Crestron QM-FTCC How to use

Crestron QM-FTCC
QuickMedia™ FlipTop Computer Center
Operations & Installation Guide

This document was prepared and written by the Technical Documentation department at:
Crestron Electronics, Inc.
15 Volvo Drive
Rockleigh, NJ 07647
1-888-CRESTRON
All brand names, product names and trademarks are the property of their respective owners.
©2008 Crestron Electronics, Inc.

Crestron QM-FTCC QuickMedia™ FlipTop Computer Center
Contents
QuickMedia™ FlipTop Computer Center: QM-FTCC 1
Introduction ...............................................................................................................................1
Features and Functions................................................................................................1
Internal Block Diagram ...............................................................................................4
Specifications ..............................................................................................................5
Physical Description....................................................................................................7
Industry Compliance .................................................................................................14
Setup ........................................................................................................................................15
Network Wiring.........................................................................................................15
QuickMedia Wiring................................................................................................... 15
Identity Code .............................................................................................................16
Installation.................................................................................................................17
Hardware Hookup ..................................................................................................... 23
Configuration Software ...........................................................................................................25
Earliest Version Software Requirements for the PC .................................................25
Configuring with Crestron SystemBuilder ................................................................25
Configuring with SIMPL Windows ..........................................................................25
Example Program ......................................................................................................27
Adjusting the QM-FTCC Microphone Inputs ........................................................... 28
Uploading and Upgrading........................................................................................................ 31
Establishing Communication.....................................................................................31
Programs and Firmware ............................................................................................ 31
Program Checks ........................................................................................................ 32
Problem Solving ......................................................................................................................33
Troubleshooting......................................................................................................... 33
Check Network Wiring..............................................................................................34
Reference Documents................................................................................................35
Further Inquiries ........................................................................................................ 35
Future Updates .......................................................................................................... 36
Appendix A: International Receptacles ..................................................................................37
Appendix B: QuickMedia Installation and Compensation .....................................................38
Installation Notes....................................................................................................... 38
Compensation............................................................................................................ 38
Compatibility Charts .................................................................................................40
Return and Warranty Policies ..................................................................................................42
Merchandise Returns / Repair Service ...................................................................... 42
CRESTRON Limited Warranty.................................................................................42
Operations & Installation Guide – DOC. 6313B Contents •i

Crestron QM-FTCC QuickMedia™ FlipTop Computer Center
QuickMedia™ FlipTop Computer
Center: QM-FTCC
Introduction
The QM-FTCC FlipTop Computer Center is part of the Crestron MediaManager™
line of network devices, room control systems and signal routing solutions. It is
available in six different models.
Models
DESCRIPTION MODEL NUMBER COLOR
QM-FTCC-B BlackDomestic Models
with Keypad QM-FTCC-BALUM Brushed Aluminum
QM-FTCC-NB-B BlackDomestic Models
without Keypad QM-FTCC-NB-BALUM Brushed Aluminum
QMI-FTCC-B BlackInternational Models
with Keypad QMI-FTCC-BALUM Brushed Aluminum
The international models accommodate a wide variety of international AC adaptors.
For simplicity within this guide, the color/button suffix and international designation
are omitted and QM-FTCC is used except where noted.
Features and Functions
• Stylish flush-mount FlipTop housing
• Built-in engravable* keypad with 10 to 20 buttons and LEDs (keypad
models only)
• RGB/component input with stereo audio
• Dual channel gated mic/line preamp
• Video sensing | Auto-switching
• Integrated keypad with dual bar graphs
• LAN pass through and AC power outlet
• QuickMedia™ transport | Cresnet communications
• Low cost, quick and easy installation
• Easy setup using Crestron SystemBuilder™ software
• Optional cable management kit
* As an option, custom-engraved buttons can be designed and obtained by using the Crestron Engraver
software. Version 2.3.3 and Crestron Database 16.3.4 or later are available from the Crestron website
(www.crestron.com).
Operations & Installation Guide – DOC. 6313B QuickMedia™ FlipTop Computer Center: QM-FTCC •1

