Crestron USB-SW-200 User manual

USB-SW-200 and USB-SW-400
USB 3.2 Data Matrix Switchers
Product Manual
Crestron Electronics, Inc.

The original language version of this document is U.S. English.
All other languages are a translation of the original document.
Regulatory Model: M202208001
Crestron product development software is licensed to Crestron dealers and Crestron Service Providers (CSPs) under a
limited nonexclusive, nontransferable Software Development Tools License Agreement. Crestron product operating
system software is licensed to Crestron dealers, CSPs, and end-users under a separate End-User License Agreement.
Both of these Agreements can be found on the Crestron website at www.crestron.com/legal/software_license_
agreement.
The product warranty can be found at www.crestron.com/warranty.
The specific patents that cover Crestron products are listed online at www.crestron.com/legal/patents.
Certain Crestron products contain open source software. For specific information, please visit
www.crestron.com/opensource.
Crestron, the Crestron logo, and XiO Cloud are either trademarks or registered trademarks of Crestron Electronics, Inc.
in the United States and/or other countries. Intertek and the Intertek logo are either trademarks or registered
trademarks of Intertek Group in the United States and/or other countries. Active Directory is either a trademark or
registered trademark of Microsoft Corporation in the United States and/or other countries. USB-C and USB Type-C are
either trademarks or registered trademarks of USB Implementers Forum, Inc. in the United States and/or other
countries. DisplayPort is either a trademark or registered trademark of Video Electronics Standards Association in the
United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this
document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any
proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or
photography.
©2023 Crestron Electronics, Inc.

Contents
Overview 5
Products 6
Specifications 7
USB-SW-200 Specifications 8
Product Specifications 8
Dimension Drawings 10
USB-SW-400 Specifications 11
Product Specifications 11
Dimension Drawings 13
Installation 14
In the Box 14
Mount the Device 15
Connect the Device 16
USB-SW-200Connections 16
USB-SW-400 Connections 17
Observe the LEDIndicators 18
Configuration 19
Web Interface Configuration 19
Access the Web Interface 19
Create an Admin Account 20
Web Configuration 21
Action Menu 23
Status 28
Settings 31
Security 40
802.1x Configuration 45
Resources 46
Crestron Support and Training 46
Programmer and Developer Resources 46
Product Certificates 46
Product Manual — Doc. 9403A Contents • iii

iv • Contents Product Manual — Doc. 9403A

Product Manual — Doc. 9403A USB 3.2 Data Matrix Switcher • 5
Overview
The USB 3.2 Data Matrix Switcher provides a plug-and-play, point-to-point solution for quickly
connecting and sharing USBdevices. Easily route USB data from six device USB ports to multiple host
devices.
lFull matrix USB3.2 data switcher
lTwo (USB-SW-200) or four (USB-SW-400) USB-C® host ports and six device USB ports
lSupports 10 Gbps SuperSpeed+ USB 3.2 data
lAutomatic and priority USB routing
lMouse-based and keyboard shortcut host switching
lOption to lock devices to single USBhost
lKeepalive emulation for HID devices
lSimple operation with front panel control or web interface
lIntegration with Rest API, SIMPL, SIMPL#Pro
lEnterprise-grade security encryption protects privacy and ensures compliance with ITpolicies
lXiO Cloud® service support for remote provisioning and management

6 • USB 3.2 Data Matrix Switcher Product Manual — Doc. 9403A
Automatic Switching of Inputs
Automatic switching among the USB inputs can occur based on the last connected device or on the
routing priority assigned to each input. Switching behavior is configurable using the web interface or the
XiO Cloud® service and is programmable using a Crestron control system. In addition, input selection
push buttons on the front panel of the USB 3.2 Data Matrix Switcher enable the desired inputs to be
selected manually.
Switch Host Devices with Peripherals
Seamlessly switch host devices by moving the mouse from one screen to another or through keyboard
shortcuts. Keepalive emulation ensures that connected hosts are awake and ready to receive the input.
Enterprise-Grade Security
The USB 3.2 Data Matrix Switcher is an enterprise-grade solution that can be deployed across hundreds
of spaces and set up easily using just a web browser, the front panel, or the XiO Cloud service.
Employing standard network security protocols such as 802.1x network access control, Active Directory®
authentication, SSH, SSL, and secure CIP, the USB 3.2 Data Matrix Switcher protects privacy and
ensures compliance with your organization’s IT policies.
XiO Cloud® Provisioning and Management Service
The USB 3.2 Data Matrix Switcher is compatible with the XiO Cloud service, which enables installers and
IT managers to easily deploy and manage thousands of devices. The XiO Cloud service allows for system
alerts and network management and provisioning.
For more information, visit www.crestron.com/xiocloud.
Products
The USB 3.2 Data Matrix Switcher is available in the following models:
lUSB-SW-200, 2-Input USB 3.2 Data Matrix Switcher
lUSB-SW-400, 4-Input USB-3.2 Data Matrix Switcher

