Crestron TSS-770 User manual

The Crestron® TSS-770 and TSS-1070 are wall mount touch screens
designed specifically for room scheduling applications. The touch screens
install near the entrance of a meeting room or huddle space to provide a
clear indication of the room availability and schedule, and they integrate
seamlessly with a variety of popular scheduling services.
NOTE:The TSS-770 and TSS-1070 are functionally similar. For
simplicity within this guide, the term "touch screen"is used except
where otherwise noted. The TSS-770-T-LB and TSS-1070-T-LBkits
provide a version of the touch screen designed to run the Microsoft
Teams® Panels scheduling application exclusively.
In the Box
1 TSS-770 or TSS-1070*, Room Scheduling Touch Screens
Additional Items
1 Bracket, Mounting (2055453)
4 Screw, 6-32 x 3/4 in., Undercut Head, Phillips (2033247)
4 Screw, M3 x 16 mm, Flat Head,Phillips (2013788)
2 Screw, M3.5 x 25 mm, Flat Head,Phillips (2023756)
4 Anchor, #6-8, Self-Drilling (2035879)
4 Screw, 6-AB x 1 in., Flat Head, Phillips (2056874)
1 Bracket, Security (2055451)
2 Screw, M2 x 4 mm, Security (2055454)
1 Key, Security BracketRelease (2055452)
*Refer to the TSS-770-B-S and TSS-1070-B-S product pages at www.crestron.com for a
complete list of color variations.
Install the Mounting Bracket
The TSS-770 and TSS-1070 install over a standard 2-gang or 3-gang
U.S. electrical box, a 2-gang European electrical box, or a 2-gang U.K.
electrical box. The touch screen also installs into drywall.
NOTES:
lAdditional mounting options are possible using the following
mounting accessories. For more information, refer to the product
pages at www.crestron.com.
oTSW-UMB-70 universal mounting bracket
oTSW-UMB-70-PMK preconstruction mounting kit
oTSW-UMB-70-BBI wall mount back box
oTSW-770/1070-MSMK series multisurface mounting kits
oTSW-770/1070-MUMK mullion mounting kit
oTSW-770/1070-RMB series retrofit mounting brackets
oTSW-770/1070-RMK series rack mount kits
lInstalling the mounting bracket to an electrical box is required only
if one of the mounting solutions above is not used. Refer to the
documentation for your chosen mounting solution at
www.crestron.com/manuals.
Electrical Box Mounting
To mount the touch screen into an electrical box, use the appropriate
screws (four 6-32x 3/4in. screws, four M3x16mm screws, or two
M3.5x25 mm screws) to attach the mounting bracket to the electrical
box as shown in the following illustrations:
NOTE:For U.S. installations, use a #2 Phillips screwdriver. For
European or U.K. installations, use a #1 Phillips screwdriver.
TSS-770 and TSS-1070 QuickStart
7 in. and 10.1 in. Room Scheduling Touch Screens
1

lFor U.S. installations, use the four 6-32x 3/4in. screws.
lFor European installations, use the four M3x16mm screws.
lFor U.K. installations(not pictured), use the two M3.5x25 mm
screws to attach the mounting bracket to the electrical box. Insert
the screws through the center openings in the left and right sides of
the mounting bracket.
Drywall Mounting
Mounting hardware is provided with the touch screen for drywall
installations without an electrical box. Using this hardware will ensure
that the bracket is completely flush with the touch screen to provide
maximum magnetic force.
To install the mounting bracket into drywall:
1. Using the inside of the mounting bracket as a template, cut a
2–1/8 x 3-5/8 in. (54 x 92 mm)hole into the drywall. Ensure the
template is level prior to cutting the hole.
2. Align the mounting bracket with the cutout and ensure it is level.
3. Use one of the anchors to make a center mark in the drywall through
the four 2-gang openings in the template. Refer to the image below
for the required mounting holes.
4. Screw the four anchors into the drywall using the center marks as a
reference.
5. Attach the mounting bracket to the anchors using the four 6-ABx
1in. screws as shown in the image below.
2
TSS-770 and TSS-1070 QuickStart
7 in. and 10.1 in. Room Scheduling Touch Screens

Install the Security Bracket
(Optional)
The included security bracket may be attached to the touch screen to
prevent unauthorized removal after installation. The security bracket
snaps into place behind the mounting bracket so that the touch screen
cannot be removed without using the included release key.
Use the two M2 x 4 mm screws to attach the security bracket to the
touch screen rear housing as shown in the following illustration.
To remove the touch screen after installation, use the included release
key to push down on the security bracket release tabs as shown in the
following illustration while gently pulling the touch screen away from the
mounting bracket.
3
TSS-770 and TSS-1070 QuickStart
7 in. and 10.1 in. Room Scheduling Touch Screens