QuickMedia™ FlipTop Computer Center Crestron QM-FTCC
FlipTop Housing
Handsomely finished in either black anodized or brushed aluminum, the QM-FTCC
mounts flush in any tabletop surface for a clean, professional appearance. The sleek
design of the “FlipTop” lid features an integrated keypad (keypad models only) to
provide programmable pushbutton control at every interface location. Wiring for the
QM-FTCC is extremely simple requiring just a single CresCAT™-QM cable (sold
separately).
Computer Interface
Inputs are provided for one RGB/component signal with corresponding stereo audio
to accept a connection from a computer or other high-resolution source. For
complete connectivity, the QM-FTCC also includes an RJ-45 LAN pass through
connector and AC power receptacle.
Integrated Keypad (optional)
The QM-FTCC can be ordered with or without a keypad. This customizable keypad
provides 10 to 20 programmable pushbuttons for control of AV, lighting and other
functions. All button caps are engravable and include LED feedback indicators. Two
LED bar graphs are also provided to display level settings and other parameters. To
prevent accidental button presses, the keypad is automatically disabled whenever the
lid is not fully opened.
Gated Mic Preamp
Two gated microphone inputs are included via terminal block connectors located
below the table surface. Both dynamic and condenser type microphones are
supported with software switchable 48V phantom power available at both
microphone inputs. Balanced or unbalanced line level sources such as wireless
microphones can also be accommodated. Input gain and gating controls for each
microphone/line input are fully adjustable at setup and can also be controlled in real
time from a keypad or touchpanel.
QuickMedia™ Transport
Using Crestron’s revolutionary QuickMedia (QM) transport, all input signals are
transmitted from the QM-FTCC to any QuickMedia Receiver or Distribution Center
over a single inexpensive CAT5e type cable. Computer resolutions up to 1920 x
1200 pixels at 60 Hz are supported over cable runs up to 450 feet (137 meters).
Audio signals are transmitted digitally with high performance 24-bit resolution.
QuickMedia dramatically simplifies system design and installation, affording a
higher level of performance at a lower overall cost.
NOTE: For QuickMedia wiring use CresCAT-QM, CresCAT-IM or quality
Cat5e/CAT6 cable. The maximum aggregate cable length and delay skew between
any QM transmitter (origination point) and QM receiver (endpoint) is 450 feet (137
meters) and 22 ns. A maximum of two QM midpoint devices may be inserted in a
given QM signal path (exceptions apply, refer to each respective product manual for
full details).
MediaManager System Integration
Whether using just one FlipTop box or several, complete system operation can be
made transparent to the end user with all signal routing occurring smoothly under the
command of the MediaManager control system. Built-in video sensing can be
utilized to trigger automatic input selection and power control. Complete
2 •QuickMedia™ FlipTop Computer Center: QM-FTCC Operations & Installation Guide – DOC. 6313B

Crestron QM-FTCC QuickMedia™ FlipTop Computer Center
MediaManager systems are easy to design, program and adjust from start to finish
using Crestron SystemBuilder™ software.
Cresnet®
Cresnet is the communications backbone for many Crestron touchpanels, keypads,
lighting controls and other devices. The Cresnet bus is a simple, yet flexible 4-wire
network that provides rock-solid bidirectional communication and power for up to
252 Cresnet devices.
Operations & Installation Guide – DOC. 6313B QuickMedia™ FlipTop Computer Center: QM-FTCC •3

QuickMedia™ FlipTop Computer Center Crestron QM-FTCC
Internal Block Diagram
The following diagram represents the interfacing abilities of the QM-FTCC. This
Cresnet device uses QuickMedia technology to facilitate simplified connection of
audio, video and computer equipment. All media and control signals are routed via a
single QuickMedia cable for easy installation. A complete integrated room solution
is created with the addition of a QuickMedia receiver (such as the QM-RMCRX-BA,
sold separately) and optional keypads or touchpanels.
NOTE: The QM-FTCC is compatible with 2-Series control systems only.
Internal Block Diagram of the QM-FTCC (with Keypad)
4 •QuickMedia™ FlipTop Computer Center: QM-FTCC Operations & Installation Guide – DOC. 6313B

