Crestron MiniTouch MT-1000C User manual

Crestron MT-1000C
MiniTouch Handheld Wireless Touchpanel
Operations Guide

This document was prepared and written by the Technical Documentation department at:
Crestron Electronics, Inc.
15 Volvo Drive
Rockleigh, NJ 07647
1-888-CRESTRON
All brand names, product names and trademarks are the property of their respective owners.
©2008 Crestron Electronics, Inc.

Crestron MT-1000C MiniTouch Handheld Wireless Touchpanel
Contents
MiniTouch Handheld Wireless Touchpanel: MT-1000C 1
Introduction .................................................................................................................1
Features and Functions.................................................................................. 1
Specifications ................................................................................................ 2
Physical Description......................................................................................4
Industry Compliance .....................................................................................7
Setup............................................................................................................................8
Battery Installation and Replacement............................................................8
Docking Station Setup...................................................................................8
Identity Codes ...............................................................................................9
User Configuration Menus..........................................................................10
Recommended Care and Cleaning ..............................................................14
Programming Software..............................................................................................15
Earliest Version Software Requirements for the PC ...................................15
Programming with Crestron SystemBuilder ...............................................15
Programming with SIMPL Windows..........................................................15
Programming with VisionTools Pro-e ........................................................17
Example Program........................................................................................ 20
Uploading and Upgrading .........................................................................................21
Microsoft ActiveSync Installation...............................................................21
Windows Mobile Device Center Installation ..............................................22
Establishing Communication ......................................................................27
Projects and Firmware................................................................................. 27
Problem Solving ........................................................................................................ 28
Troubleshooting .......................................................................................... 28
Further Inquiries.......................................................................................... 29
Future Updates ............................................................................................29
Software License Agreement.....................................................................................30
Return and Warranty Policies.................................................................................... 32
Merchandise Returns / Repair Service ........................................................ 32
CRESTRON Limited Warranty ..................................................................32
Operations Guide – DOC. 6322A Contents •i

Crestron MT-1000C MiniTouch Handheld Wireless Touchpanel
MiniTouch Handheld Wireless
Touchpanel: MT-1000C
Introduction
Features and Functions
• Stylish and ergonomic handheld design
• 3.8" active-matrix color touchscreen
• 320 x 240 resolution | 16-bit Isys®graphics
• Synapse image rendering algorithm
• Backlit pushbuttons and 5-way thumbpad
• WAV file audio feedback
• Auto-shutoff and pick-up sensor
• 1-way RF or IR wireless communication
• Programmable using Crestron VisionTools®Pro-e software
• Includes docking station and Li-Ion battery pack
The MT-1000C MiniTouch is a compact wireless touchpanel combining an eye-
catching color touchscreen with a streamlined array of backlit pushbuttons in one
sleek, stylish handheld package. Its lightweight, ergonomic design affords
comfortable and intuitive handheld or tabletop use with a perfect combination of
tactile pushbutton control and touchpanel versatility. Stunning 16-bit color graphics
and WAV file audio feedback make the MT-1000C both highly functional and fun to
use for a host of AV control and automation applications.
Color Touchpanel
Isys®graphics and a brilliant 3.8" active matrix display combine to deliver much of
the performance of larger touchpanels from Crestron®in an incredibly portable size.
Like all Crestron touchpanels, the MT-1000C is fully programmable using Crestron's
VisionTools®Pro-e GUI design software (VT Pro-e), supporting 64K colors and
Synapse™ image rendering for crisp, sharp, anti-aliased objects and text, high-res
images, and 3D effects.
Backlit Pushbuttons
The MT-1000C also includes 16 tactile pushbuttons designated for quick access to
the most commonly used audio and video control functions. The 5-way thumbpad is
Operations Guide – DOC. 6322A MiniTouch Handheld Wireless Touchpanel: MT-1000C •1

