Crestron GLPPA-REMOTE-USER User manual

Crestron GLPPA-REMOTE-USER
User Remote for GLPP Systems
Operations Guide
Crestron Electronics, Inc. Operations Guide
15 Volvo Drive DOC. 7217B
Rockleigh, NJ 07647 (2031705)
Tel: 888.CRESTRON 08.13
Fax: [phone] Specifications subject to
www.crestron.com change without notice.
Further Inquiries
To locate specific information or resolve questions after
reviewing this guide, contact Crestron's True Blue Support at
1-888-CRESTRON [1-888-273-7876] or, for assistance within
a particular geographic region, refer to the listing of Crestron
world wide offices at www.crestron.com/offices.
To post a question about Crestron products, log onto
Crestron's Online Help at www.crestron.com/onlinehelp.
First-time users must establish a user account to fully benefit
from all available features.
Future Updates
As Crestron improves functions, adds new features, and
extends the capabilities of the GLPPA-REMOTE-USER units,
additional information may be made available as manual
updates. These updates are solely electronic and serve as
intermediary supplements prior to the release of a complete
technical documentation revision.
Check the Crestron Web site periodically for manual update
availability and its relevance. Updates are identified as an
“Addendum” in the Download column.
REMOTE COMMANDS
Commands for the GLPPA-REMOTE-USER are listed in the following table.
MASTER ON/OFF If any load is on, this button turns all loads off. Otherwise all
loads turn on to 100%.
MASTER RAISE All loads that are on, at any level, begin to raise. Loads that are
off stay off.
MASTER LOWER All loads that are on, at any level, begin to lower to 1%. They do
not lower to off.
LOADS 1–3 ON/OFF Toggles the load between off and 100%.
LOADS 1–3 RAISE Raises the load level. This turns the load on if it is off.
LOADS 1–3 LOWER Lowers the load level. The load stops at 1%. If the lower
command continues for another 2 seconds, the load turns off.
COMMANDS DESCRIPTION
ON Turns the loads on.
OFF Turns the loads off.
SCENE 1–8 Toggles the loads according to the programmed settings for
scenes 1 through 8. "Scene 1" enables daylighting.
EDIT SCENES USING USER REMOTE
As of the date of manufacture, the GLPPA-REMOTE-USER
has been tested and found to comply with specifications for
CE marking and standards per EMC and Radiocommunica-
tions Compliance Labelling.
The Crestron®GLPPA-REMOTE-USER is a
compact IR wireless remote designed
specifically for the user of a Crestron Green
Light® Power Pack (GLPP)—a room
controller that communicates with
photocells, occupancy sensors, and control
stations to automatically control lighting in
any room. Operating on two (2) AAA
batteries (included), the
GLPPA-REMOTE-USER provides buttons
for operating the GLPP.
DESCRIPTION
GLPPA-REMOTE-USER Physical View
Use the GLPPA-REMOTE-USER to change the default scene settings for scenes 1
through 8.
1. Use LOAD 1 ON/OFF,LOAD 1 , or LOAD 1 buttons to set load to the desired
level. Repeat this process for the other connected loads. Alternatively, use MASTER
ON/OFF,MASTER , or MASTER buttons to set the levels of all connected loads.
2. Press and hold the appropriate SCENE 1 through SCENE 8 button for 2 seconds to
save the scene. The GLPP beeps when the scene is saved.
NOTE: Only "Scene 1" enables daylighting.
3. Repeat the steps above for all scenes that need to be configured.

Return and Warranty Policies
Merchandise Returns / Repair Service
1. No merchandise may be returned for credit, exchange, or service without prior authorization
from Crestron. To obtain warranty service for Crestron products, contact an authorized
Crestron dealer. Only authorized Crestron dealers may contact the factory and request an
RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of
the problem, name and phone number of contact person, RMA number, and return address.
2. Products may be returned for credit, exchange, or service with a Crestron Return
Merchandise Authorization (RMA) number. Authorized returns must be shipped freight
prepaid to Crestron, 6 Volvo Drive, Rockleigh, N.J. or its authorized subsidiaries, with RMA
number clearly marked on the outside of all cartons. Shipments arriving freight collect or
without an RMA number shall be subject to refusal. Crestron reserves the right in its sole
and absolute discretion to charge a 15% restocking fee plus shipping costs on any products
returned with an RMA.
3. Return freight charges following repair of items under warranty shall be paid by Crestron,
shipping by standard ground carrier. In the event repairs are found to be non-warranty,
return freight costs shall be paid by the purchaser.
Crestron Limited Warranty
Crestron Electronics, Inc. warrants its products to be free from manufacturing defects in materials
and workmanship under normal use for a period of three (3) years from the date of purchase from
Crestron, with the following exceptions: disk drives and any other moving or rotating mechanical
parts, pan/tilt heads and power supplies are covered for a period of one (1) year; touch screen
display and overlay components are covered for 90 days; batteries and incandescent lamps are not
covered.
This warranty extends to products purchased directly from Crestron or an authorized Crestron
dealer. Purchasers should inquire of the dealer regarding the nature and extent of the dealer's
warranty, if any.
Crestron shall not be liable to honor the terms of this warranty if the product has been used in any
application other than that for which it was intended or if it has been subjected to misuse, accidental
damage, modification, or improper installation procedures. Furthermore, this warranty does not
cover any product that has had the serial number altered, defaced, or removed.
This warranty shall be the sole and exclusive remedy to the original purchaser. In no event shall
Crestron be liable for incidental or consequential damages of any kind (property or economic
damages inclusive) arising from the sale or use of this equipment. Crestron is not liable for any
claim made by a third party or made by the purchaser for a third party.
Crestron shall, at its option, repair or replace any product found defective, without charge for parts
or labor. Repaired or replaced equipment and parts supplied under this warranty shall be covered
only by the unexpired portion of the warranty.
Except as expressly set forth in this warranty, Crestron makes no other warranties, expressed or
implied, nor authorizes any other party to offer any warranty, including any implied warranties of
merchantability or fitness for a particular purpose. Any implied warranties that may be imposed by
law are limited to the terms of this limited warranty. This warranty statement supersedes all previous
warranties.
The specific patents that cover Crestron products are listed at patents.crestron.com.
Crestron, the Crestron logo, and Crestron Green Light are either trademarks or registered trademarks of Crestron Electronics, Inc. in the
United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer
to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names
of others. Crestron is not responsible for errors in typography or photography.
This document was written by the Technical Publications department at Crestron.
©2013 Crestron Electronics, Inc.