Crestron QM-FTCC QuickMedia™ FlipTop Computer Center
Specifications
Specifications for the QM-FTCC are listed in the following table.
QM-FTCC Specifications
SPECIFICATION DETAILS
Video
Signal Types RGB and component video1
RGB Formats RGBHV, RGBS or RGsB
Video/HDTV Formats NTSC or PAL, HDTV up to 1080i/1080p1
Gain 0 dB (75 ohms termination)
Maximum Resolution 1920 x 1200 @ 60 Hz (at unity gain) with
maximum cable length of 450 feet (137
meters) and maximum compensation at
receiver
Audio
Features Stereo audio input,
2-channel gated mic preamp
Mic Input Gain 0 to 100% (40 dB range) plus mute
Gate Level (Threshold) 0 to 100%
Attack 0 to 100 ms
Decay (Release) 0 to 5000 ms
A-D Conversion 24-bit, 48 kHz
Frequency Response 20 Hz to 20 kHz
Power Requirements
Cresnet Power Usage 8 Watts (0.33 Amp @ 24 Volts DC)
Default Net ID 1A
Minimum 2-Series Control
System Update File2, 3
Version 3.137 (for QM-RMCRX-BA) or later
Environmental
Temperature 41° to 104° F (5° to 40° C)
Humidity 10% to 90% RH (non-condensing)
Heat Dissipation 27 BTU/Hr
Enclosure Black painted metal with black anodized or
brushed aluminum cover; flush tabletop
mountable
Dimensions (Domestic Models)
Height 5.39 in (13.69 cm) – with lid closed
Width 6.75 in (17.14 cm)
Depth 5.71 in (14.50 cm) – without mounting
brackets
Dimensions
(International Models)
Height 5.58 in (14.17 cm) – with lid closed
Width 8.50 in (21.58 cm)
Depth 6.67 in (16.95 cm) – without mounting
brackets
(Continued on following page)
Operations & Installation Guide – DOC. 6313B QuickMedia™ FlipTop Computer Center: QM-FTCC •5

QuickMedia™ FlipTop Computer Center Crestron QM-FTCC
QM-FTCC Specifications (Continued)
SPECIFICATION DETAILS
Weight (Domestic Models) 4.05 lbs (1.84 kg)
Weight (International Models) 4.80 lbs (2.18 kg)
Available Models (Domestic)
QM-FTCC-B QuickMedia FlipTop Computer Center with
Keypad, Black Anodized
QM-FTCC-BALUM QuickMedia FlipTop Computer Center with
Keypad, Brushed Aluminum
QM-FTCC-NB-B QuickMedia FlipTop Computer Center,
without Keypad, Black Anodized
QM-FTCC-NB-BALUM QuickMedia FlipTop Computer Center,
without Keypad, Brushed Aluminum
Available Models (International)
QMI-FTCC-B QuickMedia FlipTop Computer Center with
Keypad, Black Anodized
QMI-FTCC-BALUM QuickMedia FlipTop Computer Center with
Keypad, Brushed Aluminum
Available Accessories
FT-BTNB-L (1) Large engravable button cap4
FT-BTNB-S (2) Small engravable button caps4
QM-FTCMK FlipTop Cable Management Kit
QMI-FTCMK FlipTop Cable Management Kit
(International version)
International Adaptors for
QMI-FTCC models
Refer to “Appendix A: International
Receptacles” on page 37.
1. Component video or HDTV may require a suitable VGA-to-component adaptor or breakout cable (not
included).
2. The latest software versions can be obtained from the Crestron website. Refer to the NOTE following
these footnotes.
3. Crestron 2-Series control systems include the AV2 and PRO2. Consult the latest Crestron Product
Catalog for a complete list of 2-Series control systems.
4. Keypad models only.
NOTE: Crestron software and any files on the website are for authorized Crestron
dealers and Crestron Authorized Independent Programmers (CAIP) only. New users
may be required to register to obtain access to certain areas of the site (including the
FTP site).
6 •QuickMedia™ FlipTop Computer Center: QM-FTCC Operations & Installation Guide – DOC. 6313B

Crestron QM-FTCC QuickMedia™ FlipTop Computer Center
Physical Description
This section provides information on the connections, controls and indicators
available on your QM-FTCC.
QM-FTCC Physical View (Top Open)
QM-FTCC Overall Dimensions (Top View) QMI-FTCC Overall Dimensions (Top View)
Operations & Installation Guide – DOC. 6313B QuickMedia™ FlipTop Computer Center: QM-FTCC •7