MiniTouch Handheld Wireless Touchpanel Crestron MT-1000C
optimized for easy onscreen menu navigation, and all buttons include backlighting to
facilitate operation in a darkened home theater or boardroom.
Audio Feedback
Providing an additional dimension to the control experience, the MT-1000C can be
loaded with fully-customizable WAV files to provide audible feedback, button
clicks, and personalized voice prompts.
RF and IR Wireless
Crestron's proven RF wireless technology affords an operational range of up to 100
feet with complete freedom of movement. Long-range 418 MHz 1-way RF
communication enables compatibility with any Crestron control system via the
CNRFGWA-418 gateway (sold separately). Range is easily extended by distributing
multiple gateways throughout a structure. The MT-1000C is also ideal for use with
Crestron's MC2W Integrated Wireless Control System. IR communications is
facilitated using the C2N-IRGW Series IR Gateway or CNXRMIRD IR Receiver
(sold separately) along with a compatible control system or room solution box.
Li-Ion Rechargeable Batteries
A fast-charging Lithium Ion battery pack provides long-lasting wireless operation
without the "memory" issues typical of other rechargeable batteries. Adjustable auto-
shutoff preserves the battery for up to a week without recharging. The included
docking station simplifies recharging while simultaneously providing operating
power when the battery is low.
Pick-up Sensor
An integral movement sensor can be set to automatically wake the touchpanel and
turn on the backlight whenever the unit is picked up, readying the complete unit for
use without having to wait after touching the touchscreen or buttons.
Specifications
Specifications for the MT-1000C are given in the following table.
MT-1000C Specifications
SPECIFICATION DETAILS
Touchscreen Display
Display Type
Size
Aspect Ratio
Resolution
Color Depth
Illumination
Touchscreen
TFT active matrix color LCD
3.8 inch (9.65 cm) diagonal
4:3 QVGA
320 x 240 pixels
16-bit, 64k colors
Backlit fluorescent with movement sensor
Resistive membrane
RF Wireless
RF Transmitter
Range
418 MHz 1-way RF
50 – 100 feet (typical)
CNRFGWA-418 or MC2W gateway/receiver required (maximum 15 touchpanels per
gateway)
(Continued on following page)
2 •MiniTouch Handheld Wireless Touchpanel: MT-1000C Operations Guide - DOC. 6322A

Crestron MT-1000C MiniTouch Handheld Wireless Touchpanel
MT-1000C Specifications (Continued)
SPECIFICATION DETAILS
IR Wireless
IR Transmitter
Format
IR Range
38 kHz IR
RC5
15 to 25 feet (typical)
C2N-IRGW-Series IR Gateway, MC2W gateway/receiver or CNXRMIRD IR receiver
required (maximum 2 touchpanels per gateway)
Processor 206 MHz RISC Microprocessor
Memory 16 MB User RAM
Graphic Engine 16-bit non-palette graphics; 65,536 colors; Synapse
image rendering algorithm
Audio
WAV File 8 & 16-bit PCM, mono & stereo, 8 – 22 kHz
sampling rates
Battery
Model/Type MT-1000C-BTP Lithium Ion rechargeable battery
pack (included)
Usage per Charge Approximately 4 hours with display and backlight on
full continuous; up to 7 days inactive
Power Requirements
Docking Station/Charger
(MT-1000-DS included)
2 Amps @ 5 Volts DC
Power Supply (included) 0.3 Amps @ 100-250 Volts AC 50/60Hz
Minimum 2-Series Control
System Update File 1, 2
Version 3.008 or later
Environmental
Temperature
Humidity
41° to 104°F (5° to 40°C)
10% to 90% RH (non-condensing)
Enclosure
Construction High impact black/silver injection-molded case
Dimensions
Height
Width
Depth
1.23 in (3.12 cm)
7.15 in (18.16 cm)
4.74 in (12.04 cm)
Weight 10.4 oz (0.3 kg) including battery pack
1. The latest software versions can be obtained from the Crestron website. Refer to the NOTE following
these footnotes.
2. Crestron 2-Series control systems include the AV2 and PRO2. Consult the latest Crestron Product
Catalog for a complete list of 2-Series control systems.
NOTE: Crestron software and any files on the website are for authorized Crestron
dealers and Crestron Authorized Independent Programmers (CAIP) only. New users
may be required to register to obtain access to certain areas of the site (including the
FTP site).
Operations Guide – DOC. 6322A MiniTouch Handheld Wireless Touchpanel: MT-1000C •3

MiniTouch Handheld Wireless Touchpanel Crestron MT-1000C
Physical Description
This section provides information on the connections, controls and indicators
available on your MT-1000C and MT-1000-DS (included).
MT-1000C Physical View
4 •MiniTouch Handheld Wireless Touchpanel: MT-1000C Operations Guide - DOC. 6322A

Crestron MT-1000C MiniTouch Handheld Wireless Touchpanel
MT-1000C Overall Dimensions
MT-1000C Bottom View
Operations Guide – DOC. 6322A MiniTouch Handheld Wireless Touchpanel: MT-1000C •5

MiniTouch Handheld Wireless Touchpanel Crestron MT-1000C
Docking Station Overall Dimensions
6 •MiniTouch Handheld Wireless Touchpanel: MT-1000C Operations Guide - DOC. 6322A