Product Manual — Doc. 9403A USB 3.2 Data Matrix Switcher • 7
Specifications
Refer to the following sections for more information on the specifications for the USB 3.2 Data Matrix
Switcher.
This section provides the following information:
lUSB-SW-200 Specifications on page 8
lUSB-SW-400 Specifications on page 11

8 • USB 3.2 Data Matrix Switcher Product Manual — Doc. 9403A
USB-SW-200 Specifications
Product specifications for the USB-SW-200 are provided below.
Product Specifications
Connectors
HOST 1-2 (2) USB-C 3.2 Gen 2 data connectors
DEVICE 1-4 (2) USB-C3.2 Gen 2 data connectors;
Provides up to 15 W of power over USB
(2) USB-A 3.2 data connectors;
Provides up to 4.5 Wof power over USB
NOTE: The USB-C 3.2 Gen 2 data connectors do not support DisplayPort™ Video (DP Alt Mode) or Power
Delivery (PD).
DEVICESHID (2)USB-A 2.0 connectors;
USB 2.0/1.1 port for keyboard and mouse;
Provides up to 2.5 W of power over USB
LAN (1) 8-pin RJ-45 connector;.
100Base-TX/1000Base-T Ethernet port
24V 4A (1) DCpower connector;
24VDC power input
INPUT (1) 3-pin I/O connectors
SERVICE (1)USB-A connector
Controls and Indicators
PWR (1) Multicolor LED, indicates operating power supplied
SETUP (1) LED;
(1) Push button for unit restore
AUTO (1) LED;
(1) Push button for selecting auto-switching mode
HOST1-2 (2) LEDs;
(2) Push buttons for manual routing
Power
PowerPack 4A @ 24VDC
Power Consumption 46 W
Environmental
Temperature 32° to 104° F (0° to 40° C)
Humidity 10% to 95% RH (non-condensing)
Construction

Product Manual — Doc. 9403A USB 3.2 Data Matrix Switcher • 9
Mounting Freestanding or surface mount
Chassis Metal, black finish
Dimensions
Height 1.12 in. (28 mm)
Width 8.36 in. (212 mm)
Depth 5.04 in. (128 mm)
Weight
1.4 lb (.63 kg)
Compliance
Regulatory Model: M202208001
Intertek® Listed for US and Canada

10 • USB 3.2 Data Matrix Switcher Product Manual — Doc. 9403A
Dimension Drawings
Dimension drawings for the USB-SW-200 are provided below.

Product Manual — Doc. 9403A USB 3.2 Data Matrix Switcher • 11
USB-SW-400 Specifications
Product specifications for the USB-SW-400 are provided below.
Product Specifications
Connectors
HOST 1-4 (4) USB-C 3.2 Gen 2 data connectors
DEVICE 1-4 (2) USB-C3.2 Gen 2 data connectors;
Provides up to 15 W of power over USB
(2) USB-A 3.2 data connectors;
Provides up to 4.5 Wof power over USB
NOTE: The USB-C 3.2 Gen 2 data connectors do not support DisplayPort™ Video (DP Alt Mode) or Power
Delivery (PD).
DEVICESHID (2)USB-A 2.0 connectors;
USB 2.0/1.1 port for keyboard and mouse;
Provides up to 2.5 W of power over USB
LAN (1) 8-pin RJ-45 connector;.
100Base-TX/1000Base-T Ethernet port
24V 4A (1) DCpower connector;
24VDC power input
INPUT (2) 3-pin I/O connectors
SERVICE (1)USB-A connector
Controls and Indicators
PWR (1) Multicolor LED, indicates operating power supplied
SETUP (1) LED;
(1) Push button for unit restore
AUTO (1) LED;
(1) Push button for selecting auto-switching mode
HOST1-4 (4) LEDs;
(4) Push buttons for manual routing
Power
PowerPack 4A @ 24VDC
Power Consumption 47 W
Environmental
Temperature 32° to 104° F (0° to 40° C)
Humidity 10% to 95% RH (non-condensing)
Construction