QuickMedia™ FlipTop Computer Center Crestron QM-FTCC
QM-FTCC-NB (Top View)
NOTE: The physical dimensions of the NB models are identical to the models with
keypad.
QM-FTCC Overall Dimensions (Front View) QMI-FTCC Overall Dimensions (Front View)
8 •QuickMedia™ FlipTop Computer Center: QM-FTCC Operations & Installation Guide – DOC. 6313B

Crestron QM-FTCC QuickMedia™ FlipTop Computer Center
QM-FTCC (Bottom View) QMI-FTCC (Bottom View)
QM-FTCC Overall Dimensions (Rear View) QMI-FTCC Overall Dimensions (Rear View)
4.58 in
(11.62 cm)
5.58 in
(14.17 cm
)
2.99 in
(7.60 cm)
2.31 in
(5.88 cm)
4.31 in
(10.95 cm)
5.39 in
(13.68 cm)
Operations & Installation Guide – DOC. 6313B QuickMedia™ FlipTop Computer Center: QM-FTCC •9

QuickMedia™ FlipTop Computer Center Crestron QM-FTCC
QM-FTCC Overall Dimensions (Side View) QMI-FTCC Overall Dimensions (Side View)
4.63 in
(11.77 cm)
5.21 in
(13.22 cm)
5.51 in
(14.00 cm)
6.17 in
(15.68 cm)
Wire Leads
QM-FTCC Connectors, Controls & Indicators
(Top View)
QM-FTCC Connectors, Controls & Indicators
(Bottom View)
56
4
2
3
1
8
7
11 12 13 14 15
10
9
10 •QuickMedia™ FlipTop Computer Center: QM-FTCC Operations & Installation Guide – DOC. 6313B

Crestron QM-FTCC QuickMedia™ FlipTop Computer Center
Connectors, Controls & Indicators
# CONNECTORS1,
CONTROLS &
INDICATORS
DESCRIPTION
1 KEYPAD2Programmable keypad allowing variable
combinations of large and small engravable
buttons, 10 minimum (all large) to 20
maximum (all small); ships with 10 large
buttons (small buttons and engraving sold
separately)
(1) red LED per button, programmable
2 PWR LED2(1) Green LED, indicates 24 Volts DC power
supplied from Cresnet control network
3 NET LED2(1) Yellow LED, indicates communication
with Cresnet system
4 BAR GRAPHS2(2) Red 8-segment LED bar graphs,
programmable
5
(QM)
125V (1) Grounded AC socket, AC power pass
through outlet
Maximum load: 10 Amps @ 125 Volts AC,
50/60 Hz
5
(QMI)
MAX 250V
(1) Grounded AC socket, AC power pass
through outlet
Specify socket type: PWR-AU-B
(Australia/China), PWR-EU-B (Europe
“Schuko”), PWR-FR-B (France), PWR-IT-B
(Italy) or PWR-UK-B (UK)
Maximum load: 10 Amps @ 250 Volts AC,
50/60 Hz
6 AUDIO
(1) 3.5 mm TRS mini phone jack
Unbalanced stereo line level audio input
Minimum input level: 1 Vrms
Input impedance: 10k ohms
7
COMPUTER3
Pin 1
Pin 6
Pin 15
(1) DB15HD female
RGB(VGA)/component video4input
Formats: RGBHV, RGBS, RGsB, YPbPr
Input impedance: 75 ohms
H/V sync impedance: 1k ohms
Maximum input level: 1 Vp-p
Maximum H/V sync level 5 Vp-p
Signal detection on H, Y and Gs
(Continued on following page)
Operations & Installation Guide – DOC. 6313B QuickMedia™ FlipTop Computer Center: QM-FTCC •11

