-L-P-50
WP-131
CBL-KAV-RCAM3-L-P-50
WP-100
Rear
LGR
Rear
Terminate with supplied BNC
compression fittings.
Red
Green
Blue
Black
Red
Green
Blue
Black
Gray
TYPICAL PROJECTOR
Red
Green
Blue
LAN
L R
+ - + -
Terminate with supplied
RCA compression fittings.
CBL-KAUDIO-RCAM2-L-P-50
Twist shields together and
insert into Gterminal of
3-pin detachable
connector (supplied).
Terminate with
supplied RCA
compression fittings.
MPC-M5
MP-AMP30
PWE-4803RU
Red
Green
Blue
Black
Gray
WP-131
CBL-KAUDIO-RCAM2-L-P-50
Terminate with supplied BNC
compression fittings.
Twist shields together and
insert into Gterminal of
3-pin detachable
connector (supplied).
RCA - RCA Cable
Included w/MP-AMP30
CBL-AUDIO-RCAF-0.5
LAN PoE
CBL-KSERIAL-DB9-L-P-50
CBL-AUDIO-RCAF-0.5
NOTE: Projector volume is
controlled via the MPC-M5.
LAN
If the Crestron C logo ( ) is present on the projector,
then it is part of the RoomView Connected Devices family, and
supports advanced direct connectivity with the MPC-M5.
Utilizing the projector’s built in LAN port, the MPC-M5 can
directly interface with the projector, offering a host of advanced
monitoring and configuration options that far exceed the
capabilities of basic serial and IR control. This great feature
eliminates the need to use the provided
CBL-KSERIAL-DB9-L-P-50. For more information, please refer
to the following Web site:
www.crestron.com/intelliclass.
For use with projectors that are not part of
the RoomView Connected®devices family.
Cable
contains
either a
white wire
or a yellow
wire.
Strip the ends of the wires
approximately 3/8 inch (12 mm).
Observe the correct polarity (+(red)
to +terminal and -(black) to -
terminal) and insert into the two
2-pin detachable connectors
(supplied).
CBL-SPK-P-35
Strip the speaker end of the
cable wires approximately
5/8 inch (15 mm) and twist
the bared strands.
Use the wire nuts supplied
with the speakers to
connect the speaker wires
with the speaker cable
wires, (red to red and black
to black). Refer to Doc.
7070 supplied with the
speakers for details.
FSDI8-W
3Typical Hookup Arrangement