Crestron MT-1000C MiniTouch Handheld Wireless Touchpanel
Connectors, Controls & Indicators
#
CONNECTORS,
CONTROLS &
INDICATORS
DESCRIPTION
1 VOL Volume up/down - programmable pushbutton
2 CH Channel up/down - programmable pushbutton
3 MUTE Programmable pushbutton
4 INFO Programmable pushbutton
5 Page Back Moves back one page – programmable pushbutton
6 MAIN Returns to main page - programmable pushbutton
7 Page Forward Moves forward one page - programmable pushbutton
8 Thumbpad Up, down, right, left, and SELECT - programmable
pushbuttons
9 MENU Programmable pushbutton
10 EXIT Programmable pushbutton
11 IR Transmitter Lens Protective cover over IR emitter
12 Battery charge contacts Enable charging of the touchpanel battery
13 USB Port For uploading firmware and touchpanel projects
14 Power input port Connects power supply to docking station
15 POWER Indicator Red LED indicates power applied to docking station
16 Battery charge contacts Power source for docked touchpanel
17 STATUS Indicator LED is red when battery is charging; blue when
battery is fully charged.
Industry Compliance
As of the date of manufacture, the MT-1000C has been tested and found to comply
with specifications for CE marking and standards per EMC and
Radiocommunications Compliance Labelling.
NOTE: This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
 Consult the dealer or an experienced radio/TV technician for help.
Operations Guide – DOC. 6322A MiniTouch Handheld Wireless Touchpanel: MT-1000C •7

MiniTouch Handheld Wireless Touchpanel Crestron MT-1000C
Setup
Battery Installation and Replacement
1. Unlock the bottom battery cover by rotating the locking screw clockwise.
2. Lift out the battery and disconnect the plug from the battery connector.
3. Connect the new battery. The connector is keyed so that it will only insert
one way.
4. Place the battery in the opening, ensuring that the battery wires will not be
pinched when you replace the battery cover.
5. Replace the battery cover and rotate the locking screw counterclockwise to
lock.
NOTE: A replacement battery may be ordered from Crestron.
Use part number 6002767.
Docking Station Setup
Plug the power supply (included) into an AC power outlet using the AC line cord
provided. Plug the cord from the power supply into the port provided on the back of
the docking station labeled “DC 5V”. The red POWER LED should turn on.
8 •MiniTouch Handheld Wireless Touchpanel: MT-1000C Operations Guide - DOC. 6322A

Crestron MT-1000C MiniTouch Handheld Wireless Touchpanel
Docking Station Power Supply Hookup
Place the MT-1000C in the cradle of the docking station and press down until you
hear a click.
When the MT-1000C is properly seated on the docking station, the STATUS LED
lights up red while the battery is charging. The status LED turns blue when the
battery is fully charged.
Identity Codes
The MT-1000C touchpanel uses two distinct types of identity codes: RF ID and
IR ID. These codes are assigned to the touchpanel when the unit is configured in
VT Pro-e. For the touchpanel to be identified within the Cresnet system, these
assignments must match assignments made in the SIMPL Windows program.
RF ID
Every MT-1000C touchpanel communicating via RF with a Cresnet control system
through a CNRFGWA-418 gateway or directly to an MC2W control system requires
a unique RF ID. The RF ID is a two-digit hexadecimal number, limited to increments
of the most significant digit (i.e., 00, 10, 20), that can range from 00 to F0. The RF
ID of the unit, set in VT Pro-e, must match the RF ID specified in the SIMPL
Windows program.
Operations Guide – DOC. 6322A MiniTouch Handheld Wireless Touchpanel: MT-1000C •9

MiniTouch Handheld Wireless Touchpanel Crestron MT-1000C
IR ID
Every MT-1000C touchpanel communicating via IR with a Cresnet control system
through a CNXRMIRD receiver, a C2N-IRGW Series IR gateway or directly to an
MC2W control system, requires a unique IR ID to secure IR communications. There
are two useable codes (two-digit hexadecimal numbers): 00 and 10; the default is 00.
The IR ID of the unit, set in VT Pro-e, must match the IR ID specified in the SIMPL
Windows program.
User Configuration Menus
To display the User Configuration screens, press and hold the MAIN button for five
seconds. The following menus are displayed in the settings screen.
NOTE: The configuration screen automatically times out after 30 seconds of
inactivity and returns to normal operation.
Backlight
Adjust the timeout of the backlight both on and off the docking station (cradle). You
can select up to three minutes for on the battery operation and up to four minutes for
on the docking station operation.
10 •MiniTouch Handheld Wireless Touchpanel: MT-1000C Operations Guide - DOC. 6322A

Crestron MT-1000C MiniTouch Handheld Wireless Touchpanel
Bright
Adjust the display brightness slider.
NOTE: A brighter display reduces battery life.
Button Light
Buttons can be backlit when touched, or always off to conserve battery life.
Sound
Adjust the volume of programmed audio.
Operations Guide – DOC. 6322A MiniTouch Handheld Wireless Touchpanel: MT-1000C •11

MiniTouch Handheld Wireless Touchpanel Crestron MT-1000C
Date & Time
Set the date and time.
Power
Displays the remaining charge and sets the low battery indication level.
System
Displays system memory and version information.
12 •MiniTouch Handheld Wireless Touchpanel: MT-1000C Operations Guide - DOC. 6322A