QuickMedia™ FlipTop Computer Center Crestron QM-FTCC
Connectors, Controls & Indicators (Continued)
# CONNECTORS1,
CONTROLS &
INDICATORS
DESCRIPTION
8 LAN
81
(1) 8-pin RJ-45 female, Ethernet LAN pass
through jack for connection to Ethernet,
providing local area network or Web access
(cable not included)
PIN SIGNALS
1 TD+
2 TD-
3 RD+
4 Connected to pin 5
5 Connected to pin 4
6 RD-
7 Connected to pin 8
8 Connected to pin 7
9
(QM)
125 V (1) 9 foot grounded AC line cord
Passes through to front panel AC power
outlet
9
(QMI)
MAX 250 V (1) IEC socket
Passes through to front panel AC power
outlet
10 NET
(2) Four-position terminal block connectors
for data and power. Connects to Cresnet
control network.
Pin 1 (24) Power (24 Volts DC)
Pin 2 (Y) Data
Pin 3 (Z) Data
Pin 4 (G) Ground
11 SETUP LED &
BUTTON
(1) Red LED and miniature pushbutton, used
for touch-settable ID (TSID)
Used for setting network ID during initial
configuration or when the device is being
added/replaced.
12 MIC/LINE (1 – 2)
G
-+-
+
(2) 5-pin 3.5 mm detachable terminal blocks
Balanced microphone/line inputs
Balanced mic input level: -60 to - 20 dBV
nominal
Balanced line input level: -28 to + 12 dBV;
4 Vrms maximum
Unbalanced line input level: -34 to + 6 dBV;
2 Vrms maximum
Mic input impedance: 10k ohms, accepts 60
to 600 ohm source
Line input impedance: 22k ohms balanced,
11k ohms unbalanced
Phantom power: 10 mA (total) @ 48 Volts
DC, software enabled to both MIC inputs
(Continued on following page)
12 •QuickMedia™ FlipTop Computer Center: QM-FTCC Operations & Installation Guide – DOC. 6313B

Crestron QM-FTCC QuickMedia™ FlipTop Computer Center
Connectors, Controls & Indicators (Continued)
# CONNECTORS1,
CONTROLS &
INDICATORS
DESCRIPTION
13 QM5
81
(1) 8-wire RJ-45 female, QuickMedia output
port
Connects to QM input port of any
QuickMedia device via CresCAT-QM or
CresCAT-IM cable6
14 (1) 8-pin RJ-45 female, Ethernet LAN pass
through to front panel LAN port (cable not
included)
LAN
81
PIN SIGNALS
1 TD+
2 TD-
3 RD+
4 Connected to pin 5
5 Connected to pin 4
6 RD-
7 Connected to pin 8
8 Connected to pin 7
15 G
(1) 6-32 screw, chassis ground lug
1. Interface connectors for NET and MIC/LINE ports are provided with the unit.
2. Keypad models only.
3. Refer to the following table for RGB DB15HD pin assignments:
PIN FUNCTION PIN FUNCTION PIN FUNCTION
1 Red Video 6 Red Ground 11 No Connect
2 Green Video 7 Green Ground 12 Monitor Sense 1
3 Blue Video 8 Blue Ground 13 Horizontal Sync
4 Reserved 9 No Connect 14 Vertical Sync
5 Ground 10 Ground 15 Monitor Sense 2
4. Component video or HDTV may require a suitable VGA-to-component adapter or breakout cable (not
included).
5. The eight-pin RJ-45 QuickMedia transport port accepts CAT5E/CAT6 carrying audio, video and
microphone signals. The QM input port conforms to the 568B wiring standard. Refer to the following
table for connector pinouts.
RJ-45 PIN
NUMBER
WIRE COLORS
(EIA 568B) QM ASSIGNMENT: RGB
QM ASSIGNMENT:
COMPOSITE, S-VIDEO,
COMPONENT AND AUDIO
1 WHITE/ORANGE
- RGB RED - CHROMINANCE (- Pr)
2 ORANGE + RGB RED + CHROMINANCE (+ Pr)
3 WHITE/GREEN
- RGB GREEN - LUMINANCE (- Y)
4 BLUE + DIGITAL AUDIO + AUDIO
5 WHITE/BLUE - DIGITAL AUDIO - AUDIO
6 GREEN + RGB GREEN + LUMINANCE (+ Y)
7 WHITE/BROWN
- RGB BLUE - COMPOSITE (- Pb)
8 BROWN + RGB BLUE + COMPOSITE (+ Pb)
6. For QuickMedia wiring use CresCAT-QM, CresCAT-IM or quality CAT5e/CAT6 cable; the
maximum aggregate cable length and delay skew between any QM transmitter (origination point) and
receiver (endpoint) is 450 feet (137 meters) and 22 ns; a maximum of two QM midpoint devices may
Operations & Installation Guide – DOC. 6313B QuickMedia™ FlipTop Computer Center: QM-FTCC •13