12 • USB 3.2 Data Matrix Switcher Product Manual — Doc. 9403A
Mounting Freestanding or surface mount
Chassis Metal, black finish
Dimensions
Height 1.12 in. (28 mm)
Width 8.36 in. (212 mm)
Depth 5.04 in. (128 mm)
Weight
1.4 lb (.63 kg)
Compliance
Regulatory Model: M202208001
Intertek® Listed for US and Canada

Product Manual — Doc. 9403A USB 3.2 Data Matrix Switcher • 13
Dimension Drawings
Dimension drawings for the USB-SW-400 are provided below.

14 • USB 3.2 Data Matrix Switcher Product Manual — Doc. 9403A
Installation
Refer to the sections below to install the USB 3.2 Data Matrix Switcher.
In the Box
Qty. Description
1 USB 3.2 Data Matrix Switcher
Additional Items
4 Screw, 4-40 x 1/4 in., Phillips, Black (2007158)
4 Screw, 6-32 x 3/4 in., Truss, Combo, Zinc (2009211)
2 Metal mounting bracket, Black (2057072)
4 Plastic anchor (2043585)
1 3-pin connector (2003575)
4 Washer, Zinc (2007664)
1 24VDC power pack, PW-2440RU (2057005)
1 Power cord (2042043)

Product Manual — Doc. 9403A USB 3.2 Data Matrix Switcher • 15
Mount the Device
The USB 3.2 Data Matrix Switcher can be mounted to a flat surface. Follow the instructions below.
1. Using the included 1/4 in. screws, attach the included mounting brackets to the device.
2. Using the included washers, anchors, and 3/4 in. screws, mount the device to a flat surface.

16 • USB 3.2 Data Matrix Switcher Product Manual — Doc. 9403A
Connect the Device
Make connections to the USB 3.2 Data Matrix Switcher as shown below.
USB-SW-200Connections
Front Panel
Rear Panel

Product Manual — Doc. 9403A USB 3.2 Data Matrix Switcher • 17
USB-SW-400 Connections
Front Panel
Rear Panel

18 • USB 3.2 Data Matrix Switcher Product Manual — Doc. 9403A
Observe the LEDIndicators
Refer to the following table for information about the LEDindicators.
LEDIndicator Color Meaning
PWR Amber Power is being applied to the device. The device is booting.
Green Power is being applied to the device. The device is operational.
SETUP Red The setup button is pressed.
AUTO Green Auto route mode is enabled.
HOST Amber A host is detected but not routed.
Green A host is selected or routed to one or more devices.

Product Manual — Doc. 9403A USB 3.2 Data Matrix Switcher • 19
Configuration
This section describes how to configure the USB 3.2 Data Matrix Switcher.
Web Interface Configuration
The USB 3.2 Data Matrix Switcher web interface allows you to view status information and configure
network and device settings.
Access the Web Interface
To access the web configuration interface:
1. Use the Device Discovery tool in Crestron Toolbox™ software to discover the USB 3.2 Data Matrix
Switcher and its IPaddress on the network.
2. Open a web browser.
3. Enter the USB 3.2 Data Matrix Switcher IPaddress into the browser URLfield. The configuration
interface is displayed.
4. If connecting to the USB 3.2 Data Matrix Switcher for the first time, create an admin account as
described in Create an Admin Account on page 20.
5. Enter the admin account login credentials when prompted, then select Sign In.
The USB 3.2 Data Matrix Switcher web configuration is displayed with the Status tab shown, and with
the Device accordion open by default. For more information on using the web configuration interface,
refer to Web Configuration on page 21.

20 • USB 3.2 Data Matrix Switcher Product Manual — Doc. 9403A
Create an Admin Account
The first time the web configuration interface is accessed, a page is displayed asking the user to create
an admin account.
To create an admin account:
1. Enter a username and password for the admin account in the appropriate text fields.
CAUTION: Do not lose the username and password for the admin account, as the USB 3.2
Data Matrix Switcher must be reset to factory settings to regain access.
2. Select Create User to create the admin account. The web configuration interface refreshes to
show the standard login page.
3. Reenter the credentials created in step 1 and select Sign In to access the web configuration
interface.