Crestron MT-1000C MiniTouch Handheld Wireless Touchpanel
Pickup
Sets the MT-1000C to turn on when picked up or moved.
Calibration
Calibrates the touchscreen. Use a stylus or pen top (not a finger) and follow the
directions on the screen.
Factory Default
Resets the memory to the factory condition.
WARNING: All programming will be lost. Do not use this button unless directed to
do so by technical support personnel.
Operations Guide – DOC. 6322A MiniTouch Handheld Wireless Touchpanel: MT-1000C •13

MiniTouch Handheld Wireless Touchpanel Crestron MT-1000C
Exit
The Exit button returns the MT-1000C to normal operation.
Recommended Care and Cleaning
Keep the surface of the touchscreen free of dirt, dust or other materials that could
degrade optical properties. Long-term contact with abrasive materials can scratch the
surface, which may detrimentally affect image quality.
• To avoid scratching the touchscreen, do not use a pen, pencil, or any sharp
object. Use a plastic pen top, PDA stylus, or your finger.
• The MT-1000C is not waterproof. Avoid using it in damp or wet locations.
• Keep the MT-1000C away from extreme heat or cold.
• The touchscreen contains a glass element; avoid dropping or impacting
against anything.
• If water is spilled on the MT-1000C, remove the battery pack and allow the
MT-1000C to dry for 48 hours before using.
For best cleaning results use a clean, damp, non-abrasive cloth with any
commercially available non-ammonia glass cleaner. Bezels may not provide a
complete watertight seal. Therefore, apply cleaning solution to the cloth rather than
the surface of the touchscreen. Wipe touchscreen clean and avoid getting moisture
beneath the bezels.
14 •MiniTouch Handheld Wireless Touchpanel: MT-1000C Operations Guide - DOC. 6322A

Crestron MT-1000C MiniTouch Handheld Wireless Touchpanel
Programming Software
Have a question or comment about Crestron software?
Answers to frequently asked questions (FAQs) can be viewed in the Online Help
section of the Crestron website. To post a question or view questions you have
submitted to Crestron’s True Blue Support, log in at http://support.crestron.com.
First-time users will need to establish a user account.
Earliest Version Software Requirements for the PC
NOTE: Crestron recommends that you use the latest software to take advantage of
the most recently released features. The latest software is available from the Crestron
website.
Crestron has developed an assortment of Windows-based software tools to develop
a Cresnet system. For the minimum recommended software versions, visit the
Version Tracker page of the Crestron website (www.crestron.com/versiontracker).
Programming with Crestron SystemBuilder
Crestron SystemBuilder is the easiest method of programming but does not offer as
much flexibility as SIMPL Windows. For additional details, download
SystemBuilder from the Crestron website and examine the extensive help file.
Programming with SIMPL Windows
NOTE: While SIMPL Windows can be used to program the MT-1000C, it is
recommended to use SystemBuilder for configuring a system.
SIMPL Windows is Crestron’s premier software for programming Crestron control
systems. It is organized into two separate but equally important “Managers”.
Configuration Manager Configuration Manager is the view where programmers “build” a Crestron control
system by selecting hardware from the Device Library.
The MT-1000C can be programmed to operate either as an RF device or as an IR
device. Either configuration requires that the MT-1000C communicate via a gateway
device: a C2N-IRGW Series for IR; a CNRFGWA-418 for RF, or via a control
system such as the M2CW that has built-in gateways for both RF and IR. The total
number of MT-1000Cs that can be incorporated into a given system depends on the
number and properties of the specific gateway(s) selected.
The following procedures are based on using an M2CW control system.
• To incorporate the MT-1000C into the system, drag the appropriate
MT-1000C from the Touchpanels | Touchpanels (Wireless One-Way) folder
of the Device Library and drop it in the System Views.
• Both instances of the MT-1000C are shown in the Device Library. Select
either one or both, as appropriate.
Operations Guide – DOC. 6322A MiniTouch Handheld Wireless Touchpanel: MT-1000C •15

MiniTouch Handheld Wireless Touchpanel Crestron MT-1000C
Locating the MT-1000C in the Device Library
The system tree of the control system displays the device in the appropriate slot(s)
with a default RF ID or IR ID as shown in the following illustration.
C2Net Device, Slot 7 and/or 8
• Additional MT-1000C devices are assigned different IR ID or RF ID
numbers as they are added.
• If necessary, double click a device to open the “Device Settings” window
and change the RF ID or IR ID, as shown in the following figures.
“MT-1000C Device Settings - IR” Window
16 •MiniTouch Handheld Wireless Touchpanel: MT-1000C Operations Guide - DOC. 6322A