Connect the Touch Screen
Route all necessary cables through the rear of the mounting bracket,
and then make connections to the side of the touch screen rear housing.
Observe the following when connecting the touch screen:
lPower and data connection is provided to the touch screen by a single
Ethernet cable. A Crestron PoE (Power over Ethernet) power supply,
such as the PWE-4803RU, or a PoE-capable network switch is
recommended (neither included).
lThe USB ports are used to connect compatible Crestron LED
accessories to the touch screen.
NOTE: The TSS-770 may use either PoE or PoE+ to supply power to
compatible LED accessories over USB; the TSS-1070 requires at
minimum PoE+ to supply power to LED accessories over USB.
lApply power after all connections have been made.
Mount the Touch Screen
After all connections have been made, push the touch screen gently into
the mounting bracket so that its rear housing is secured within the
center opening of the mounting bracket.
If the touch screen is not level after installation, pull it out of the
mounting bracket and loosen the screws holding the bracket into place.
This procedure allows the mounting bracket to be rotated slightly.
Once the mounting bracket has been repositioned, retighten the screws,
reinstall the touch screen into the bracket, and ensure that the touch
screen is now level.
NOTE:To clean or disinfect a touch screen display, use a soft, clean,
damp (not wet) cloth with any commercially available non-ammonia
glass cleaner or disinfectant cleaner. Bezels do not provide a complete
watertight seal, so apply cleaning solution to the cloth rather than the
surface of the touch screen. Wipe the touch screen clean and avoid
ingress of moisture beneath the bezels.
4
TSS-770 and TSS-1070 QuickStart
7 in. and 10.1 in. Room Scheduling Touch Screens

Configure the Touch Screen
When power is applied for the first time, the touch screen boots with the
Crestron room scheduling application selected by default. The touch
screen may take up to two minutes to boot.
Device settings for the touch screen may be configured using the built-in
setup screens or the web configuration interface. For more information
on configuring the touch screen, refer to the TSS-770 and TSS-1070
Product Manual.
NOTE:The touch screen included in the TSS-770-T-LBor
TSS-1070-T-LB kitsboots to the Microsoft Teams Panels scheduling
application setup screen by default. To access the device setup screens,
refer to Access the Device Setup Screens on the adjacent column. To
configure the application, refer to Configure Microsoft Teams Panels.
Access the Device Setup Screens
To access the built-in setup screens, place five fingers on the display and
hold for 15 seconds. The main Setup screen is displayed (TSS-770
shown).
Use the setup screens to configure various settings for the touch screen,
including Ethernet setup, scheduling application selection, Wi-Fi network
setup, and diagnostics.
Access the WebConfiguration Interface
The touch screen provides a web configuration interface that is used to
view and configure various touch screen settings and to select a
scheduling application. The interface can be accessed using the touch
screen IP address or the XiO Cloud® service.
5
TSS-770 and TSS-1070 QuickStart
7 in. and 10.1 in. Room Scheduling Touch Screens

Touch Screen IPAddress
To access the web configuration interface using the touch screen IP
address:
1. Ensure that the touch screen is connected to the network.
2. Use the Device Discovery tool in Crestron Toolbox™ software to
discover the touch screen and its IP address on the network.
3. Enter the touch screen IPaddress into a web browser.
XiOCloud Service
The XiOCloud®service allows supported devices across an enterprise to
be managed and configured from one central and secure location in the
cloud. Supported Crestron® devices are configured to connect to the
service out of the box.
Use of the service requires a registered XiOCloud account. To register
for an XiOCloud account, refer to
www.crestron.com/Support/Tools/Licensing-Registration/XiO-Cloud-
Registration-Room-Licenses.
NOTE:The device may be disconnected from the XiOCloud service by
navigating to the Cloud Services tab in CrestronToolbox™software
(Functions >Device Info >Cloud Services). For details, refer to the
CrestronToolbox help file.
To connect the device to the XiOCloud service:
1. Record the MAC address and serial number that are labeled on the
shipping box or the device. The MAC address and serial number are
required to add the device to the XiOCloud service.
NOTE:If the device has multiple MAC addresses, use the MAC
address that is providing the primary connection back to the
network. For most devices, the Ethernet MAC address should be
used. However, if your device is connecting to the network over a
different protocol (such as Wi-Fi® communications), use the
MAC address for that protocol instead.
2. Log in to your XiOCloud account at portal.crestron.io.
3. Claim the device to the XiOCloud service as described in the
XiOCloudUserGuide.
Select the device from the cloud interface to view its status and
settings. The device may now also be managed and assigned to a group
or room. For more information, refer to the XiOCloudUserGuide.
NOTE:For XiOCloud accounts with room-based licenses, the device
must be added to a licensed room before its status and settings can be
viewed.
Set the Time Zone
The time zone must be set on the touch screen prior to selecting a
scheduling application.
To set the time zone:
1. Access the web configuration interface using either the touch screen
IP address or the XiO Cloud service.
2. Select the Settings tab.
3. Navigate to System Setup >Time/Date.
4. Select the time zone where the touch screen will be used from the
Time Zone drop-down menu.
5. Click Save Changes on the top right of the screen.
6
TSS-770 and TSS-1070 QuickStart
7 in. and 10.1 in. Room Scheduling Touch Screens