QuickMedia™ FlipTop Computer Center Crestron QM-FTCC
be inserted in a given QM signal path (exceptions apply, refer to each respective product manual for
full details).
Industry Compliance
This product (QM- only) is Listed to applicable UL Standards and requirements by
Underwriters Laboratories Inc.
(E300530)
As of the date of manufacture the QMI-FTCC has been tested and found to comply
with specifications for CE marking and standards per EMC and
Radiocommunications Compliance Labelling.
NOTE: This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful interference and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
 Consult the dealer or an experienced radio/TV technician for help.
14 •QuickMedia™ FlipTop Computer Center: QM-FTCC Operations & Installation Guide – DOC. 6313B

Crestron QM-FTCC QuickMedia™ FlipTop Computer Center
Setup
Network Wiring
When wiring the Cresnet®network, consider the following:
• Use Crestron Certified Wire.
• Use Crestron power supplies for Crestron equipment.
• Provide sufficient power to the system.
CAUTION: Insufficient power can lead to unpredictable results or damage
to the equipment. Please use the Crestron Power Calculator to help calculate
how much power is needed for the system (www.crestron.com/calculators).
• For larger networks, use a Cresnet Hub/Repeater (CNXHUB) to maintain
signal quality.
For more details, refer to “Check Network Wiring” which starts on page 34.
QuickMedia Wiring
The Crestron QuickMedia cable (sold under the name “CresCAT-QM”) contains one
CAT5E cable and one Cresnet cable in Siamese jackets. Installation of any QM
device is as simple as installing CresCAT-QM wires from the output of one device to
the input of another. Installations are flexible, affordable and fast. For more
information, refer to the latest revision of the Crestron MediaManager Applications
Guide (Doc. 6244), which is available for download from the Crestron website
(www.crestron.com/manuals).
CresCAT-QM Cable
CresCAT-QM
Cable
NOTE: Do not untwist the two wires in a single pair for more than 1/3-1/2”
(0.84-1.27 cm) when making a connection. The twists are critical to canceling out
interference between the wires.
Operations & Installation Guide – DOC. 6313B QuickMedia™ FlipTop Computer Center: QM-FTCC •15

QuickMedia™ FlipTop Computer Center Crestron QM-FTCC
The aggregate cable length of a signal path originating at a QM-FTCC and
terminating at a QM receiver must not exceed 450 feet (137 meters). Video signals
may experience a loss of quality over very long lengths of cable. This phenomenon is
due to the added resistance and capacitance of longer cable lengths and is not
peculiar to either Crestron and/or QuickMedia systems. To ensure sufficient
bandwidth, the maximum aggregate cable length should not exceed 450 feet. The use
of lower-resolution signals may allow increased cable length but must be tested by
the installer with the sources to be used. The QM pin assignment is based on the
EIA/TIA 568B RJ-45 Jack standard.
NOTE: When using CresCAT-QM wiring, four additional wires are included for
making Cresnet connections.
When connecting multiple QM devices, the route between a QM origination point
(transmitter) and a QM endpoint (receiver) cannot have more than two midpoints
(e.g. QM-MD7x2 or other QM switchers). Refer to the following diagram when
configuring a QM network.
NOTE: The aggregate length from transmitter to receiver cannot have a delay skew
of more than 22 ns.
NOTE: When used with a QM-RMCRX, delay skew should not exceed 15 ns.
QM Network Topology
QM-RMCRX-BA
QM-TX
QM
QM QM
QM
QM
Origination Points Endpoints
QM
Midpoints
QM-FTCC
QM-MD7x2QM-MD7x2
QM-WMC
QM-RX
Identity Code
The Net ID of the QM-FTCC has been factory set to 1A. The Net IDs of multiple
QM-FTCC devices in the same system must be unique. Net IDs are changed from a
personal computer (PC) via Crestron Toolbox™ (refer to “Establishing
Communication” on page 31).
When setting the Net ID, consider the following:
• The Net ID of each unit must match an ID code specified in the SIMPL™
Windows®program.
• Each network device must have a unique Net ID.
For more details, refer to the Crestron Toolbox help file.
16 •QuickMedia™ FlipTop Computer Center: QM-FTCC Operations & Installation Guide – DOC. 6313B