Create an AdminAccount
The first time the web configuration interface is accessed, a dialog box is
displayed asking the user to create an admin account. A similar message
is displayed when connecting to the device in Crestron Toolbox software
if an admin account has not already been created.
To create an admin account:
1. Enter a username and password for the admin account in the
appropriate text fields.
CAUTION:Do not lose the username and password for the admin
account, as the device must be reset to factory settings to regain
access.
2. Click OK. A dialog box is displayed stating that enabling
authentication will restart the web session.
3. Click Yes to confirm and restart. The username and password
created in step 1 must be entered to regain access to the web
configuration interface.
Select an Application
The touch screen ships with various built-in scheduling applications. An
application may be selected from the web configuration interface.
The touch screen included in the TSS-770-T-LBor TSS-1070-T-LB kits
runs the Microsoft Teams Panels scheduling application only. No other
application can be selected on these models.
NOTE:Applications can be selected and configured from the device
setup screens or from the web configuration interface at any time. For
more information, refer to the TSS-770 and TSS-1070 Product
Manual.
To select a touch screen application:
1. Enter the touch screen IP address into a web browser to access the
web configuration interface.
2. Navigate to Settings >Applications.
3. Select the desired scheduling provider from the Application Mode
drop-down menu.
4. If necessary, enter any additional information (such as a registration
URL) that is required for connecting to the scheduling provider.
5. Click Save Changes on the top right of the screen.
6. When prompted, reboot the touch screen. The touch screen reboots
into the selected scheduling mode.
An application may also be selected using the Application Selection
function on the main device Setup screen.
7
TSS-770 and TSS-1070 QuickStart
7 in. and 10.1 in. Room Scheduling Touch Screens

Configure Microsoft Teams Panels
The touch screen included in the TSS-770-T-LBor TSS-1070-T-LB kits
ships with the Microsoft Teams Panels scheduling application running
out of the box, with the Language Selection screen displayed upon initial
boot. The application must be configured prior to use.
NOTE:A Microsoft Teams account is required for configuration. Refer
to your ITadministrator for assistance.
To set up the Microsoft Teams Panels scheduling application on the
touch screen:
1. Select a language for the application on the Language Selection
screen.
2. Tap Next. The Time Zone Selection screen is displayed.
3. Select the time zone that will be used by the application on the Time
Zone Selection screen.
8
TSS-770 and TSS-1070 QuickStart
7 in. and 10.1 in. Room Scheduling Touch Screens

4. Tap Next. AMicrosoft Teams sign in screen is displayed.
5. Tap Sign In.
6. Enter your Microsoft Teams username and password when
prompted.
7. If two-factor authentication is enabled by your organization, follow
the prompts provided to authenticate with the application.
Upon successful sign in, the scheduling calendar for your organization is
displayed.
For more information on using Microsoft Teams, refer to
https://support.microsoft.com/en-us/teams.
Visit the Product Pages
Scan the QR code to visit the product page.
TSS-770
www.crestron.com/model/6511329
TSS-1070
www.crestron.com/model/6511331
9
TSS-770 and TSS-1070 QuickStart
7 in. and 10.1 in. Room Scheduling Touch Screens

Additional Information
Original Instructions
The U.S. English version of this document is the original instructions.
All other languages are a translation of the original instructions.
Regulatory Models:M201923002, M201923003
Crestron product development software is licensed to Crestron dealers and Crestron
Service Providers (CSPs) under a limited nonexclusive, nontransferable Software
Development Tools License Agreement. Crestron product operating system software is
licensed to Crestron dealers, CSPs, and end-users under a separate End-User License
Agreement. Both of these Agreements can be found on the Crestron website at
www.crestron.com/legal/software_license_agreement.
The product warranty can be found at www.crestron.com/warranty.
The specific patents that cover Crestron products are listed at
www.crestron.com/legal/patents.
Certain Crestron products contain open source software. For specific information, visit
www.crestron.com/opensource.
Crestron, the Crestron logo, Crestron Toolbox, Rava, Smart Graphics, and XiOCloud are
either trademarks or registered trademarks of Crestron Electronics, Inc. in the United
States and/or other countries. Bluetooth is either a trademark or registered trademark
of Bluetooth SIG, Inc. in the United States and/or other countries. Microsoft Teams is
either a trademark or a registered trademark of Microsoft Corporation in the United
States and/or other countries. Wi-Fi is either a trademark or registered trademark of
Wi-Fi Alliance in the United States and/or other countries. Other trademarks, registered
trademarks, and trade names may be used in this document to refer to either the
entities claiming the marks and names or their products. Crestron disclaims any
proprietary interest in the marks and names of others. Crestron is not responsible for
errors in typography or photography.
©2021 Crestron Electronics, Inc.
Doc ID 8743E
08/25/21
10
TSS-770 and TSS-1070 QuickStart
7 in. and 10.1 in. Room Scheduling Touch Screens